home | help
EM(4)			     Kernel Interfaces Manual			   EM(4)

NAME
     em -- Intel(R) PRO/1000 Gigabit Ethernet adapter driver

SYNOPSIS
     device em

DESCRIPTION
     The  em  driver provides support for PCI Gigabit Ethernet adapters based on
     the Intel 82540, 82541ER,	82541PI,  82542,  82543,  82544,  82545,  82546,
     82546EB,  82546GB and 82547 Ethernet controller chips.  The driver supports
     Transmit/Receive checksum offload and Jumbo Frames only  on  82540,  82543,
     82544  and 82546-based adapters.  For further hardware information, see the
     README included with the driver.

     For questions related to hardware requirements, refer to the  documentation
     supplied  with  your  Intel  PRO/1000  adapter.   All hardware requirements
     listed apply to use with FreeBSD.

     Support for Jumbo Frames is provided via the interface  MTU  setting.   Se-
     lecting  an MTU larger than 1500 bytes with the ifconfig(8) utility config-
     ures the adapter to receive and transmit Jumbo  Frames.   The  maximum  MTU
     size for Jumbo Frames is 16114.

     This driver version supports VLANs.  For information on enabling VLANs, see
     the README.  The em driver supports the following media types:

     autoselect   Enables auto-negotiation for speed and duplex.

     10baseT/UTP  Sets	10Mbps	operation.   Use  the  mediaopt option to select
		  full-duplex mode.

     100baseTX	  Sets 100Mbps operation.  Use the  mediaopt  option  to  select
		  full-duplex mode.

     1000baseSX   Sets	1000Mbps  operation.  Only full-duplex mode is supported
		  at this speed.

     1000baseTX   Sets 1000Mbps operation.  Only full-duplex mode  is  supported
		  at this speed.

     The em driver supports the following media options:

     full-duplex  Forces full-duplex operation

     half-duplex  Forces half-duplex operation.

     Only  use	mediaopt  to  set the driver to full-duplex.  If mediaopt is not
     specified, the driver defaults to half-duplex.

     For more information on configuring this device, see ifconfig(8).

HARDWARE
     The em driver supports Gigabit Ethernet adapters based on the Intel  82540,
     82541ER,  82541PI,  82542, 82543, 82544, 82545, 82546, 82546EB, 82546GB and
     82547 controller chips:

     *	 Intel PRO/1000 CT Network Connection (82547)
     *	 Intel PRO/1000 F Server Adapter (82543)
     *	 Intel PRO/1000 Gigabit Server Adapter (82542)
     *	 Intel PRO/1000 GT Desktop Adapter (82541PI)
     *	 Intel PRO/1000 MF Dual Port Server Adapter (82546)
     *	 Intel PRO/1000 MF Server Adapter (82545)
     *	 Intel PRO/1000 MF Server Adapter (LX) (82545)
     *	 Intel PRO/1000 MT Desktop Adapter (82540)
     *	 Intel PRO/1000 MT Desktop Adapter (82541)
     *	 Intel PRO/1000 MT Dual Port Server Adapter (82546)
     *	 Intel PRO/1000 MT Quad Port Server Adapter (82546EB)
     *	 Intel PRO/1000 MT Server Adapter (82545)
     *	 Intel PRO/1000 T Desktop Adapter (82544)
     *	 Intel PRO/1000 T Server Adapter (82543)
     *	 Intel PRO/1000 XF Server Adapter (82544)
     *	 Intel PRO/1000 XT Server Adapter (82544)

DIAGNOSTICS
     em%d: Unable to allocate bus resource: memory  A fatal initialization error
     has occurred.

     em%d: Unable to allocate bus resource: interrupt	A  fatal  initialization
     error has occurred.

     em%d:  watchdog  timeout -- resetting  The device has stopped responding to
     the network, or there is a problem with the network connection (cable).

SUPPORT
     For additional information regarding building  and  installation,	see  the
     README  included  with the driver.  For general information and support, go
     to the Intel support website at: http://support.intel.com.

     If an issue is identified with the released source code  on  the  supported
     kernel  with a supported adapter, email the specific information related to
     the issue to <freebsdnic@mailbox.intel.com>.

SEE ALSO
     arp(4), gx(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8)

HISTORY
     The em device driver first appeared in FreeBSD 4.4.

AUTHORS
     The     em     driver     was     written	   by	  Intel      Corporation
     <freebsdnic@mailbox.intel.com>.

BUGS
     Hardware-assisted	VLAN  processing is disabled by default.  You can enable
     it on an em interface  using  ifconfig(8)	unless	you  are  going  to  run
     bridge(4)	on  the interface.  In any case, VLAN can operate safely without
     the hardware acceleration.

FreeBSD 5.4			January 30, 2005			   EM(4)

home | help