AHA(4) Kernel Interfaces Manual AHA(4) NAME aha -- Adaptec SCSI host adapter driver SYNOPSIS device aha0 at isa? port ? irq ? drq 5 device scbus0 at aha0 DESCRIPTION This driver provides access to the SCSI bus connected to an Adaptec 1510, 152x, 1535, 154xA, 154xB, 154xC, 154xCF, 154xCP, or 164x host adapter. Host adapters supporting a 154x compatible interface, such as some Tekram controllers and the Adaptec 174x in 154x emulation mode can also be at- tached with this driver. For optimum performance, Adaptec 174x controllers should be configured in enhanced mode and attached via the ahb(4) driver. One kernel config entry for every card to be attached by the system is re- quired. Specific values for the port address, irq, and drq may be speci- fied. If wildcard values are used, the driver will query the device for its current settings and use those. If the port address is a wildcard, the driver consults an internal table of possible port address locations and attaches to the first unattached card it finds. The possible port ad- dresses for this card are 0x330, 0x334, 0x230, 0x234, 0x130, and 0x134. SEE ALSO ahb(4), ahc(4), cd(4), da(4), sa(4), scsi(4) AUTHORS The aha driver was ported by M. Warner Losh from the bt driver written by Justin T. Gibbs. FreeBSD 4.11 October 15, 1998 AHA(4)
NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=aha&sektion=4&manpath=FreeBSD+4.11-RELEASE>