home | help
RFCOMM_SPPD(1)		     General Commands Manual		  RFCOMM_SPPD(1)

NAME
     rfcomm_sppd -- RFCOMM Serial Port Profile daemon

SYNOPSIS
     rfcomm_sppd [-bh] -a BD_ADDR -c channel -t tty

DESCRIPTION
     The  rfcomm_sppd  utility is a Serial Port Profile daemon.  It opens RFCOMM
     connection to the specified server's BD_ADDR and channel.	Once  connection
     is established, the rfcomm_sppd utility provides access to the server's re-
     mote serial port via pty(4) interface.

     The rfcomm_sppd utility opens both master and slave pseudo terminals.  This
     is  done  to  ensure that RFCOMM connection stays open until rfcomm_sppd is
     terminated.  The data received from the master  pseudo  terminal  are  sent
     over  the	RFCOMM connection.  The data received from the RFCOMM connection
     are written into master pseudo terminal.  The application in its turn opens
     the slave pseudo terminal and operates on it just	like  it  would  operate
     over the standard serial port.

     The options are as follows:

     -a BD_ADDR
	     This  required  option  specifies	the remote BD_ADDR of the RFCOMM
	     server.

     -b      Detach from the controlling terminal, i.e., run in background.

     -c channel
	     This option specifies RFCOMM channel to connect  to.   The  channel
	     must  provide  Serial  Port  service.  If channel was not specified
	     then rfcomm_sppd utility will try to obtain RFCOMM channel via Ser-
	     vice Discovery Protocol from the server.

     -h      Display usage message and exit.

     -t tty  Slave pseudo tty name.

EXAMPLES
	   rfcomm_sppd -a 00:01:02:03:04:05 -c 1 -t /dev/ttyp1

     Will start the rfcomm_sppd utility and open RFCOMM connection to the server
     at 00:01:02:03:04:05 and channel 1.  Once the connection  has  been  estab-
     lished,  /dev/ttyp1  can  be  used to talk to the remote serial port on the
     server.

FILES
     /dev/pty[p-sP-S][0-9a-v]  master pseudo terminals
     /dev/tty[p-sP-S][0-9a-v]  slave pseudo terminals

DIAGNOSTICS
     The rfcomm_sppd utility exits 0 on success, and >0 if an error occurs.

BUGS
     Please report if found.

SEE ALSO
     ng_btsocket(4), pty(4), rfcomm_pppd(8)

AUTHORS
     Maksim Yevmenkin <m_evmenkin@yahoo.com>

FreeBSD 5.2.1			 April 26, 2003 		  RFCOMM_SPPD(1)

home | help