Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
CNW(4)			    Kernel Interfaces Manual			CNW(4)

NAME
       cnw -- Netwave AirSurfer	wireless network driver

SYNOPSIS
       device cnw

DESCRIPTION
       The cnw interface provides access to a theoretical 1 Mb/s wireless Eth-
       ernet  network  based  on  the Netwave AirSurfer	Wireless LAN (formerly
       known as	the Xircom Netwave Wireless LAN).

       Note that the driver does not support newer devices such	as the Netwave
       AirSurfer "Plus", or the	BayStack 650/660.  These devices are supported
       by the awi(4) driver.

       Netwave devices are not compatible with IEEE 802.11 wireless  networks.
       Also  note  that	there are Netwave devices with different wireless fre-
       quency, depending on the	radio band plan	in each	country.

       The card	uses 36K of I/O	memory mapped to the card.  You	 may  need  to
       increase	 memory	 space	available  to  the  PC	Card  controller.  See
       pccard(4) for details.

       In use, the cards appear	to achieve up  to  a  420Kb/s  transfer	 rate,
       though a	transfer rate between 250Kb/s and 350Kb/s is typical.

       The  card  operates in the 2.4GHz frequency range and is	subject	to in-
       terference from microwaves, IEEE	802.11 wireless	 network  devices,  as
       well  as	earth.	For example, it	seems that IEEE	802.11 channel 14 con-
       flicts with Netwave (US frequency).  They interfere with	each other  if
       they  are  both	operated  in the same geographic region, causing weird
       packet loss.  You may be	able  to  avoid	 the  interference  with  IEEE
       802.11 devices, by changing the IEEE 802.11 channel.

HARDWARE
       Cards supported by the cnw driver include:

          Xircom CreditCard Netwave
          NetWave AirSurfer

DIAGNOSTICS
       cnw0: can't map memory  Indicates that the driver was not able to allo-
       cate  enough  PC	 Card  bus address space into which to map the device.
       See pccard(4) and increase memory available to the PC Card controller.

SEE ALSO
       arp(4), awi(4), inet(4),	intro(4), pccard(4)

HISTORY
       The  cnw	  driver   was	 ported	  from	 NetBSD	  by   Hiroyuki	  Aizu
       <aizu@jaist.ac.jp>.   It	 first	appeared  in  NetBSD  1.4.   The first
       FreeBSD release to include it was FreeBSD 5.0.  This  manual  page  was
       adopted from NetBSD by Christian	Brueffer <brueffer@FreeBSD.org>.

FreeBSD	5.3		       September 5, 2004			CNW(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=cnw&sektion=4&manpath=FreeBSD+5.3-RELEASE>

home | help