home | help
MOUNTD(8)		     System Manager's Manual		       MOUNTD(8)

NAME
     mountd -- service remote NFS mount requests

SYNOPSIS
     mountd [-2dlnr] [-h bindip] [-p port] [exportsfile]

DESCRIPTION
     The  mountd  utility is the server for NFS mount requests from other client
     machines.	It listens for service requests at the port indicated in the NFS
     server specification;  see  Network  File	System	Protocol  Specification,
     RFC1094,  Appendix A and NFS: Network File System Version 3 Protocol Speci-
     fication, Appendix I.

     The following options are available:

     -2      Allow the administrator to force clients to use only the version  2
	     NFS protocol to mount file systems from this server.

     -d      Output debugging information.  mountd will not detach from the con-
	     trolling terminal and will print debugging messages to stderr.

     -h bindip
	     Specify  specific IP addresses to bind to for TCP and UDP requests.
	     This option may be specified multiple times.  If no  -h  option  is
	     specified, mountd will bind to INADDR_ANY.  Note that when specify-
	     ing  IP  addresses with -h, mountd will automatically add 127.0.0.1
	     and if IPv6 is enabled, ::1 to the list.

     -l      Cause all succeeded mountd requests to be logged.

     -n      Allow non-root mount requests to be served.  This	should	only  be
	     specified	if  there are clients such as PC's, that require it.  It
	     will automatically clear the  vfs.nfsrv.nfs_privport  sysctl  flag,
	     which controls if the kernel will accept NFS requests from reserved
	     ports only.

     -p port
	     Force  mountd  to	bind to the specified port, for both AF_INET and
	     AF_INET6 address families.  This is typically done to  ensure  that
	     the  port	which  mountd  binds to is a known quantity which can be
	     used in firewall rulesets.  If mountd cannot bind to this port,  an
	     appropriate  error will be recorded in the system log, and the dae-
	     mon will then exit.

     -r      Allow mount RPCs requests for regular files to be served.	Although
	     this seems to violate the mount protocol specification, some  disk-
	     less  workstations do mount requests for their swapfiles and expect
	     them to be regular files.	Since a regular file cannot be specified
	     in /etc/exports, the entire file system in which the swapfiles  re-
	     sides will have to be exported with the -alldirs flag.

     exportsfile
	     Specify an alternate location for the exports file.

     When mountd is started, it loads the export host addresses and options into
     the  kernel  using  the  mount(2)	system call.  After changing the exports
     file, a hangup signal should be sent to the mountd daemon to get it to  re-
     load  the	export	information.  After sending the SIGHUP (kill -s HUP `cat
     /var/run/mountd.pid`), check the syslog output to see if mountd logged  any
     parsing errors in the exports file.

     If  mountd detects that the running kernel does not include NFS support, it
     will attempt to load a loadable kernel module containing  NFS  code,  using
     kldload(2).   If this fails, or no NFS KLD was available, mountd exits with
     an error.

FILES
     /etc/exports	  the list of exported file systems
     /var/run/mountd.pid  the pid of the currently running mountd
     /var/db/mountdtab	  the current list of remote mounted file systems

SEE ALSO
     nfsstat(1), kldload(2), exports(5), nfsd(8), rpcbind(8), showmount(8)

HISTORY
     The mountd utility first appeared in 4.4BSD.

FreeBSD 6.4			October 20, 2007		       MOUNTD(8)

home | help