home | help
IDA(4)			     Kernel Interfaces Manual			  IDA(4)

NAME
     ida -- Compaq Intelligent Drive Array Controllers

SYNOPSIS
     device scbus
     device ida

DESCRIPTION
     The  Compaq  Intelligent Drive Array (IDA) technology is used to distribute
     data across an array of hard drives.  It unites these hard drives into  one
     or  more high-performance logical drives.	The drive array is managed by an
     array controller.

     These controllers have the ability to provide fault tolerance for the  con-
     nected  drives  and  optionally provide write cache for the logical drives.
     It is also possible for an application to access the SCSI bus subsystem di-
     rectly by using the pass-through interface.

HARDWARE
     The following controllers are supported by the ida driver:

     *	 Compaq SMART Array 221
     *	 Compaq Integrated SMART Array Controller
     *	 Compaq SMART Array 4200
     *	 Compaq SMART Array 4250ES
     *	 Compaq SMART 3200 Controller
     *	 Compaq SMART 3100ES Controller
     *	 Compaq SMART-2/DH Controller
     *	 Compaq SMART-2/SL Controller
     *	 Compaq SMART-2/P Controller
     *	 Compaq SMART-2/E Controller
     *	 Compaq SMART Controller

IMPLEMENTATION NOTES
     Extreme caution should be exercised when using the pass-through  interface.
     It is possible to interfere with normal system I/O and cause hangs if pass-
     through is used to an active device.  Pass-through should only be used to a
     device that is otherwise quiescent.

SEE ALSO
     cam(4), pass(4), xpt(4), camcontrol(8)

AUTHORS
     The  ida  driver  was  written  by  Jonathan Lemon <jlemon@FreeBSD.org> and
     Matthew N. Dodd <mdodd@FreeBSD.org>.  This manual page was written  by  Tom
     Rhodes <trhodes@FreeBSD.org>.

FreeBSD 5.4			 August 8, 2004 			  IDA(4)

home | help