home | help
TXP(4)			     Kernel Interfaces Manual			  TXP(4)

NAME
     txp -- 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface

SYNOPSIS
     device txp

DESCRIPTION
     The  txp  interface provides access to the 10Mb/s and 100Mb/s Ethernet net-
     works via the 3Com Typhoon/Sidewinder chipset.  This  driver  supports  the
     following cards:

	   *   3Com 3CR990-TX-95
	   *   3Com 3CR990-TX-97
	   *   3Com 3cR990B-TXM
	   *   3Com 3CR990SVR95
	   *   3Com 3CR990SVR97
	   *   3Com 3cR990B-SRV

     Basic  Ethernet  functions  are provided as well as support for vlan(4) tag
     removal and insertion assistance, receive ip(4), tcp(4), and udp(4)  check-
     sum offloading, and transmit ip(4) checksum offloading.  There is currently
     no  support  for transmit tcp(4) or udp(4) checksum offloading, tcp(4) seg-
     mentation, nor ipsec(4) acceleration.  Note that hardware	checksumming  is
     only used when the interface is not in bridge(4) mode.

     Each  of  the  host's  network  addresses is specified at boot time with an
     SIOCSIFADDR ioctl(2).  The txp interface  employs	the  address  resolution
     protocol described in arp(4) to dynamically map between Internet and Ether-
     net addresses on the local network.

     When a txp interface is brought up, by default, it will attempt to auto-ne-
     gotiate  the  link speed and duplex mode.	The speeds, in order of attempt,
     are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full Duplex, and  10
     Mb/s Half Duplex.

     The  txp  supports  several  media types, which are selected via the ifcon-
     fig(8) command.  The supported media types are:

     media autoselect
	     Attempt to autoselect the media type (default)

     media 100baseTX mediaopt full-duplex
	     Use 100baseTX, full duplex

     media 100baseTX [mediaopt half-duplex]
	     Use 100baseTX, half duplex

     media 10baseT mediaopt full-duplex
	     Use 10baseT, full duplex

     media 10baseT [mediaopt half-duplex]
	     Use 10baseT, half duplex

SEE ALSO
     arp(4), ifmedia(4), inet(4), intro(4), ip(4), tcp(4), udp(4), vlan(4),  if-
     config(8)

HISTORY
     The txp driver first appeared in OpenBSD 2.9.

FreeBSD 4.5			 April 15, 2001 			  TXP(4)

home | help