home | help
STAT(1) 		     General Commands Manual			 STAT(1)

NAME
     stat, readlink -- display file status

SYNOPSIS
     stat [-FLnq] [-f format | -l | -r | -s | -x] [-t timefmt] [file ...]
     readlink [-n] [file ...]

DESCRIPTION
     The  stat	utility  displays information about the file pointed to by file.
     Read, write or execute permissions of the named file are not required,  but
     all directories listed in the path name leading to the file must be search-
     able.   If  no  argument is given, stat displays information about the file
     descriptor for standard input.

     When invoked as readlink, only the target of the symbolic link is	printed.
     If  the  given argument is not a symbolic link, readlink will print nothing
     and exit with an error.

     The information displayed is obtained by calling lstat(2)	with  the  given
     argument and evaluating the returned structure.

     The options are as follows:

     -F      As  in ls, display a slash (/) immediately after each pathname that
	     is a directory, an asterisk (*) after each that is  executable,  an
	     at sign (@) after each symbolic link, a percent sign (%) after each
	     whiteout,	an  equal sign (=) after each socket, and a vertical bar
	     (|) after each that is a FIFO.  The use of -F implies -l.

     -L      Use stat(2) instead of lstat(2).  The information reported by  stat
	     will  refer  to the target of file, if file is a symbolic link, and
	     not to file itself.

     -n      Do not force a newline to appear at the end of each piece	of  out-
	     put.

     -q      Suppress  failure	messages  if  calls to stat(2) or lstat(2) fail.
	     When run as readlink, error messages are automatically suppressed.

     -f format
	     Display information using the specified format.   See  the  FORMATS
	     section for a description of valid formats.

     -l      Display output in ls -lT format.

     -r      Display  raw information.	That is, for all the fields in the stat-
	     structure, display the raw, numerical value (for example, times  in
	     seconds since the epoch, etc.)

     -s      Display  information in ``shell output'', suitable for initializing
	     variables.

     -x      Display information in a more verbose way as known from some  Linux
	     distributions.

     -t timefmt
	     Display  timestamps  using  the  specified  format.  This format is
	     passed directly to strftime(3).

   FORMATS
     Format strings are similar to printf(3) formats in that they start with  %,
     are  then	followed  by  a  sequence of formatting characters, and end in a
     character that selects the field of the struct stat which is to be  format-
     ted.  If the % is immediately followed by one of n, t, %, or @, then a new-
     line  character,  a tab character, a percent character, or the current file
     number is printed, otherwise the string is examined for the following:

     Any of the following optional flags:

     #	     Selects an alternate output form for octal and hexadecimal  output.
	     Non-zero  octal output will have a leading zero, and non-zero hexa-
	     decimal output will have ``0x'' prepended to it.

     +	     Asserts that a sign indicating whether a number is positive or neg-
	     ative should always be printed.  Non-negative numbers are not  usu-
	     ally printed with a sign.

     -	     Aligns  string  output  to the left of the field, instead of to the
	     right.

     0	     Sets the fill character for left padding to the  0  character,  in-
	     stead of a space.

     space   Reserves a space at the front of non-negative signed output fields.
	     A `+' overrides a space if both are used.

     Then the following fields:

     size    An  optional  decimal  digit  string  specifying  the minimum field
	     width.

     prec    An optional precision composed of a decimal point `.' and a decimal
	     digit string that indicates the maximum string length,  the  number
	     of  digits to appear after the decimal point in floating point out-
	     put, or the minimum number of digits to appear in numeric output.

     fmt     An optional output format specifier which is one of D, O, U, X,  F,
	     or  S.   These  represent	signed decimal output, octal output, un-
	     signed decimal output, hexadecimal output, floating  point  output,
	     and  string output, respectively.	Some output formats do not apply
	     to all fields.  Floating point  output  only  applies  to	timespec
	     fields (the a, m, and c fields).

	     The  special  output  specifier  S may be used to indicate that the
	     output, if applicable, should be in string format.  May be used  in
	     combination with

	     amc     Display date in strftime(3) format.

	     dr      Display actual device name.

	     gu      Display group or user name.

	     p	     Display the mode of file as in ls -lTd.

	     N	     Displays the name of file.

	     T	     Displays the type of file.

	     Y	     Insert  a	`` -> '' into the output.  Note that the default
		     output format for Y is a string, but if  specified  explic-
		     itly, these four characters are prepended.

     sub     An  optional sub field specifier (high, middle, low).  Only applies
	     to the p, d, r, and T output formats.  It can be one of the follow-
	     ing:

	     H	     ``High'' -- specifies the major number for devices  from  r
		     or  d,  the  ``user''  bits for permissions from the string
		     form of p, the file ``type'' bits from the numeric forms of
		     p, and the long output form of T.

	     L	     ``Low'' -- specifies the minor number for devices from r or
		     d, the ``other'' bits for permissions from the string  form
		     of  p, the ``user'', ``group'', and ``other'' bits from the
		     numeric forms of p, and the ls -F	style  output  character
		     for  file	type  when used with T (the use of L for this is
		     optional).

	     M	     ``Middle'' -- specifies the ``group'' bits for  permissions
		     from  the	string	output	form  of  p,  or  the  ``suid'',
		     ``sgid'', and ``sticky'' bits for the numeric forms of p.

     datum   A required field specifier, being one of the following:

	     d	     Device upon which file resides.

	     i	     file's inode number.

	     p	     File type and permissions.

	     l	     Number of hard links to file.

	     u, g    User-id and group-id of file's owner.

	     r	     Device number for character and block device special files.

	     a, m, c
		     The time file was last accessed, modified, or of  when  the
		     inode was last changed.

	     z	     The size of file in bytes.

	     b	     Number of blocks allocated for file.

	     k	     Optimal file system I/O operation block size.

	     f	     User defined flags for file.

	     v	     Inode generation number.

	     The following four field specifiers are not drawn directly from the
	     data in struct stat, but are

	     N	     The name of the file.

	     T	     The  file type, either as in ls -F or in a more descriptive
		     form if the sub field specifier H is given.

	     Y	     The target of a symbolic link.

	     Z	     Expands to ``major,minor'' from the rdev field for  charac-
		     ter  or block special devices and gives size output for all
		     others.

     Only the % and the field specifier are required.  Most field specifiers de-
     fault to U as an output form, with the exception of p which defaults to  O,
     a, m, and c which default to D, and Y, T, and N, which default to S.

EXIT STATUS
     stat exits 0 on success, and >0 if an error occurred.

EXAMPLES
     Given a symbolic link ``foo'' that points from /tmp/foo to /, you would use
     stat as follows:

	   > stat -F /tmp/foo
	   lrwxrwxrwx 1 jschauma cs 1 Apr 24 16:37:28 2002 /tmp/foo@ -> /

	   > stat -LF /tmp/foo
	   lrwxrwxrwx 16 root wheel 512 Apr 19 10:57:54 2002 /tmp/foo/

     To initialize some shell-variables, you could use the -s flag as follows:

	   > csh
	   % eval set `stat -s .cshrc`
	   % echo $st_size $st_mtimespec
	   1148 1015432481

	   > sh
	   $ eval $(stat -s .profile)
	   $ echo $st_size $st_mtimespec
	   1148 1015432481

     In  order	to get a list of the kind of files including files pointed to if
     the file is a symbolic link, you could use the following format:

	   $ stat -f "%N: %HT%SY" /tmp/*
	   /tmp/bar: Symbolic Link -> /tmp/foo
	   /tmp/output25568: Regular File
	   /tmp/blah: Directory
	   /tmp/foo: Symbolic Link -> /

     In order to get a list of the devices, their types and the major and  minor
     device  numbers, formatted with tabs and linebreaks, you could use the fol-
     lowing format:

	   stat -f "Name: %N%n%tType: %HT%n%tMajor: %Hr%n%tMinor: %Lr%n%n" /dev/*
	   [...]
	   Name: /dev/wt8
		   Type: Block Device
		   Major: 3
		   Minor: 8

	   Name: /dev/zero
		   Type: Character Device
		   Major: 2
		   Minor: 12

     In order to determine the permissions set on a file separately,  you  could
     use the following format:

	   > stat -f "%Sp -> owner=%SHp group=%SMp other=%SLp" .
	   drwxr-xr-x -> owner=rwx group=r-x other=r-x

     In  order	to  determine  the  three files that have been modified most re-
     cently, you could use the following format:

	   > stat -f "%m%t%Sm %N" /tmp/* | sort -rn | head -3 | cut -f2-
	   Apr 25 11:47:00 2002 /tmp/blah
	   Apr 25 10:36:34 2002 /tmp/bar
	   Apr 24 16:47:35 2002 /tmp/foo

SEE ALSO
     file(1), ls(1), lstat(2), readlink(2), stat(2), printf(3), strftime(3)

HISTORY
     The stat utility appeared in NetBSD 1.6.

AUTHORS
     The stat utility was written by Andrew Brown <atatat@netbsd.org>.	This man
     page was written by Jan Schaumann <jschauma@netbsd.org>.

FreeBSD 5.0			 April 24, 2002 			 STAT(1)

home | help