home | help 
MERGEMASTER(8)		     System Manager's Manual		  MERGEMASTER(8)

NAME
     mergemaster -- merge configuration files, et al during an upgrade

SYNOPSIS
     mergemaster [-scrvahipCP] [-m /path/to/sources] [-t /path/to/temp/root]
		 [-d] [-u N] [-w N] [-D /path]

DESCRIPTION
     The  mergemaster  utility is a Bourne shell script which is designed to aid
     you in updating the various configuration and other files	associated  with
     FreeBSD.  It is HIGHLY recommended that you back up your /etc directory be-
     fore beginning this process.

     The script uses /usr/src/etc/Makefile to build a temporary root environment
     from  /  down, populating that environment with the various files.  You can
     specify a different source directory with the [-m] command line option,  or
     specify  the  destination directory with the [-D] option.	It then compares
     each file in that environment  to	its  installed	counterpart.   When  the
     script  finds a change in the new file, or there is no installed version of
     the new file it gives you four options to deal with it.   You  can  install
     the  new  file  as is, delete the new file, merge the old and new files (as
     appropriate) using sdiff(1) or leave the file in the temporary  root  envi-
     ronment to merge by hand later.

     By  default it creates the temporary root in /var/tmp/temproot and compares
     the cvs(1) version $Id/$FreeBSD strings for files that have them,	deleting
     the  temporary file if the strings match.	If there is no $Id string, or if
     the strings are different it compares the files themselves.  You  can  also
     specify that the script ignore the $Id strings and compare every file.

     The merge menu option is designed to let you easily combine your customiza-
     tions  from  the old version of a file into the new one.  While you can use
     the merge function to incorporate changes from files that you have not cus-
     tomized, it is not recommended.

     The mergemaster utility checks your umask and issues a warning for anything
     other than 022.  While it is not mandatory to grant world read  permissions
     for  most	configuration files, you may run into problems without them.  If
     you choose a umask other than 022 and experience trouble later  this  could
     be  the  cause.   /etc/master.passwd  is treated as a special case.  If you
     choose to install this file or a merged version of it the file  permissions
     are  always  600 (rw-------) for security reasons.  After installing an up-
     dated version of this file you should probably run pwd_mkdb(8) with the  -p
     option to rebuild your password databases and recreate /etc/passwd.

     The script uses the owner and group id's that the files are created with by
     /usr/src/etc/Makefile,  and  file	permissions  as  specified by the umask.
     Unified diffs are used by default to display  any	differences  unless  you
     choose context diffs.

     The  mergemaster  utility will source scripts that you specify right before
     it starts the comparison, and after it's done running.  The easiest way  to
     handle  this is to place the path to the script(s) in the appropriate vari-
     ables in your .mergemasterrc file.  The script sourced before comparison is
     named in MM_PRE_COMPARE_SCRIPT, and the one sourced  after  the  script  is
     done is MM_EXIT_SCRIPT.  This is the recommended way to specify local modi-
     fications,  or  files  that you want to give special handling to.	This in-
     cludes files that you want to be deleted without being  compared.	 Because
     the  named scripts are sourced from within mergemaster, all of the script's
     variables are available for use in your custom script.  You  can  also  use
     /etc/mergemaster.rc  which  will  be  read  before .mergemasterrc.  Options
     specified on the command line are updated last, and therefore can	override
     both files.

     The options are as follows:

     -s 	 Perform  a  strict  comparison,  diff'ing  every pair of files.
		 This comparison is performed line by line,  without  regard  to
		 CVS $Id's.

     -c 	 Use context diffs instead of unified diffs.

     -r 	 Re-run  mergemaster on a previously cleaned directory, skipping
		 the creation of the temporary root environment.  This option is
		 compatible with all other options.

     -v 	 Be more verbose about the process.   You  should  probably  use
		 this  option  the  first time you run mergemaster.  This option
		 also gives you a list of files that exist only in the installed
		 version of /etc.

     -a 	 Run automatically.  This option will leave all the  files  that
		 differ  from  the installed versions in the temporary directory
		 to be dealt with by hand.  If the temproot directory exists, it
		 creates a new one in a previously non-existent directory.  This
		 option unsets the verbose flag,  but  is  compatible  with  all
		 other options.  Setting -a makes -w superfluous.

     -h 	 Display usage and help information.

     -i 	 Automatically install any files that do not exist in the desti-
		 nation directory.

     -p 	 Pre-buildworld mode.  Compares only files known to be essential
		 to    the    success	 of    {build|install}world,   including
		 /etc/make.conf.

     -C 	 After a standard mergemaster run, compares your rc.conf[.local]
		 options to the defaults.

     -P 	 Preserve      files	   that       you	replace       in
		 /var/tmp/mergemaster/preserved-files-<date>,  or another direc-
		 tory you specify in your mergemaster rc file.

     -m /path/to/sources
		 Specify the path to the directory where  you  want  to  do  the
		 make(1).   (In  other words, where your sources are, but -s was
		 already taken.)

     -t /path/to/temp/root
		 Create the temporary root environment in /path/to/temp/root in-
		 stead of the default /var/tmp/temproot.

     -d 	 Add the date and time to the name of the temporary root  direc-
		 tory.	 If  -t  is specified, this option must follow it if you
		 want the date added too.

     -u N	 Specify a numeric umask.  The default is 022.

     -w N	 Supply an alternate screen width to  the  sdiff(1)  command  in
		 numbers of columns.  The default is 80.

     -D /path	 Specify the destination directory for the installed files.

ENVIRONMENT
     The mergemaster utility uses the PAGER environment variable if set.  Other-
     wise  it  uses  more(1).	If PAGER specifies a program outside its limited
     PATH without specifying the full path, mergemaster prompts you with options
     on how to proceed.  The MM_PRE_COMPARE_SCRIPT and MM_EXIT_SCRIPT  variables
     are  used	as described above.  Other variables that are used by the script
     internally can be specified in .mergemasterrc as described in  more  detail
     below.

EXAMPLES
     Typically all you will need to do is type mergemaster at the prompt and the
     script will do all the work for you.

     To  use  context diff's and have mergemaster explain more things as it goes
     along, use:

	   # mergemaster -cv

     To  specify  that	mergemaster  put  the  temporary  root	environment   in
     /usr/tmp/root, use:

	   # mergemaster -t /usr/tmp/root

     To specify a 110 column screen with a strict comparison, use:

	   # mergemaster -sw 110

FILES
     /etc/mergemaster.rc
     $HOME/.mergemasterrc

     The mergemaster utility will . (source) these files if they exist.  Command
     line options will override rc file options.  $HOME/.mergemasterrc overrides
     /etc/mergemaster.rc.  Here is an example with all values commented out:

     # These are options for mergemaster, with their default values listed
     # The following options have command line overrides
     #
     # Directory to install the temporary root environment into
     #TEMPROOT='/var/tmp/temproot'
     #
     # Strict comparison bypasses the CVS $Id tests and compares every file
     #STRICT=no
     #
     # Type of diff, such as unified, context, etc.
     #DIFF_FLAG='-u'
     #
     # Additional options for diff.  This will get unset when using -s.
     #DIFF_OPTIONS='-I$FreeBSD:.*[$]'	     # Ignores CVS Id tags
     #
     # Verbose mode includes more details and additional checks
     #VERBOSE=
     #
     # Automatically install files that do not exist on the system already
     #AUTO_INSTALL=
     #
     # Compare /etc/rc.conf[.local] to /etc/defaults/rc.conf
     #COMP_CONFS=yes
     #
     # Preserve files that you replace
     #PRESERVE_FILES=yes
     #PRESERVE_FILES_DIR=/var/tmp/mergemaster/preserved-files-`date +%y%m%d-%H%M%S`
     #
     # Sourcedir is the directory to do the 'make' in (where the new files are)
     #SOURCEDIR='/usr/src/etc'
     #
     # The umask for mergemaster to compare the default file's modes to
     #NEW_UMASK=022
     #
     # Specify the destination directory for the installed files
     #DESTDIR=
     #
     # The following options have no command line overrides
     # For those who just cannot stand including the full path to PAGER
     #DONT_CHECK_PAGER=
     #
     # If you set 'yes' above, make sure to include the PATH to your pager
     #PATH=/bin:/usr/bin:/usr/sbin
     #
     # Don't compare the old and new motd files
     #IGNORE_MOTD=yes
     #
     # Specify the path to scripts to run before the comparison starts,
     # and/or after the script has finished its work
     #MM_PRE_COMPARE_SCRIPT=
     #MM_EXIT_SCRIPT=

SEE ALSO
     cvs(1), diff(1), make(1), more(1), sdiff(1), pwd_mkdb(8)

     /usr/src/etc/Makefile

     Nik     Clayton,	  The	  Cutting     Edge     (using	 make	 world),
     http://www.FreeBSD.org/doc/handbook/makeworld.html.

DIAGNOSTICS
     Exit status is 0 on successful completion, or if the user bails  out  manu-
     ally at some point during execution.

     Exit status is 1 if it fails for one of the following reasons:

     Invalid command line option

     Failure to create the temporary root environment

     Failure to populate the temporary root

HISTORY
     The mergemaster utility was first publicly available on one of my web pages
     in  a much simpler form under the name comproot on 13 March 1998.	The idea
     for creating the temporary root environment comes from Nik  Clayton's  make
     world tutorial which is referenced above.

AUTHORS
     This  manual  page  and  the  script  itself were written by Douglas Barton
     <DougB@FreeBSD.org>.

BUGS
     There are no known bugs.  Please report any problems, comments  or  sugges-
     tions to the author.  Several of the improvements to this program have come
     from user suggestions.  Thank you.

FreeBSD 5.4			February 5, 2001		  MERGEMASTER(8)
home | help