SBSH(4) Kernel Interfaces Manual SBSH(4) NAME sbsh -- Granch SBNI16 SHDSL modem device driver SYNOPSIS device sbsh DESCRIPTION The sbsh driver provides support for an internal PCI modem SBNI16-SHDSL. A device is introduced to the OS as a common Ethernet-like network card which must be configured with ifconfig(8) (all standard network interface parame- ters could be set). Modem-specific parameters (master/slave mode, line rate, etc.) must be set with the sb16config utility before interface acti- vation. DIAGNOSTICS sbsh%d: couldn't map memory sbsh%d: couldn't map interrupt sbsh%d: couldn't set up irq A fatal initialization error has occurred. sbsh%d: unable to load firmware A fatal error has occurred while sb16config was running. sbsh%d: firmware wasn't loaded "ifconfig ... up" has failed because device has not been configured with sb16config. sbsh%d: transmit timeout sbsh%d: interrupt posted but not delivered Probably, a hardware error or incompatibility. sbsh%d: unable to get mbuf sbsh%d: unable to get mbuf cluster The driver failed to allocate a memory buffer. SEE ALSO arp(4), netintro(4), ifconfig(8) ports/sysutils/sb16config HISTORY The sbsh device driver first appeared in FreeBSD 4.9. AUTHORS The sbsh driver was written by Denis I. Timofeev <timofeev@granch.ru>. FreeBSD 6.3 April 11, 2003 SBSH(4)
NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=sbsh&sektion=4&manpath=FreeBSD+6.3-RELEASE>