home | help
UMASS(4)		     Kernel Interfaces Manual			UMASS(4)

NAME
     umass -- USB Mass Storage Devices driver

SYNOPSIS
     device umass

DESCRIPTION
     The  umass  driver provides support for Mass Storage devices that attach to
     the USB port.  Supported are:

     IBM 256MB USB Drive(MSYSTEM DiskOnKey2)
     Iomega USB Zip 100 drive
     Iomega USB Zip 250 drive
     Logitec LDR-H443U2 DVD-RAM/-R/+R/-RW/+RW Drive
     Microtech International, Inc. USB-SCSI-HD 50 USB to SCSI cable
     Panasonic ("Matshita FDD CF-VFDU03")
     Panasonic KXL-CB20AN Portable DVD-ROM/CD-R/RW
     Panasonic KXL-CB35AN(DVD-ROM & CD-R/RW)
     Trek Thumbdrive 8MB
     VAIO floppy drive (includes Y-E Data Flashbuster-U)

     The driver also supports some USB adapters for removable media.  Among  the
     supported models are:

     PNY Attache Flash Drive
     SanDisk SDDR-31 (Compact Flash)
     SanDisk SDDR-75 (only Compact Flash port works)
     Sitecom CN-300 MultiFlash (MMC/SD, SmartMedia, CF, MemoryStick)

     Among the supported digital cameras are:

     Asahi Optical (PENTAX) Optio 230 & 330

     usb(4)  and  one  of uhci(4) or ohci(4) must be configured in the kernel as
     well.  Last but not least, support for SCSI drives, da(4).

EXAMPLES
	   device umass
	   device scbus
	   device da
	   device pass

     Add the umass driver to the kernel.

	   camcontrol rescan 0

     Rescan a Zip drive that was added after boot.  The  command  above  assumes
     that the Zip drive is on the first SCSI bus in the system.

	   camcontrol rescan 0:0:0
	   camcontrol rescan 0:0:1
	   camcontrol rescan 0:0:2
	   camcontrol rescan 0:0:3

     Rescan all slots on a multi-slot flash reader, where the slots map to sepa-
     rate  LUNs  on a single SCSI ID.  Typically only the first slot will be en-
     abled at boot time.  Again, this assumes that the flash reader is the first
     SCSI bus in the system.

	   bsdlabel -w da0 zip100
	   newfs da0c
	   mount -t ufs /dev/da0c /mnt

     Write a disklabel to the Zip drive (see vpo(4) for the  disktab(5)  entry),
     creates the file system and mounts the new file system on /mnt.

	   newfs_msdos /dev/da0

     Create  a	new  FAT  type	file  system.	Care  should be taken not to run
     newfs(8) on devices that already contain data, as this will result  in  the
     information being lost.

     Many  consumer  devices such as digital cameras automatically create MS-DOS
     based file systems when storing information  such	as  images  and  videos.
     These  file  systems  can be accessed by specifying the file system type as
     msdos when using mount(8).

SEE ALSO
     ohci(4), uhci(4), usb(4), vpo(4), disktab(5), bsdlabel(8), camcontrol(8)

AUTHORS
     The umass driver was written by  MAEKAWA  Masahide  <bishop@rr.iij4u.or.jp>
     and Nick Hibma <n_hibma@FreeBSD.org>.

     This manual page was written by Nick Hibma <n_hibma@FreeBSD.org>.

FreeBSD 5.3			February 10, 2004			UMASS(4)

home | help