home | help
ISP(4)			     Kernel Interfaces Manual			  ISP(4)

NAME
     isp -- Qlogic based SCSI and FibreChannel SCSI Host Adapters

SYNOPSIS
     device isp

     For one or more SCSI busses:
     device scbus0

DESCRIPTION
     This driver provides access to SCSI or FibreChannel devices.

     SCSI features include support for Ultra SCSI and wide mode transactions for
     SCSI,  Ultra2  LVD  (for  the ISP1080 and ISP1280), and Ultra3 LVD (for the
     ISP12160).

     Fibre Channel support uses FCP SCSI profile for FibreChannel.  and utilizes
     Class 3 and Class 2 connections (Qlogic 2100 is Class 3 only, minor patches
     to the Qlogic 2200 to force Class 2 mode).  Support is available for Public
     and Private loops, and for point-to-point connections (Qlogic  2200  only).
     The newer 2-Gigabit cards (2300, 2312) are also supported.  Command tagging
     is supported for all (in fact, FibreChannel requires tagging).  Fabric sup-
     port is enabled by default (but may be contingent upon the correct firmware
     being loaded).

FIRMWARE
     Firmware is now available if the ispfw(4) module is loaded during bootstrap
     (q.v.).

     It  is  very  strongly recommended that you use the firmware available from
     ispfw(4) as it is the most likely to have been tested with this driver.

HARDWARE
     Cards supported by the isp driver include:

	   ISP1000
		   SBus Fast Wide, Ultra Fast Wide cards, Single Ended	or  Dif-
		   ferential cards.

	   ISP1020
		   Qlogic 1020 Fast Wide and Differential Fast Wide PCI cards.

	   ISP1040
		   Qlogic 1040 Ultra Wide and Differential Ultra Wide PCI cards.
		   Also  known	as  the DEC KZPBA-CA (single ended) and KZPBA-CB
		   (HVD differential).

	   Qlogic 1240
		   Qlogic 1240 Dual Bus Ultra Wide and Differential  Ultra  Wide
		   PCI cards.

	   Qlogic 1020
		   Qlogic 1020 SCSI cards.

	   Qlogic 1040
		   Qlogic 1040 Ultra SCSI cards.

	   Qlogic 1080
		   Qlogic 1280 LVD Ultra2 Wide PCI cards.

	   Qlogic 1280
		   Qlogic 1280 Dual Bus LVD Ultra2 Wide PCI cards.

	   Qlogic 12160
		   Qlogic 12160 Dual Bus LVD Ultra3 Wide PCI cards.

	   Qlogic 210X
		   Qlogic  2100 and 2100A Copper and Optical Fibre Channel Arbi-
		   trated Loop (single, dual).

	   Qlogic 220X
		   Qlogic 2200 Copper and Optical Fibre Channel Arbitrated  Loop
		   PCI cards (single, dual, quad).

	   Qlogic 2300
		   Qlogic 2300 Optical Fibre Channel PCI cards.

	   Qlogic 2312
		   Qlogic 2312 Optical Fibre Channel PCI cards.

	   Qlogic 234X
		   Qlogic  234X  Optical  Fibre Channel PCI cards (2312 chipset,
		   single and dual attach).

	   Qlogic 2322
		   Qlogic 2322 Optical Fibre Channel PCI cards.

	   Qlogic 200
		   Dell Branded version of the QLogic  2312  Fibre  Channel  PCI
		   cards.

CONFIGURATION OPTIONS
     Target mode support may be enabled with the

     options ISP_TARGET_MODE

     option.

BOOT OPTIONS
     The    following	 options   are	 switchable   by   setting   values   in
     /boot/device.hints.

     They are:

     hint.isp.0.disable
	     A hint value to disable driver in kernel.

     hint.iso.0.fwload_disable
	     A hint value to disable loading of firmware ispfw(4).

     hint.isp.0.prefer_memmap
	     A hint value to use PCI Memory space instead of  I/O  space  access
	     for.

     hint.isp.0.prefer_iomap
	     A	hint  value  to use PCI I/O space instead of Memory space access
	     for.

     hint.isp.0.ignore_nvram
	     A hint value to ignore board  NVRAM  settings  for.  Otherwise  use
	     NVRAM settings.

     hint.isp.0.fullduplex
	     A hint value to set full duplex mode.

     hint.isp.0.topology
	     A	hint  value  to  select topology of connection. Supported values
	     are:

	     lport (Prefer loopback and fallback to point to point).

	     nport (Prefer point to point and fallback to loopback).

	     lport-only (Loopback only).

	     nport-only (Point to point only).

     hint.isp.0.portwwn
	     This should be the full 64 bit World Wide Port Name you would  like
	     to use, overriding the value in NVRAM for the card.

     hint.isp.0.nodewwn
	     This  should be the full 64 bit World Wide Node Name you would like
	     to use, overriding the value in NVRAM for the card.

     hint.isp.0.iid
	     A hint to override or set the Initiator  ID  (principally	for  SPI
	     SCSI).

     hint.isp.0.role
	     A	hint to define default role for isp instance (target, initiator,
	     both).

     hint.isp.0.debug
	     A hint value for a driver debug level (values from  0  through  7).
	     Default is 0.

SEE ALSO
     da(4), intro(4), ispfw(4), sa(4), scsi(4)

AUTHORS
     The isp driver was written by Matthew Jacob for NASA/Ames Research Center.

BUGS
     The driver currently ignores some NVRAM settings.

     The driver currently does not do error recovery for timed out commands very
     gracefully.

     Target  mode  support  is not completely debugged yet.  It works reasonably
     well for Fibre Channel, somewhat well for Qlogic 1040 cards, but  does  not
     yet  work	for  the  other cards (due to last minute unannounced changes in
     firmware interfaces).

     Sometimes, when booting, the driver gets stuck waiting for the Fibre  Chan-
     nel  f/w  to tell it that the loop port database is ready, or waiting for a
     good loop to be seen (this does not yet support booting without being  con-
     nected  to  a fibre channel device).  To unwedge the system, unplug and re-
     plug the fibre channel connection, or otherwise cause a LIP (Loop	Initial-
     ization Primitive sequence)- this will kick the f/w into getting unstuck.

     QLogic  2322  support  is	limited  to  platforms where the BIOS can enable
     firmware as there is no code yet  to  do  the  3  stage  loading  for  2322
     firmware.

FreeBSD 5.5			February 6, 2006			  ISP(4)

home | help