home | help
LPC(8)			     System Manager's Manual			  LPC(8)

NAME
     lpc -- line printer control program

SYNOPSIS
     lpc [command [argument ...]]

DESCRIPTION
     The  lpc  utility is used by the system administrator to control the opera-
     tion of the line printer system.	For  each  line  printer  configured  in
     /etc/printcap, lpc may be used to:

	   *   disable or enable a printer,

	   *   disable or enable a printer's spooling queue,

	   *   rearrange the order of jobs in a spooling queue,

	   *   find the status of printers, and their associated spooling queues
	       and printer daemons,

	   *   change  the status message for printer queues (the status message
	       may be seen by users as part of the output of  the  lpq(1)  util-
	       ity).

     Without  any  arguments, lpc will prompt for commands from the standard in-
     put.  If arguments are supplied, lpc interprets the  first  argument  as  a
     command  and  the	remaining  arguments  as parameters to the command.  The
     standard input may be redirected causing lpc to read  commands  from  file.
     Commands  may  be abbreviated; the following is the list of recognized com-
     mands.

     ? [command ...]
     help [command ...]
	     Print a short description of each command specified in the argument
	     list, or, if no argument is given, a list of  the	recognized  com-
	     mands.

     abort {all | printer}
	     Terminate	an  active spooling daemon on the local host immediately
	     and then  disable	printing  (preventing  new  daemons  from  being
	     started by lpr(1)) for the specified printers.

     bottomq printer [jobspec ...]
	     Take the specified jobs in the order specified and move them to the
	     bottom of the printer queue.  Each jobspec can match multiple print
	     jobs.  The full description of a jobspec is given below.

     clean {all | printer}
	     Remove any temporary files, data files, and control files that can-
	     not  be printed (i.e., do not form a complete printer job) from the
	     specified printer queue(s) on the local machine.  This command will
	     also look for core files in spool directory for each printer queue,
	     and list any that are found.  It will not remove  any  core  files.
	     See also the tclean command.

     disable {all | printer}
	     Turn  the	specified printer queues off.  This prevents new printer
	     jobs from being entered into the queue by lpr(1).

     down {all | printer ...} -msg message ...
     down {all | printer} message ...
	     Turn the specified printer queue  off,  disable  printing	and  put
	     message  in the printer status file.  When specifying more than one
	     printer queue, the -msg argument is required to separate  the  list
	     of printers from the text that will be the new status message.  The
	     message  doesn't  need  to  be  quoted, the remaining arguments are
	     treated like echo(1).  This is normally  used  to	take  a  printer
	     down, and let other users find out why it is down (the lpq(1) util-
	     ity  will indicate that the printer is down and will print the sta-
	     tus message).

     enable {all | printer}
	     Enable spooling on the local queue for the listed	printers.   This
	     will allow lpr(1) to put new jobs in the spool queue.

     exit
     quit    Exit from lpc.

     restart {all | printer}
	     Attempt  to  start  a new printer daemon.	This is useful when some
	     abnormal condition causes the daemon to die  unexpectedly,  leaving
	     jobs  in  the  queue.   lpq(1)  will report that there is no daemon
	     present when this condition occurs.  If the user is the super-user,
	     try to abort the current daemon first (i.e.,  kill  and  restart  a
	     stuck daemon).

     setstatus {all | printer} -msg message ...
	     Set  the status message for the specified printers.  The -msg argu-
	     ment is required to separate the list of  printers  from  the  text
	     that  will  be  the  new  status message.	This is normally used to
	     change the status message when the printer queue is no  longer  ac-
	     tive  after printing has been disabled, and you want to change what
	     users will see in the output of the lpq(1)utility.

     start {all | printer}
	     Enable printing and start a spooling daemon for the  listed  print-
	     ers.

     status {all | printer}
	     Display the status of daemons and queues on the local machine.

     stop {all | printer}
	     Stop  a spooling daemon after the current job completes and disable
	     printing.

     tclean {all | printer}
	     This will do a test-run of the clean command.  All the same  check-
	     ing  is  done,  but the command will only print out messages saying
	     what a similar clean command would do if the user typed it in.   It
	     will not remove any files.  Note that the clean command is a privi-
	     leged command, while the tclean command is not restricted.

     topq printer [jobspec ...]
	     Take the specified jobs in the order specified and move them to the
	     top  of  the  printer queue.  Each jobspec can match multiple print
	     jobs.  The full description of a jobspec is given below.

     up {all | printer}
	     Enable everything and start a new printer daemon.	Undoes	the  ef-
	     fects of down.

     Commands  such  as topq and bottomq can take one or more jobspec to specify
     which jobs the command should operate on.	A jobspec can be:

     *	 a single job number, which will match all jobs in the	printer's  queue
	 which have the same job number.  Eg: 17,

     *	 a range of job numbers, which will match all jobs with a number between
	 the starting and ending job numbers, inclusive.  Eg: 21-32,

     *	 a  specific  userid,  which will match all jobs which were sent by that
	 user.	Eg: jones,

     *	 a host name, when prefixed by an `@', which will match all jobs in  the
	 queue which were sent from the given host.  Eg: @freebsd.org,

     *	 a job range and a userid, separated by a `:', which will match all jobs
	 which	both  match  the  job range and were sent by the specified user.
	 Eg: jones:17 or 21-32:jones,

     *	 a job range and/or a userid, followed by a host name, which will  match
	 all jobs which match all the specified criteria.  Eg: jones@freebsd.org
	 or 21-32@freebsd.org or jones:17@freebsd.org.

     The values for userid and host name can also include pattern-matching char-
     acters,  similar to the pattern matching done for filenames in most command
     shells.  Note that if you enter a topq or bottomq command as parameters  on
     the  initial  lpc	command, then the shell will expand any pattern-matching
     characters that it can (based on what files in finds in the current  direc-
     tory) before lpc processes the command.  In that case, any parameters which
     include  pattern-matching	characters should be enclosed in quotes, so that
     the shell will not try to expand them.

FILES
     /etc/printcap	 printer description file
     /var/spool/*	 spool directories
     /var/spool/*/lock	 lock file for queue control

SEE ALSO
     lpq(1), lpr(1), lprm(1), printcap(5), chkprintcap(8), lpd(8)

DIAGNOSTICS
     ?Ambiguous command  abbreviation matches more than one command

     ?Invalid command  no match was found

     ?Privileged command  you must be a member of group "operator"  or	root  to
     execute this command

HISTORY
     The lpc utility appeared in 4.2BSD.

FreeBSD 5.0			  July 16, 2002 			  LPC(8)

home | help