home | help
BSDLABEL(8)		     System Manager's Manual		     BSDLABEL(8)

NAME
     bsdlabel -- read and write disk pack label

SYNOPSIS
     bsdlabel [-A] disk
     bsdlabel -w [-An] [-B [-b boot]] [-m machine] disk [type]
     bsdlabel -e [-An] [-B [-b boot]] [-m machine] disk
     bsdlabel -R [-An] [-B [-b boot]] [-m machine] disk protofile

DESCRIPTION
     The bsdlabel utility installs, examines or modifies the BSD label on a disk
     partition.  In addition, bsdlabel can install bootstrap code.

   Disk Device Name
     When  specifying  the  device,  the  /dev/  path prefix may be omitted; the
     bsdlabel utility will automatically prepend it.

   General Options
     The -A option enables processing of the historical parts of the BSD  label.
     If the option is not given, suitable values are set for these fields.

     The  -n  stops  the  bsdlabel program right before the disk would have been
     modified, and displays the result instead of writing it.

     The -m machine argument instructs bsdlabel to use the layout  suitable  for
     the specified machine.

   Reading the Disk Label
     To examine the label on a disk drive, use bsdlabel without options:

     bsdlabel [-A] [-m machine] disk

     disk  represents  the  disk  in  question,  and  may  be in the form da0 or
     /dev/da0.	It will display the partition layout.

   Writing a Standard Label
     To write a standard label, use the form

     bsdlabel -w [-An] [-m machine] disk [type]

     If the drive type is specified, the entry of that name  in  the  disktab(5)
     file is used; otherwise a default layout is used.

   Editing an Existing Disk Label
     To edit an existing disk label, use the form

     bsdlabel -e [-An] [-m machine] disk

     This  command opens the disk label in the default editor, and when the edi-
     tor exits, the label is validated and if OK written to disk.

   Restoring a Disk Label From a File
     To restore a disk label from a file, use the form

     bsdlabel -R [-An] [-m machine] disk protofile

     bsdlabel is capable of restoring a disk label that was previously saved  in
     a file in ASCII format.  The prototype file used to create the label should
     be  in  the  same	format as that produced when reading or editing a label.
     Comments are delimited by `#' and newline.

   Installing Bootstraps
     If the -B argument is specified, bootstrap code will be read from the  file
     /boot/boot  and written to the disk.  The -b boot argument allows a differ-
     ent file to be used.

FILES
     /boot/boot    Default boot image.
     /etc/disktab  Disk description file.

SAVED FILE FORMAT
     The bsdlabel utility uses an ASCII version of  the  label	when  examining,
     editing, or restoring a disk label.  The format is:

	 8 partitions:
	 #	  size	 offset    fstype   [fsize bsize bps/cpg]
	   a:	 81920	      0    4.2BSD     1024  8192    16
	   b:	160000	  81920      swap
	   c:  1173930	      0    unused	 0     0	 # "raw" part, don't edit

     If the -A option is specified, the format is:

	 # /dev/da1c:
	 type: SCSI
	 disk: da0s1
	 label:
	 flags:
	 bytes/sector: 512
	 sectors/track: 51
	 tracks/cylinder: 19
	 sectors/cylinder: 969
	 cylinders: 1211
	 sectors/unit: 1173930
	 rpm: 3600
	 interleave: 1
	 trackskew: 0
	 cylinderskew: 0
	 headswitch: 0		 # milliseconds
	 track-to-track seek: 0  # milliseconds
	 drivedata: 0

	 8 partitions:
	 #	  size	 offset    fstype   [fsize bsize bps/cpg]
	   a:	 81920	      0    4.2BSD     1024  8192    16
	   b:	160000	  81920      swap
	   c:  1173930	      0    unused	 0     0	 # "raw" part, don't edit

     Lines starting with a `#' mark are comments.

     The  partition  table  can have up to 8 entries.  It contains the following
     information:

     #	     The partition identifier is a single letter in  the  range  `a'  to
	     `h'.   By convention, partition `c' is reserved to describe the en-
	     tire disk.

     size    The size of the partition in  sectors,  K	(kilobytes  -  1024),  M
	     (megabytes  -  1024*1024),  G (gigabytes - 1024*1024*1024), % (per-
	     centage of free space  after  removing  any  fixed-size  partitions
	     other  than  partition  `c'),  or * (all remaining free space after
	     fixed-size and percentage partitions).  For partition `c',  a  size
	     of  * indicates the entire disk.  Lowercase versions of K, M, and G
	     are allowed.  Size and type should be specifed without  any  spaces
	     between them.

	     Example: 2097152, 1G, 1024M and 1048576K are all the same size (as-
	     suming 512-byte sectors).

     offset  The  offset of the start of the partition from the beginning of the
	     drive in sectors, or * to have bsdlabel calculate the correct  off-
	     set  to  use  (the end of the previous partition plus one, ignoring
	     partition `c'.  For partition `c', * will be interpreted as an off-
	     set of 0.

     fstype  Describes the purpose of the partition.  The example shows all cur-
	     rently used partition types.  For UFS file systems and ccd(4)  par-
	     titions, use type 4.2BSD.	For Vinum drives, use type vinum.  Other
	     common  types  are  swap  and unused.  By convention, partition `c'
	     represents the entire slice and should be of  type  unused,  though
	     bsdlabel  does  not  enforce this convention.  The bsdlabel utility
	     also knows about a number of other partition types, none  of  which
	     are  in  current use.  (See the definitions starting with FS_UNUSED
	     in <sys/disklabel.h> for more details.)

     fsize   For 4.2BSD and LFS file systems only, the fragment size.	Defaults
	     to 1024 for partitions smaller than 1GB, 4096 for partitions 1GB or
	     larger.

     bsize   For  4.2BSD and LFS file systems only, the block size.  Defaults to
	     8192 for partitions smaller than 1GB, 16384 for partitions  1GB  or
	     larger.

     bps/cpg
	     For  4.2BSD  file	systems,  the  number of cylinders in a cylinder
	     group.  For LFS file systems, the segment shift value.  Defaults to
	     16 for partitions smaller	than  1GB,  64	for  partitions  1GB  or
	     larger.

EXAMPLES
	   bsdlabel da0s1

     Display  the  label  for  the  first slice of the da0 disk, as obtained via
     /dev/da0s1.

	   bsdlabel da0s1 > savedlabel

     Save the in-core label for da0s1 into the file savedlabel.  This  file  can
     be used with the -R option to restore the label at a later date.

	   bsdlabel -w /dev/da0s1

     Create a label for da0s1.

	   bsdlabel -e da0s1

     Read the label for da0s1, edit it, and install the result.

	   bsdlabel -e -n da0s1

     Read  the	on-disk label for da0s1, edit it, and display what the new label
     would be (in sectors).  It does not install the new label either in-core or
     on-disk.

	   bsdlabel -w da0s1

     Write a default label on da0s1.  Use another bsdlabel -e  command	to  edit
     the partitioning and file system information.

	   bsdlabel -R da0s1 savedlabel

     Restore  the  on-disk  and  in-core  label  for  da0s1  from information in
     savedlabel.

	   bsdlabel -R -n da0s1 label_layout

     Display what the label would be for da0s1 using  the  partition  layout  in
     label_layout.   This  is useful for determining how much space would be al-
     loted for various partitions with a labelling scheme  using  %-based  or  *
     partition sizes.

	   bsdlabel -B da0s1

     Install a new bootstrap on da0s1.	The boot code comes from /boot/boot.

	   bsdlabel -w -B -b newboot /dev/da0s1

     Install  a new label and bootstrap.  The bootstrap code comes from the file
     newboot in the current working directory.

	   dd if=/dev/zero of=/dev/da0 bs=512 count=32
	   fdisk -BI da0
	   dd if=/dev/zero of=/dev/da0s1 bs=512 count=32
	   bsdlabel -w -B da0s1
	   bsdlabel -e da0s1

     Completely wipe any prior information on the disk, creating a new	bootable
     disk  with  a  DOS partition table containing one slice, covering the whole
     disk.  Initialize the label on this slice, then edit it.	The  dd(1)  com-
     mands are optional, but may be necessary for some BIOSes to properly recog-
     nize the disk.

     This  is  an  example  disk  label that uses some of the new partition size
     types such as %, M, G, and *, which could be used	as  a  source  file  for
     "bsdlabel -R ad0s1c new_label_file":

	 # /dev/ad0s1c:

	 8 partitions:
	 #	  size	 offset    fstype   [fsize bsize bps/cpg]
	   a:	400M	    0	 4.2BSD     4096 16384	  75	 # (Cyl.    0 - 812*)
	   b:	  1G	    *	   swap
	   c:	   *	    *	 unused
	   e: 204800	    *	 4.2BSD
	   f:	  5g	    *	 4.2BSD
	   g:	   *	    *	 4.2BSD

SEE ALSO
     ccd(4), geom(4), md(4), disktab(5), boot0cfg(8), fdisk(8)

DIAGNOSTICS
     The kernel device drivers will not allow the size of a disk partition to be
     decreased or the offset of a partition to be changed while it is open.

FreeBSD 5.2.1			 March 15, 2003 		     BSDLABEL(8)

home | help