home | help
TX(4)			  i386 Kernel Interfaces Manual 		   TX(4)

NAME
     tx -- SMC 83c17x Fast Ethernet device driver

SYNOPSIS
     device miibus
     device tx

DESCRIPTION
     The  tx  driver provides support for the Ethernet adapters based on the SMC
     83c17x (EPIC) chips.  These are mostly SMC 9432 series cards.

     The tx driver supports the following media types (depending on card's capa-
     bilities):

     autoselect       Enable autonegotiation (default)

     100baseFX	      Set 100Mbps (fast ethernet) fiber optic operation

     100baseTX	      Set 100Mbps (fast ethernet) twisted pair operation

     10baseT/UTP      Set 10Mbps on 10baseT port

     10base2/BNC      Set 10Mbps on 10base2 port

     The tx driver supports the following media options:

     full-duplex      Set full-duplex operation

     Driver supports oversized ethernet packets (up to 1600  bytes).   Refer  to
     the ifconfig(8) man page on setting the interface's MTU.

     The old ``ifconfig tx0 linkN'' method of configuration is not supported.

   VLAN (IEEE 802.1Q) support
     The  tx driver supports the VLAN operation (using vlan(4) inteface) without
     decreasing the MTU on the vlan(4) interfaces.

DIAGNOSTICS
     tx%d: device timeout %d packets  The device stops responding.   Device  and
     driver reset follows this error.

     tx%d:  PCI  fatal	error occured (%s)  One of following errors occured: PCI
     Target Abort, PCI Master Abort, Data Parity Error or Address Parity  Error.
     Device and driver reset follows this error.

     tx%d:  cannot  allocate mbuf header/cluster  Cannot allocate memory for re-
     ceived packet.  Packet thrown away.

     tx%d: can't stop %s DMA  While reseting, driver failed to stop device  cor-
     rectly.

BUGS
     The multicast packets filtering is not supported.

SEE ALSO
     arp(4), netintro(4), ng_ether(4), ifconfig(8)

FreeBSD 4.5			February 8, 2001			   TX(4)

home | help