home | help
AAC(4)			     Kernel Interfaces Manual			  AAC(4)

NAME
     aac -- Adaptec AdvancedRAID Controller driver

SYNOPSIS
     options AAC_DEBUG=N
     device pci
     device aac
     device aacp

DESCRIPTION
     The  aac driver provides support for the Adaptec AAC family of SCSI Ultra2,
     Ultra160, and Ultra320, and SATA RAID controllers.

     Access to RAID containers is available via  the  /dev/aacd?  device  nodes.
     The  aacp	device	enables  the SCSI pass-thru interface and allows devices
     connected to the card such as cdroms to be available via  the  CAM  scsi(4)
     subsystem.  Note that not all cards allow this interface to be enabled.

     The  /dev/aac?  device  nodes provide access to the management interface of
     the controller.  One node exists per installed card.  The aliases /dev/afa?
     and /dev/hpn? exist for compatibilty with the Dell and HP versions of  man-
     agement   tools,	respectively.	If  the  kernel  is  compiled  with  the
     COMPAT_LINUX option, or the aac_linux.ko and linux.ko modules  are  loaded,
     the  Linux-compatible  ioctl(2) interface for the management device will be
     enabled and will allow Linux-based management applications to  control  the
     card.

   Tuning
     The  read-only sysctl hw.aac.iosize_max defaults to 65536 and may be set at
     boot time to another value via loader(8).	This value determines the  maxi-
     mum  data	transfer  size allowed to/from an array.  Setting it higher will
     result in better performance, especially for large sequential  access  pat-
     terns.   Beware:  internal  limitations of the card limit this value to 64K
     for arrays with many members.  While it may be safe to  raise  this  value,
     this  is done at the operator's own risk.	Note also that performance peaks
     at a value of 96K, and drops off dramatically at 128K, due to other limita-
     tions of the card.

HARDWARE
     Controllers supported by the aac driver include:

     *	 Adaptec AAC-364
     *	 Adaptec SCSI RAID 2120S
     *	 Adaptec SCSI RAID 2130S
     *	 Adaptec SCSI RAID 2200S
     *	 Adaptec SCSI RAID 2410SA
     *	 Adaptec SCSI RAID 2810SA
     *	 Adaptec SCSI RAID 5400S
     *	 Dell CERC SATA RAID 2
     *	 Dell PERC 2/Si
     *	 Dell PERC 2/QC
     *	 Dell PERC 3/Si
     *	 Dell PERC 3/Di
     *	 Dell PERC 320/DC
     *	 HP NetRAID 4M

FILES
     /dev/aac?		  aac management interface
     /dev/aacd? 	  disk/container interface
     /boot/kernel/aac.ko  aac loadable module

DIAGNOSTICS
     Compiling with AAC_DEBUG set to a number between 0 and 3  will  enable  in-
     creasingly verbose debug messages.

     The  adapter  can send status and alert messages asynchronously to the dri-
     ver.  These messages are printed on the system console, and are also queued
     for retrieval by a management application.

SEE ALSO
     kld(4), linux(4), scsi(4), kldload(8), loader(8), sysctl(8)

HISTORY
     The aac driver first appeared in FreeBSD 4.3.

AUTHORS
     Mike Smith <msmith@FreeBSD.org>
     Scott Long <scottl@FreeBSD.org>

BUGS
     This driver is not compatible with Dell controllers that have  version  1.x
     firmware.	 The  firmware version is the same as the kernel version printed
     in the BIOS POST and driver attach messages.

     The controller is not actually paused on suspend/resume.

FreeBSD 5.3			 Augyst 12, 2004			  AAC(4)

home | help