home | help
MOUNTD(8)		     System Manager's Manual		       MOUNTD(8)

NAME
     mountd -- service remote NFS mount requests

SYNOPSIS
     mountd [-2dlnr] [-p port] [exportsfile]

DESCRIPTION
     The  mountd  utility is the server for NFS mount requests from other client
     machines.	It listens for service requests at the port indicated in the NFS
     server specification;  see  Network  File	System	Protocol  Specification,
     RFC1094,  Appendix A and NFS: Network File System Version 3 Protocol Speci-
     fication, Appendix I.

     The following options are available:

     -2      Allow the administrator to force clients to use only the version  2
	     NFS protocol to mount file systems from this server.

     -d      Output debugging information.

     -l      Cause all succeeded mountd requests to be logged.

     -n      Allow  non-root  mount  requests to be served.  This should only be
	     specified if there are clients such as PC's, that require	it.   It
	     will  automatically  clear  the vfs.nfsrv.nfs_privport sysctl flag,
	     which controls if the kernel will accept NFS requests from reserved
	     ports only.

     -p port
	     Force mountd to bind to the specified port, for  both  AF_INET  and
	     AF_INET6  address	families.  This is typically done to ensure that
	     the port which mountd binds to is a known	quantity  which  can  be
	     used  in firewall rulesets.  If mountd cannot bind to this port, an
	     appropriate error will be recorded in the system log, and the  dae-
	     mon will then exit.

     -r      Allow mount RPCs requests for regular files to be served.	Although
	     this  seems to violate the mount protocol specification, some disk-
	     less workstations do mount requests for their swapfiles and  expect
	     them to be regular files.	Since a regular file cannot be specified
	     in  /etc/exports, the entire file system in which the swapfiles re-
	     sides will have to be exported with the -alldirs flag.

     exportsfile
	     Specify an alternate location for the exports file.

     When mountd is started, it loads the export host addresses and options into
     the kernel using the mount(2) system  call.   After  changing  the  exports
     file,  a hangup signal should be sent to the mountd daemon to get it to re-
     load the export information.  After sending the SIGHUP (kill  -s  HUP  `cat
     /var/run/mountd.pid`),  check the syslog output to see if mountd logged any
     parsing errors in the exports file.

     If mountd detects that the running kernel does not include NFS support,  it
     will  attempt  to	load a loadable kernel module containing NFS code, using
     kldload(2).  If this fails, or no NFS KLD was available, mountd exits  with
     an error.

FILES
     /etc/exports	  the list of exported file systems
     /var/run/mountd.pid  the pid of the currently running mountd
     /var/db/mountdtab	  the current list of remote mounted file systems

SEE ALSO
     nfsstat(1), kldload(2), exports(5), nfsd(8), rpcbind(8), showmount(8)

HISTORY
     The mountd utility first appeared in 4.4BSD.

FreeBSD 5.3			 April 28, 1995 		       MOUNTD(8)

home | help