home | help 
STG(4)			     Kernel Interfaces Manual			  STG(4)

NAME
     stg -- driver for Future Domain based SCSI controllers

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device scbus
	   device stg

	   For one or more ISA cards:
	   device isa

	   In /boot/device.hints:
	   hint.stg.0.at="isa"

	   For one or more PCI cards:
	   device pci

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   stg_load="YES"

DESCRIPTION
     The  stg  driver provides support for ISA, PCCARD and PCI controllers based
     on Future Domain SCSI controller chips including the TMC-16C30,  16C50  and
     32C60.

HARDWARE
     Controllers supported by the stg driver include:

     *	 Adaptec 2920/A
     *	 Future Domain SCSI2GO
     *	 Future Domain TMC-18XX/3260
     *	 IBM SCSI PCMCIA Card
     *	 ICM PSC-2401 SCSI
     *	 MELCO IFC-SC
     *	 RATOC REX-5536, REX-5536AM, REX-5536M, REX-9836A

     Note that the Adaptec 2920C is supported by the ahc(4) driver.

SEE ALSO
     ahc(4), cd(4), ch(4), da(4), intro(4), sa(4), scsi(4)

HISTORY
     The  stg  device  driver  has been developed for NetBSD/pc98 and ported for
     FreeBSD.  It  first  appeared  in	FreeBSD  2.2  with  PAO  and  merged  in
     FreeBSD 4.2.

AUTHORS
     The stg driver was written by Naofumi HONDA.

FreeBSD 6.3			 August 8, 2004 			  STG(4)
home | help