home | help
PS(1)			     General Commands Manual			   PS(1)

NAME
     ps -- process status

SYNOPSIS
     ps [-aCcefHhjlmrSTuvwxZ] [-M core] [-N system] [-O fmt] [-o fmt] [-p pid]
	[-t tty] [-U username[,username...]]
     ps [-L]

DESCRIPTION
     The ps utility displays a header line followed by lines containing informa-
     tion  about  your processes that have controlling terminals.  This informa-
     tion is sorted by controlling terminal, then by process ID.

     The information displayed is selected based on a set of keywords  (see  the
     -L  -O  and  -o  options).   The  default	output format includes, for each
     process, the process' ID, controlling terminal, cpu  time	(including  both
     user and system time), state, and associated command.

     The  process  file system (see procfs(5)) should be mounted when ps is exe-
     cuted, otherwise not all information will be available.

     The options are as follows:

     -a      Display information about other users' processes as  well	as  your
	     own.      This	can	be     disabled     by	  setting    the
	     security.bsd.see_other_uids sysctl to zero.

     -c      Change the ``command'' column output to just contain the executable
	     name, rather than the full command line.

     -C      Change the way the cpu percentage is calculated by using a  ``raw''
	     cpu  calculation  that ignores ``resident'' time (this normally has
	     no effect).

     -e      Display the environment as well.

     -f      Show commandline and  environment	information  about  swapped  out
	     processes.   This	option is honored only if the uid of the user is
	     0.

     -H      Show all  of  the	kernel	visible  threads  associated  with  each
	     process.	Depending  on the threading package that is in use, this
	     may show only the process, only the kernel scheduled  entities,  or
	     all of the process threads.

     -h      Repeat  the  information  header as often as necessary to guarantee
	     one header per page of information.

     -j      Print information associated with	the  following	keywords:  user,
	     pid, ppid, pgid, jobc, state, tt, time and command.

     -L      List the set of available keywords.

     -l      Display  information  associated  with the following keywords: uid,
	     pid, ppid, cpu, pri, nice, vsz, rss, mwchan, state,  tt,  time  and
	     command.

     -M      Extract  values  associated  with	the name list from the specified
	     core instead of the default /dev/kmem.

     -m      Sort by memory usage, instead of by process ID.

     -N      Extract the name list from the specified system instead of the  de-
	     fault /boot/kernel/kernel.

     -O      Add  the  information  associated with the space or comma separated
	     list of keywords specified, after the process ID,	in  the  default
	     information  display.   Keywords  may  be	appended  with an equals
	     (``='') sign and a string.  This causes the printed header  to  use
	     the specified string instead of the standard header.

     -o      Display  information  associated  with the space or comma separated
	     list of keywords specified.  Multiple keywords may also be given in
	     the form of more than one -o option.  Keywords may be appended with
	     an equals (``='') sign and  a  string.   This  causes  the  printed
	     header to use the specified string instead of the standard header.

     -p      Display information associated with the specified process ID.

     -r      Sort by current cpu usage, instead of by process ID.

     -S      Change the way the process time is calculated by summing all exited
	     children to their parent process.

     -T      Display  information about processes attached to the device associ-
	     ated with the standard input.

     -t      Display information about processes attached to the specified  ter-
	     minal device.

     -U      Display the processes belonging to the specified username(s).

     -u      Display  information  associated with the following keywords: user,
	     pid, %cpu, %mem, vsz, rss, tt, state, start, time and command.  The
	     -u option implies the -r option.

     -v      Display information associated with the  following  keywords:  pid,
	     state,  time,  sl,  re, pagein, vsz, rss, lim, tsiz, %cpu, %mem and
	     command.  The -v option implies the -m option.

     -w      Use 132 columns to display  information,  instead	of  the  default
	     which is your window size.  If the -w option is specified more than
	     once,  ps	will use as many columns as necessary without regard for
	     your window size.

     -x      Display information about processes without controlling terminals.

     -Z      Add label to the list of keywords for which ps will display  infor-
	     mation.

     A	complete list of the available keywords are listed below.  Some of these
     keywords are further specified as follows:

     %cpu      The cpu utilization of the process; this is  a  decaying  average
	       over up to a minute of previous (real) time.  Since the time base
	       over  which  this is computed varies (since processes may be very
	       young) it is possible for the sum of all %CPU  fields  to  exceed
	       100%.

     %mem      The percentage of real memory used by this process.

     flags     The  flags  associated  with  the  process as in the include file
	       <sys/proc.h>:

	       P_ADVLOCK      0x00001	     Process may hold a  POSIX	advisory
					     lock
	       P_CONTROLT     0x00002	     Has a controlling terminal
	       P_INMEM	      0x00004	     Loaded into memory
	       P_NOCLDSTOP    0x00008	     No SIGCHLD when children stop
	       P_PPWAIT       0x00010	     Parent  is  waiting  for  child  to
					     exec/exit
	       P_PROFIL       0x00020	     Has started profiling
	       P_SELECT       0x00040	     Selecting; wakeup/waiting danger
	       P_SINTR	      0x00080	     Sleep is interruptible
	       P_SUGID	      0x00100	     Had set id  privileges  since  last
					     exec
	       P_SYSTEM       0x00200	     System  proc:  no	sigs,  stats  or
					     swapping
	       P_TIMEOUT      0x00400	     Timing out during sleep
	       P_TRACED       0x00800	     Debugged process being traced
	       P_WAITED       0x01000	     Debugging process	has  waited  for
					     child
	       P_WEXIT	      0x02000	     Working on exiting
	       P_EXEC	      0x04000	     Process called exec
	       P_OWEUPC       0x20000	     Owe  process  an  addupc()  call at
					     next ast
	       P_SWAPPING     0x40000	     Process is being swapped

     label     The MAC label of the process.

     lim       The soft limit on memory used, specified  via  a  call  to  setr-
	       limit(2).

     lstart    The  exact  time the command started, using the ``%c'' format de-
	       scribed in strftime(3).

     lockname  The name of the lock that the process is  currently  blocked  on.
	       If the name is invalid or unknown, then "???" is displayed.

     mwchan    The  event  name  if the process is blocked normally, or the lock
	       name if the process is blocked on a  lock.   See  the  wchan  and
	       lockname keywords for details.

     nice      The process scheduling increment (see setpriority(2)).

     rss       the  real memory (resident set) size of the process (in 1024 byte
	       units).

     start     The time the command started.  If the command started  less  than
	       24  hours ago, the start time is displayed using the ``%l:ps.1p''
	       format described in strftime(3).  If  the  command  started  less
	       than   7  days  ago,  the  start  time  is  displayed  using  the
	       ``%a6.15p'' format.  Otherwise, the start time is displayed using
	       the ``%e%b%y'' format.

     state     The state is given by a	sequence  of  characters,  for	example,
	       "RWNA".	 The  first  character	indicates  the	run state of the
	       process:

	       D       Marks a process in disk (or other  short  term,	uninter-
		       ruptible) wait.
	       I       Marks  a  process  that is idle (sleeping for longer than
		       about 20 seconds).
	       J       Marks a process which is in jail(2).  The hostname of the
		       prison can be found in `/proc/<pid>/status'.
	       L       Marks a process that is waiting to acquire a lock.
	       R       Marks a runnable process.
	       S       Marks a process that is sleeping for less than  about  20
		       seconds.
	       T       Marks a stopped process.
	       Z       Marks a dead process (a ``zombie'').

	       Additional  characters  after  these, if any, indicate additional
	       state information:

	       +       The process is in the foreground  process  group  of  its
		       control terminal.
	       <       The process has raised CPU scheduling priority.
	       >       The process has specified a soft limit on memory require-
		       ments  and  is  currently  exceeding  that  limit; such a
		       process is (necessarily) not swapped.
	       A       the  process  has  asked  for  random  page   replacement
		       (MADV_RANDOM,  from  madvise(2),  for  example, lisp in a
		       garbage collect).
	       E       The process is trying to exit.
	       L       The process has pages locked in core  (for  example,  for
		       raw I/O).
	       N       The process has reduced CPU scheduling priority (see set-
		       priority(2)).
	       S       The   process   has   asked  for  FIFO  page  replacement
		       (MADV_SEQUENTIAL, from madvise(2), for example,	a  large
		       image  processing program using virtual memory to sequen-
		       tially address voluminous data).
	       s       The process is a session leader.
	       V       The process is suspended during a vfork(2).
	       W       The process is swapped out.
	       X       The process is being traced or debugged.

     tt        An abbreviation for the pathname of the controlling terminal,  if
	       any.   The  abbreviation  consists of the three letters following
	       /dev/tty, or, for the console, ``con''.	This is  followed  by  a
	       ``-''  if the process can no longer reach that controlling termi-
	       nal (i.e., it has been revoked).

     wchan     The event (an address in the system) on which  a  process  waits.
	       When  printed  numerically,  the  initial  part of the address is
	       trimmed off and the  result  is	printed  in  hex,  for	example,
	       0x80324000 prints as 324000.

     When  printing using the command keyword, a process that has exited and has
     a parent that has not yet waited for the process (in other words, a zombie)
     is listed as ``<defunct>'', and a process which is blocked while trying  to
     exit is listed as ``<exiting>''.  The ps utility makes an educated guess as
     to  the file name and arguments given when the process was created by exam-
     ining memory or the swap area.  The method is inherently  somewhat  unreli-
     able and in any event a process is entitled to destroy this information, so
     the  names  cannot be depended on too much.  The ucomm (accounting) keyword
     can, however, be depended on.

KEYWORDS
     The following is a complete list of the available keywords and their  mean-
     ings.  Several of them have aliases (keywords which are synonyms).

     %cpu	percentage cpu usage (alias pcpu)
     %mem	percentage memory usage (alias pmem)
     acflag	accounting flag (alias acflg)
     args	command and arguments
     comm	command
     command	command and arguments
     cpu	short-term cpu usage factor (for scheduling)
     etime	elapsed running time
     flags	the process flags, in hexadecimal (alias f)
     inblk	total blocks read (alias inblock)
     jobc	job control count
     ktrace	tracing flags
     label	MAC label
     lim	memoryuse limit
     logname	login name of user who started the process
     lstart	time started
     majflt	total page faults
     minflt	total page reclaims
     msgrcv	total messages received (reads from pipes/sockets)
     msgsnd	total messages sent (writes on pipes/sockets)
     lockname	lock currently blocked on (as a symbolic name)
     mwchan	wait channel or lock currently blocked on
     nice	nice value (alias ni)
     nivcsw	total involuntary context switches
     nsigs	total signals taken (alias nsignals)
     nswap	total swaps in/out
     nvcsw	total voluntary context switches
     nwchan	wait channel (as an address)
     oublk	total blocks written (alias oublock)
     paddr	swap address
     pagein	pageins (same as majflt)
     pgid	process group number
     pid	process ID
     poip	pageouts in progress
     ppid	parent process ID
     pri	scheduling priority
     re 	core residency time (in seconds; 127 = infinity)
     rgid	real group ID
     rgroup	group name (from rgid)
     rlink	reverse link on run queue, or 0
     rss	resident set size
     rtprio	realtime priority (101 = not a realtime process)
     ruid	real user ID
     ruser	user name (from ruid)
     sid	session ID
     sig	pending signals (alias pending)
     sigcatch	caught signals (alias caught)
     sigignore	ignored signals (alias ignored)
     sigmask	blocked signals (alias blocked)
     sl 	sleep time (in seconds; 127 = infinity)
     start	time started
     state	symbolic process state (alias stat)
     svgid	saved gid from a setgid executable
     svuid	saved uid from a setuid executable
     tdev	control terminal device number
     time	accumulated cpu time, user + system (alias cputime)
     tpgid	control terminal process group ID
     tsid	control terminal session ID
     tsiz	text size (in Kbytes)
     tt 	control terminal name (two letter abbreviation)
     tty	full name of control terminal
     uprocp	process pointer
     ucomm	name to be used for accounting
     uid	effective user ID
     upr	scheduling priority on return from system call (alias usrpri)
     user	user name (from uid)
     vsz	virtual size in Kbytes (alias vsize)
     wchan	wait channel (as a symbolic name)
     xstat	exit or stop status (valid only for stopped or zombie process)

ENVIRONMENT
     The following environment variables affect the execution of ps:

     COLUMNS  If  set, specifies the user's preferred output width in column po-
	      sitions.	By default, ps attempts to automatically  determine  the
	      terminal width.

FILES
     /dev/kmem		    default kernel memory
     /dev/lomac 	    interface used to query the lomac(4) KLD
     /var/run/dev.db	    /dev name database
     /var/db/kvm_kernel.db  system namelist database
     /boot/kernel/kernel    default system namelist
     /proc		    the mount point of procfs(5)

SEE ALSO
     kill(1),	w(1),	kvm(3),   strftime(3),	lomac(4),  procfs(5),  pstat(8),
     sysctl(8), mutex(9)

HISTORY
     The ps command appeared in Version 4 AT&T UNIX.

BUGS
     Since ps cannot run faster than the system and is run as any  other  sched-
     uled process, the information it displays can never be exact.

FreeBSD 5.2.1			 April 18, 1994 			   PS(1)

home | help