home | help
AAC(4)			     Kernel Interfaces Manual			  AAC(4)

NAME
     aac -- Adaptec AdvancedRAID Controller driver

SYNOPSIS
     options AAC_DEBUG=N
     device pci
     device aac
     device aacp

DESCRIPTION
     The  aac driver provides support for the Adaptec AAC family of SCSI Ultra2,
     Ultra160, and Ultra320 RAID controllers.  Supported controllers include:

     *	 AAC-364

     *	 Adaptec SCSI RAID 2120S

     *	 Adaptec SCSI RAID 2200S

     *	 Adaptec SCSI RAID 2410SA

     *	 Adaptec SCSI RAID 5400S

     *	 HP NetRAID 4M

     *	 Dell PERC 2/Si

     *	 Dell PERC 2/QC

     *	 Dell PERC 3/Si

     *	 Dell PERC 3/Di

     Access to RAID containers is available via  the  /dev/aacd?  device  nodes.
     Individual drives cannot be accessed unless they are part of a container or
     volume set, and non-fixed disks cannot be accessed.  Containers can be con-
     figured  by  using  either the on-board BIOS utility of the card, or a com-
     mand-line interface management application.

     The /dev/aac? device nodes provide access to the  management  interface  of
     the controller.  One node exists per installed card.  The aliases /dev/afa?
     and  /dev/hpn? exist for the Dell and HP flavors, respectively, and are re-
     quired for the CLI management utility available from these vendors to work.
     If the kernel is compiled with the COMPAT_LINUX option, or the aac_linux.ko
     and linux.ko modules are loaded, the  Linux-compatible  ioctl(2)  interface
     for  the  management device will be enabled and will allow Linux-based man-
     agement applications to control the card.

     The aacp device enables the SCSI pass-thru  interface  and  allows  devices
     connected	to  the  card such as cdroms to be available via the CAM scsi(4)
     subsystem.  Note that not all cards allow this interface to be enabled.

   Tuning
     The read-only sysctl hw.aac.iosize_max defaults to 65536 and may be set  at
     boot  time to another value via loader(8).  This value determines the maxi-
     mum data transfer size allowed to/from an array.  Setting	it  higher  will
     result  in  better performance, especially for large sequential access pat-
     terns.  Beware: internal limitations of the card limit this  value  to  64K
     for  arrays  with	many members.  While it may be safe to raise this value,
     this is done at the operator's own risk.  Note also that performance  peaks
     at a value of 96K, and drops off dramatically at 128K, due to other limita-
     tions of the card.

FILES
     /dev/aac?		  aac management interface
     /dev/aacd? 	  disk/container interface
     /boot/kernel/aac.ko  aac loadable module

DIAGNOSTICS
     Compiling	with  AAC_DEBUG  set to a number between 0 and 3 will enable in-
     creasingly verbose debug messages.

     The adapter can send status and alert messages asynchronously to  the  dri-
     ver.  These messages are printed on the system console, and are also queued
     for retrieval by a management application.

SEE ALSO
     kld(4), linux(4), scsi(4), kldload(8), loader(8), sysctl(8)

HISTORY
     The aac driver first appeared in FreeBSD 4.3.

AUTHORS
     Mike Smith <msmith@FreeBSD.org>
     Scott Long <scottl@FreeBSD.org>

BUGS
     This  driver  is not compatible with Dell controllers that have version 1.x
     firmware.	The firmware version is the same as the kernel	version  printed
     in the BIOS POST and driver attach messages.

     The controller is not actually paused on suspend/resume.

FreeBSD 5.2.1			February 22, 2001			  AAC(4)

home | help