home | help
FSTAB(5)		       File Formats Manual			FSTAB(5)

NAME
     fstab -- static information about the file systems

SYNOPSIS
     #include <fstab.h>

DESCRIPTION
     The file fstab contains descriptive information about the various file sys-
     tems.   fstab  is only read by programs, and not written; it is the duty of
     the system administrator to properly create and maintain this  file.   Each
     file  system is described on a separate line; fields on each line are sepa-
     rated by tabs or spaces.  The order of records in fstab  is  important  be-
     cause  fsck(8),  mount(8), and umount(8) sequentially iterate through fstab
     doing their thing.

     The first field, (fs_spec), describes the block special  device  or  remote
     file  system to be mounted.  For file systems of type ufs, the special file
     name is the block special file name, and not  the	character  special  file
     name.  If a program needs the character special file name, the program must
     create  it  by  appending	a ``r'' after the last ``/'' in the special file
     name.

     The second field, (fs_file), describes the mount point for the file system.
     For swap partitions, this field should be specified as ``none''.

     The third field, (fs_vfstype), describes the type of the file system.   The
     system  can  support  various  file system types.	Only the root, /usr, and
     /tmp file systems need be statically compiled into the  kernel;  everything
     else  will be automatically loaded at mount time.	(Exception: the UFS fam-
     ily - FFS and LFS cannot currently be demand-loaded.)   Some  people  still
     prefer to statically compile other file systems as well.

     The  fourth field, (fs_mntops), describes the mount options associated with
     the file system.  It is formatted as a comma separated list of options.  It
     contains at least the type of mount (see fs_type below) plus any additional
     options appropriate to the file system type.  See the options flag (-o)  in
     the  mount(8) page and the file system specific page, such as mount_nfs(8),
     for additional options that may be specified.

     If the options ``userquota'' and/or ``groupquota'' are specified, the  file
     system  is  automatically	processed by the quotacheck(8) command, and user
     and/or group disk quotas are enabled with	quotaon(8).   By  default,  file
     system  quotas  are  maintained  in  files named quota.user and quota.group
     which are located at the root of the associated  file  system.   These  de-
     faults  may  be  overridden by putting an equal sign and an alternative ab-
     solute pathname following the quota option.  Thus, if the user  quota  file
     for  /tmp is stored in /var/quotas/tmp.user, this location can be specified
     as:

	   userquota=/var/quotas/tmp.user

     If the option ``noauto'' is specified, the file system will not be automat-
     ically mounted at system startup.	Note that, for network file  systems  of
     third party types (i.e. types supported by additional software not included
     in  the  base  system)  to  be automatically mounted at system startup, the
     extra_netfs_types rc.conf(5) variable must be  used  to  extend  the  rc(8)
     startup script's list of network file system types.

     The type of the mount is extracted from the fs_mntops field and stored sep-
     arately  in the fs_type field (it is not deleted from the fs_mntops field).
     If fs_type is ``rw'' or ``ro'' then the file system whose name is given  in
     the fs_file field is normally mounted read-write or read-only on the speci-
     fied  special  file.   If	fs_type  is ``sw'' then the special file is made
     available as a piece of swap space by the swapon(8) command at the  end  of
     the system reboot procedure.  The fields other than fs_spec and fs_type are
     unused.   If  fs_type is specified as ``xx'' the entry is ignored.  This is
     useful to show disk partitions which are currently unused.

     The fifth field, (fs_freq), is used for these file systems by  the  dump(8)
     command  to  determine  which file systems need to be dumped.  If the fifth
     field is not present, a value of zero is returned and dump will assume that
     the file system does not need to be dumped.

     The sixth field, (fs_passno), is used by the fsck(8) program  to  determine
     the  order  in  which file system checks are done at reboot time.	The root
     file system should be specified with a fs_passno of 1, and other file  sys-
     tems  should  have  a  fs_passno of 2.  File systems within a drive will be
     checked sequentially, but file systems on different drives will be  checked
     at  the same time to utilize parallelism available in the hardware.  If the
     sixth field is not present or is zero, a value  of  zero  is  returned  and
     fsck(8) will assume that the file system does not need to be checked.

     #define FSTAB_RW	     "rw"    /* read/write device */
     #define FSTAB_RQ	     "rq"    /* read/write with quotas */
     #define FSTAB_RO	     "ro"    /* read-only device */
     #define FSTAB_SW	     "sw"    /* swap device */
     #define FSTAB_XX	     "xx"    /* ignore totally */

     struct fstab {
	     char    *fs_spec;	     /* block special device name */
	     char    *fs_file;	     /* file system path prefix */
	     char    *fs_vfstype;    /* File system type, ufs, nfs */
	     char    *fs_mntops;     /* Mount options ala -o */
	     char    *fs_type;	     /* FSTAB_* from fs_mntops */
	     int     fs_freq;	     /* dump frequency, in days */
	     int     fs_passno;      /* pass number on parallel fsck */
     };

     The  proper  way  to  read  records from fstab is to use the routines getf-
     sent(3), getfsspec(3), getfstype(3), and getfsfile(3).

FILES
     /etc/fstab  The file fstab resides in /etc.

SEE ALSO
     getfsent(3), getvfsbyname(3), dump(8),  fsck(8),  mount(8),  quotacheck(8),
     quotaon(8), swapon(8), umount(8)

HISTORY
     The fstab file format appeared in 4.0BSD.

FreeBSD 5.0			  June 5, 1993				FSTAB(5)

home | help