Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
TWA(4)			    Kernel Interfaces Manual			TWA(4)

NAME
       twa -- 3ware 9000/9500/9550/9650	series SATA RAID controllers driver

SYNOPSIS
       To  compile  this  driver into the kernel, place	the following lines in
       your kernel configuration file:

	     device scbus
	     device twa

       Alternatively, to load the driver as a module at	boot time,  place  the
       following line in loader.conf(5):

	     twa_load="YES"

DESCRIPTION
       The  twa	 driver	 provides support for AMCC's 3ware 9000/9500/9550/9650
       series SATA controllers.

       These controllers are available in 4, 8,	12 or 16-port  configurations,
       and  support  the  following  RAID levels: 0, 1,	10, 5, 50.  The	device
       nodes for the controllers are of	the form /dev/twaX,  where  X  is  the
       controller  number.  The	driver is implemented as a SCSI	SIM under CAM,
       and, as such, the logical units that it controls	are accessible via the
       device nodes, /dev/daY, where Y is the logical unit number.

HARDWARE
       The twa driver supports the following SATA RAID controllers:

          AMCC's 3ware	9500S-4LP
          AMCC's 3ware	9500S-8
          AMCC's 3ware	9500S-8MI
          AMCC's 3ware	9500S-12
          AMCC's 3ware	9500S-12MI
          AMCC's 3ware	9500SX-4LP
          AMCC's 3ware	9500SX-8LP
          AMCC's 3ware	9500SX-12
          AMCC's 3ware	9500SX-12MI
          AMCC's 3ware	9500SX-16ML
          AMCC's 3ware	9550SX-4LP
          AMCC's 3ware	9550SX-8LP
          AMCC's 3ware	9550SX-12
          AMCC's 3ware	9550SX-12MI
          AMCC's 3ware	9550SX-16ML
          AMCC's 3ware	9650SE-2LP
          AMCC's 3ware	9650SE-4LPML
          AMCC's 3ware	9650SE-8LPML
          AMCC's 3ware	9650SE-12ML
          AMCC's 3ware	9650SE-16ML
          AMCC's 3ware	9650SE-24M8

DIAGNOSTICS
       Whenever	the driver encounters a	command	failure, it prints out an  er-
       ror  code in the	format:	"ERROR:	(<error	source>: <error	code>):", fol-
       lowed by	a text description of the error.  There	are other  error  mes-
       sages  and  warnings that the driver prints out,	depending on the kinds
       of errors that it encounters.  If the driver is compiled	with TWA_DEBUG
       defined,	it prints out a	whole bunch of debug messages, the quantity of
       which varies depending on the value assigned to TWA_DEBUG (0 to 10).

AUTHORS
       The  twa	 driver	 and   manpage	 were	written	  by   Vinod   Kashyap
       <vkashyap@FreeBSD.org>.

FreeBSD	6.3			  May 9, 2007				TWA(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=twa&sektion=4&manpath=FreeBSD+6.3-RELEASE>

home | help