FreeBSD Manual Pages
UART(4) Kernel Interfaces Manual UART(4) NAME uart -- driver for Universal Asynchronous Receiver/Transmitter (UART) devices SYNOPSIS device uart device puc device uart DESCRIPTION The uart device driver provides support for various classes of UARTs implementing the EIA RS-232C (CCITT V.24) serial communications inter- face. Each such interface is controlled by a seperate and independent instance of the uart driver. The primary support for devices that con- tain multiple serial interfaces or that contain other functionality be- sides one or more serial interfaces is provided by the puc(4) device driver. However, the serial interfaces of those devices that are man- aged by the puc(4) driver are controlled by the uart driver. As such, the puc(4) driver provides umbrella functionality for the uart driver and hides the complexities that are inherent when elementary components are packaged together. The uart driver has a modular design to allow it to be used on differ- ing hardware and for various purposes. In the following sections the components are discussed in detail. Options are described in the sec- tion that covers the component to which each option applies. CORE COMPONENT At the heart of the uart driver is the core component. It contains the bus attachments and the low-level interrupt handler. HARDWARE DRIVERS The core component and the kernel interfaces talk to the hardware through the hardware interface. This interface serves as an abstrac- tion of the hardware and allows varying UARTs to be used for serial communications. SYSTEM DEVICES System devices are UARTs that have a special purpose by way of hardware design or software setup. For example, Sun UltraSparc machines use UARTs as their keyboard interface. Such an UART cannot be used for general purpose communications. Likewise, when the kernel is config- ured for a serial console, the corresponding UART will in turn be a system device so that the kernel can output boot messages early on in the boot process. KERNEL INTERFACES The last but not least of the components is the kernel interface. This component ultimately determines how the UART is made visible to the kernel in particular and to users in general. The default kernel in- terface is the TTY interface. This allows the UART to be used for ter- minals, modems and serial line IP applications. System devices, with the notable exception of serial consoles, generally have specialized kernel interfaces. SEE ALSO puc(4) HISTORY The uart device driver first appeared in FreeBSD 5.2. AUTHORS This manual page was written by Marcel Moolenaar <marcel@xcllnt.net>. FreeBSD 5.2.1 August 25, 2003 UART(4)
NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=uart&sektion=4&manpath=FreeBSD+5.2.1-RELEASE>