home | help
PS(1)			     General Commands Manual			   PS(1)

NAME
     ps -- process status

SYNOPSIS
     ps [-aCcefHhjlmrSTuvwXxZ] [-G gid[,gid...]] [-M core] [-N system] [-O fmt]
	[-o fmt] [-p pid[,pid...]] [-t tty[,tty...]] [-U username[,username...]]
     ps [-L]

DESCRIPTION
     The  ps utility displays a header line, followed by lines containing infor-
     mation about all of your processes that have controlling terminals.

     A different set of processes can be selected for display by using any  com-
     bination  of  the	-a, -G, -p, -T, -t, and -U options.  If more than one of
     these options are given, then  ps	will  select  all  processes  which  are
     matched by at least one of the given options.

     For  the  processes  which  have been selected for display, ps will usually
     display one line per process.  The -H option may result in multiple  output
     lines  (one  line	per thread) for some processes.  By default all of these
     output lines are sorted first by controlling terminal, then by process  ID.
     The  -m,  -r,  -u, and -v options will change the sort order.  If more than
     one sorting option was given, then the selected processes will be sorted by
     the last sorting option which was specified.

     For the processes which have been selected for display, the information  to
     display  is selected based on a set of keywords (see the -L, -O, and -o op-
     tions).  The default output format includes, for each process, the process'
     ID, controlling terminal, CPU time (including both user and  system  time),
     state, and associated command.

     The  process  file system (see procfs(5)) should be mounted when ps is exe-
     cuted, otherwise not all information will be available.

     The options are as follows:

     -a      Display information about other users' processes as  well	as  your
	     own.   This will skip any processes which do not have a controlling
	     teminal, unless the -x option is also specified.  This can be  dis-
	     abled by setting the security.bsd.see_other_uids sysctl to zero.

     -c      Change  the  "command" column output to just contain the executable
	     name, rather than the full command line.

     -C      Change the way the CPU percentage is calculated by  using	a  "raw"
	     CPU  calculation that ignores "resident" time (this normally has no
	     effect).

     -e      Display the environment as well.

     -f      Show commandline and  environment	information  about  swapped  out
	     processes.   This	option is honored only if the UID of the user is
	     0.

     -G      Display information about processes  which  are  running  with  the
	     specified real group IDs.

     -H      Show  all	of  the  kernel  visible  threads  associated  with each
	     process.  Depending on the threading package that is in  use,  this
	     may  show	only the process, only the kernel scheduled entities, or
	     all of the process threads.

     -h      Repeat the information header as often as	necessary  to  guarantee
	     one header per page of information.

     -j      Print  information  associated  with  the following keywords: user,
	     pid, ppid, pgid, sid, jobc, state, tt, time, and command.

     -L      List the set of keywords available for the -O and -o options.

     -l      Display information associated with the  following  keywords:  uid,
	     pid,  ppid,  cpu, pri, nice, vsz, rss, mwchan, state, tt, time, and
	     command.

     -M      Extract values associated with the name  list  from  the  specified
	     core instead of the currently running system.

     -m      Sort  by  memory  usage,  instead of the combination of controlling
	     terminal and process ID.

     -N      Extract the name list from the specified system instead of the  de-
	     fault, which is the kernel image the system has booted from.

     -O      Add  the  information  associated with the space or comma separated
	     list of keywords specified, after the process ID,	in  the  default
	     information display.  Keywords may be appended with an equals (`=')
	     sign and a string.  This causes the printed header to use the spec-
	     ified string instead of the standard header.

     -o      Display  information  associated  with the space or comma separated
	     list of keywords specified.  Multiple keywords may also be given in
	     the form of more than one -o option.  Keywords may be appended with
	     an equals (`=') sign and a string.  This causes the printed  header
	     to use the specified string instead of the standard header.

     -p      Display  information  about  processes  which  match  the specified
	     process IDs.

     -r      Sort by current CPU usage, instead of the combination  of	control-
	     ling terminal and process ID.

     -S      Change the way the process time is calculated by summing all exited
	     children to their parent process.

     -T      Display  information about processes attached to the device associ-
	     ated with the standard input.

     -t      Display information about processes attached to the specified  ter-
	     minal devices.

     -U      Display the processes belonging to the specified usernames.

     -u      Display  information  associated with the following keywords: user,
	     pid, %cpu, %mem, vsz, rss, tt, state,  start,  time,  and	command.
	     The -u option implies the -r option.

     -v      Display  information  associated  with the following keywords: pid,
	     state, time, sl, re, pagein, vsz, rss, lim, tsiz, %cpu,  %mem,  and
	     command.  The -v option implies the -m option.

     -w      Use  132  columns	to  display  information, instead of the default
	     which is your window size.  If the -w option is specified more than
	     once, ps will use as many columns as necessary without  regard  for
	     your window size.

     -X      When  displaying  processes  matched  by  other  options,	skip any
	     processes which do not have a controlling terminal.

     -x      When  displaying  processes  matched  by  other  options,	 include
	     processes	which  do  not have a controlling terminal.  This is the
	     opposite of the -X option.  If both -X and -x are specified in  the
	     same command, then ps will use the one which was specified last.

     -Z      Add  label to the list of keywords for which ps will display infor-
	     mation.

     A complete list of the available keywords are listed below.  Some of  these
     keywords are further specified as follows:

     %cpu      The  CPU  utilization  of the process; this is a decaying average
	       over up to a minute of previous (real) time.  Since the time base
	       over which this is computed varies (since processes may	be  very
	       young)  it  is  possible for the sum of all %cpu fields to exceed
	       100%.

     %mem      The percentage of real memory used by this process.

     flags     The flags associated with the process  as  in  the  include  file
	       <sys/proc.h>:

	       P_ADVLOCK	   0x00001	Process  may  hold a POSIX advi-
						sory lock
	       P_CONTROLT	   0x00002	Has a controlling terminal
	       P_KTHREAD	   0x00004	Kernel thread
	       P_NOLOAD 	   0x00008	Ignore during load avg	calcula-
						tions
	       P_PPWAIT 	   0x00010	Parent	is  waiting for child to
						exec/exit
	       P_PROFIL 	   0x00020	Has started profiling
	       P_STOPPROF	   0x00040	Has thread in requesting to stop
						prof
	       P_SUGID		   0x00100	Had set id privileges since last
						exec
	       P_SYSTEM 	   0x00200	System proc: no sigs,  stats  or
						swapping
	       P_SINGLE_EXIT	   0x00400	Threads  suspending should exit,
						not wait
	       P_TRACED 	   0x00800	Debugged process being traced
	       P_WAITED 	   0x01000	Someone is waiting for us
	       P_WEXIT		   0x02000	Working on exiting
	       P_EXEC		   0x04000	Process called exec
	       P_SA		   0x08000	Using scheduler activations
	       P_CONTINUED	   0x10000	Proc  has   continued	from   a
						stopped state
	       P_STOPPED_SIG	   0x20000	Stopped due to SIGSTOP/SIGTSTP
	       P_STOPPED_TRACE	   0x40000	Stopped because of tracing
	       P_STOPPED_SINGLE    0x80000	Only one thread can continue
	       P_PROTECTED	   0x100000	Do not kill on memory overcommit
	       P_SIGEVENT	   0x200000	Process pending signals changed
	       P_JAILED 	   0x1000000	Process is in jail
	       P_INEXEC 	   0x4000000	Process is in execve()

     label     The MAC label of the process.

     lim       The  soft  limit  on  memory  used, specified via a call to setr-
	       limit(2).

     lstart    The exact time the command started, using  the  `%c'  format  de-
	       scribed in strftime(3).

     lockname  The  name  of  the lock that the process is currently blocked on.
	       If the name is invalid or unknown, then "???" is displayed.

     mwchan    The event name if the process is blocked normally,  or  the  lock
	       name  if  the  process  is  blocked on a lock.  See the wchan and
	       lockname keywords for details.

     nice      The process scheduling increment (see setpriority(2)).

     rss       the real memory (resident set) size of the process (in 1024  byte
	       units).

     start     The  time  the command started.	If the command started less than
	       24 hours ago, the start time is displayed  using  the  "%l:ps.1p"
	       format  described  in  strftime(3).   If the command started less
	       than 7 days ago, the start time is displayed using the  "%a6.15p"
	       format.	 Otherwise,  the  start  time  is  displayed  using  the
	       "%e%b%y" format.

     state     The state is given by a	sequence  of  characters,  for	example,
	       "RWNA".	 The  first  character	indicates  the	run state of the
	       process:

	       D       Marks a process in disk (or other  short  term,	uninter-
		       ruptible) wait.
	       I       Marks  a  process  that is idle (sleeping for longer than
		       about 20 seconds).
	       L       Marks a process that is waiting to acquire a lock.
	       R       Marks a runnable process.
	       S       Marks a process that is sleeping for less than  about  20
		       seconds.
	       T       Marks a stopped process.
	       W       Marks an idle interrupt thread.
	       Z       Marks a dead process (a "zombie").

	       Additional  characters  after  these, if any, indicate additional
	       state information:

	       +       The process is in the foreground  process  group  of  its
		       control terminal.
	       <       The process has raised CPU scheduling priority.
	       E       The process is trying to exit.
	       J       Marks a process which is in jail(2).  The hostname of the
		       prison can be found in /proc/<pid>/status.
	       L       The  process  has  pages locked in core (for example, for
		       raw I/O).
	       N       The process has reduced CPU scheduling priority (see set-
		       priority(2)).
	       s       The process is a session leader.
	       V       The process is suspended during a vfork(2).
	       W       The process is swapped out.
	       X       The process is being traced or debugged.

     tt        An abbreviation for the pathname of the controlling terminal,  if
	       any.   The  abbreviation  consists of the three letters following
	       /dev/tty, or, for the console, "con".  This is followed by a  `-'
	       if  the	process  can  no  longer reach that controlling terminal
	       (i.e., it has been revoked).

     wchan     The event (an address in the system) on which  a  process  waits.
	       When  printed  numerically,  the  initial  part of the address is
	       trimmed off and the  result  is	printed  in  hex,  for	example,
	       0x80324000 prints as 324000.

     When  printing using the command keyword, a process that has exited and has
     a parent that has not yet waited for the process (in other words, a zombie)
     is listed as "<defunct>", and a process which is blocked  while  trying  to
     exit  is  listed  as  "<exiting>".  If the command vector cannot be located
     (usually because it has not been set, as is the case  of  system  processes
     and/or  kernel threads) the command name is printed within square brackets.
     The ps utility makes an educated guess as to the file  name  and  arguments
     given  when  the  process was created by examining memory or the swap area.
     The method is inherently somewhat unreliable and in any event a process  is
     entitled  to  destroy  this information, so the names cannot be depended on
     too much.	The ucomm (accounting) keyword can, however, be depended on.

KEYWORDS
     The following is a complete list of the available keywords and their  mean-
     ings.  Several of them have aliases (keywords which are synonyms).

     %cpu	percentage CPU usage (alias pcpu)
     %mem	percentage memory usage (alias pmem)
     acflag	accounting flag (alias acflg)
     args	command and arguments
     comm	command
     command	command and arguments
     cpu	short-term CPU usage factor (for scheduling)
     etime	elapsed running time
     flags	the process flags, in hexadecimal (alias f)
     inblk	total blocks read (alias inblock)
     jobc	job control count
     ktrace	tracing flags
     label	MAC label
     lim	memoryuse limit
     logname	login name of user who started the process
     lstart	time started
     majflt	total page faults
     minflt	total page reclaims
     msgrcv	total messages received (reads from pipes/sockets)
     msgsnd	total messages sent (writes on pipes/sockets)
     lockname	lock currently blocked on (as a symbolic name)
     mwchan	wait channel or lock currently blocked on
     nice	nice value (alias ni)
     nivcsw	total involuntary context switches
     nsigs	total signals taken (alias nsignals)
     nswap	total swaps in/out
     nvcsw	total voluntary context switches
     nwchan	wait channel (as an address)
     oublk	total blocks written (alias oublock)
     paddr	swap address
     pagein	pageins (same as majflt)
     pgid	process group number
     pid	process ID
     poip	pageouts in progress
     ppid	parent process ID
     pri	scheduling priority
     re 	core residency time (in seconds; 127 = infinity)
     rgid	real group ID
     rgroup	group name (from rgid)
     rlink	reverse link on run queue, or 0
     rss	resident set size
     rtprio	realtime priority (101 = not a realtime process)
     ruid	real user ID
     ruser	user name (from ruid)
     sid	session ID
     sig	pending signals (alias pending)
     sigcatch	caught signals (alias caught)
     sigignore	ignored signals (alias ignored)
     sigmask	blocked signals (alias blocked)
     sl 	sleep time (in seconds; 127 = infinity)
     start	time started
     state	symbolic process state (alias stat)
     svgid	saved gid from a setgid executable
     svuid	saved UID from a setuid executable
     tdev	control terminal device number
     time	accumulated CPU time, user + system (alias cputime)
     tpgid	control terminal process group ID
     tsid	control terminal session ID
     tsiz	text size (in Kbytes)
     tt 	control terminal name (two letter abbreviation)
     tty	full name of control terminal
     uprocp	process pointer
     ucomm	name to be used for accounting
     uid	effective user ID
     upr	scheduling priority on return from system call (alias usrpri)
     user	user name (from UID)
     vsz	virtual size in Kbytes (alias vsize)
     wchan	wait channel (as a symbolic name)
     xstat	exit or stop status (valid only for stopped or zombie process)

ENVIRONMENT
     The following environment variables affect the execution of ps:

     COLUMNS  If  set, specifies the user's preferred output width in column po-
	      sitions.	By default, ps attempts to automatically  determine  the
	      terminal width.

FILES
     /dev/lomac 	  interface used to query the lomac(4) KLD
     /boot/kernel/kernel  default system namelist
     /proc		  the mount point of procfs(5)

SEE ALSO
     kill(1),	pgrep(1),   pkill(1),	w(1),	kvm(3),  strftime(3),  lomac(4),
     procfs(5), pstat(8), sysctl(8), mutex(9)

STANDARDS
     For historical reasons, ps utility under FreeBSD supports a  different  set
     of  options from what is described by IEEE Std 1003.2 ("POSIX.2"), and what
     is supported on non-BSD operating systems.

HISTORY
     The ps command appeared in Version 4 AT&T UNIX.

BUGS
     Since ps cannot run faster than the system and is run as any  other  sched-
     uled process, the information it displays can never be exact.

     The  ps utility does not correctly display argument lists containing multi-
     byte characters.

FreeBSD 5.3			 March 27, 2004 			   PS(1)

home | help