home | help
CDCE(4) 		     Kernel Interfaces Manual			 CDCE(4)

NAME
     cdce -- USB Communication Device Class Ethernet driver

SYNOPSIS
     device uhci
     device ohci
     device usb
     device cdce

DESCRIPTION
     The  cdce driver provides support for USB Host-to-Host (aka USB-to-USB) and
     USB-to-Ethernet bridges based on the USB Communication Device  Class  (CDC)
     and Ethernet subclass, including the following:

     *	 Prolific PL-2501 Host-to-Host Bridge Controller
     *	 Sharp Zaurus PDA
     *	 Terayon TJ-715 DOCSIS Cable Modem

     The USB bridge appears as a regular network interface on both sides, trans-
     porting Ethernet frames.

     For more information on configuring this device, see ifconfig(8).

     USB 1.x bridges support speeds of up to 12Mbps, and USB 2.0 speeds of up to
     480Mbps.

     Packets  are  received and transmitted over separate USB bulk transfer end-
     points.

     The cdce driver does not support different media types or options.

DIAGNOSTICS
     cdce%d: no union descriptor  The driver couldn't  fetch  an  interface  de-
     scriptor from the USB device.  For a manually added USB vendor/product, the
     CDCE_NO_UNION flag can be tried to work around the missing descriptor.

     cdce%d: no data interface
     cdce%d: could not read endpoint descriptor
     cdce%d: unexpected endpoint
     cdce%d:  could  not  find	data  bulk in/out  For a manually added USB ven-
     dor/product, these errors indicate that the bridge is not	compatible  with
     the driver.

     cdce%d: watchdog timeout  A packet was queued for transmission and a trans-
     mit command was issued, however the device failed to acknowledge the trans-
     mission before a timeout expired.

     cdce%d: no memory for rx list -- packet dropped!  Memory allocation through
     MGETHDR or MCLGET failed, the system is running low on mbufs.

     cdce%d: abort/close rx/tx pipe failed
     cdce%d: rx/tx list init failed
     cdce%d: open rx/tx pipe failed
     cdce%d: usb error on rx/tx

SEE ALSO
     arp(4), intro(4), netintro(4), usb(4), ifconfig(8)

     Universal	 Serial   Bus	Class  Definitions  for  Communication	Devices,
     http://www.usb.org/developers/devclass_docs/usbcdc11.pdf.

     Data  sheet  Prolific  PL-2501  Host-to-Host   Bridge/Network   Controller,
     http://tech.prolific.com.tw/visitor/fcabdl.asp?fid=20679530.

HISTORY
     The  cdce	device	driver	first  appeared  in  OpenBSD 3.6, NetBSD 3.0 and
     FreeBSD 5.4.

AUTHORS
     The cdce driver was written by Craig Boston <craig@tobuj.gank.org> based on
     the aue(4) driver written by
     Bill Paul <wpaul@windriver.com> and ported to OpenBSD by
     Daniel Hartmeier <dhartmei@openbsd.org>.

CAVEATS
     Many USB devices notoriously fail to report their class and interfaces cor-
     rectly.  Undetected products might work flawlessly when  their  vendor  and
     product IDs are added to the driver manually.

FreeBSD 5.4			October 22, 2004			 CDCE(4)

home | help