home | help
TWA(4)			     Kernel Interfaces Manual			  TWA(4)

NAME
     twa -- 3ware 9000 series SATA RAID controllers driver

SYNOPSIS
     device twa

DESCRIPTION
     The  twa driver provides support for the AMCC's 3ware 9000 series SATA con-
     trollers.

     These controllers are available in 4, 8 or 12-port configurations, and sup-
     port the following RAID levels: 0, 1, 10, 5, 50.  The device nodes for  the
     controllers  are  of  the form /dev/twaX, where X is the controller number.
     The driver is implemented as a SCSI SIM under CAM, and, as such, the  logi-
     cal  units  that it controls are accessible via the device nodes, /dev/daY,
     where Y is the logical unit number.

HARDWARE
     The twa driver supports the following SATA RAID controllers:

     *	 AMCC's 3ware 9500S-4LP
     *	 AMCC's 3ware 9500S-8
     *	 AMCC's 3ware 9500S-8MI
     *	 AMCC's 3ware 9500S-12
     *	 AMCC's 3ware 9500S-12MI

DIAGNOSTICS
     Whenever the driver encounters a command failure, it prints  out  an  error
     code in the format: "ERROR: (<error source>: <error code>):", followed by a
     text description of the error.  There are other error messages and warnings
     that  the	driver	prints out, depending on the kinds of errors that it en-
     counters.	If the driver is compiled with TWA_DEBUG defined, it prints  out
     a	whole bunch of debug messages, the quantity of which varies depending on
     the value assigned to TWA_DEBUG (0 to 10).

AUTHORS
     The   twa	 driver   and	manpage   were	 written   by	Vinod	 Kashyap
     <vkashyap@FreeBSD.org>.

FreeBSD 5.4			 August 15, 2004			  TWA(4)

home | help