home | help
BSDTAR(1)		     General Commands Manual		       BSDTAR(1)

NAME
     tar -- manipulate tape archives

SYNOPSIS
     tar [bundled-flags <args>] [<file> | <pattern> ...]
     tar {-c} [options] [files | directories]
     tar {-r | -u} -f archive-file [options] [files | directories]
     tar {-t | -x} [options] [patterns]

DESCRIPTION
     tar  creates  and manipulates streaming archive files.  This implementation
     can extract from tar, pax, cpio, zip, jar, ar, and ISO  9660  cdrom  images
     and can create tar, pax, cpio, ar, and shar archives.

     The  first synopsis form shows a "bundled" option word.  This usage is pro-
     vided for compatibility with historical implementations.  See COMPATIBILITY
     below for details.

     The other synopsis forms show the preferred usage.  The first option to tar
     is a mode indicator from the following list:
     -c      Create a new archive containing the specified items.
     -r      Like -c, but new entries are appended to the  archive.   Note  that
	     this  only  works on uncompressed archives stored in regular files.
	     The -f option is required.
     -t      List archive contents to stdout.
     -u      Like -r, but new entries are added only if they have a modification
	     date newer than the corresponding entry in the archive.  Note  that
	     this  only  works on uncompressed archives stored in regular files.
	     The -f option is required.
     -x      Extract to disk from the archive.	If a file with the same name ap-
	     pears more than once in the archive, each copy will  be  extracted,
	     with later copies overwriting (replacing) earlier copies.

     In  -c,  -r,  or  -u mode, each specified file or directory is added to the
     archive in the order specified on the command line.  By default,  the  con-
     tents of each directory are also archived.

     In  extract or list mode, the entire command line is read and parsed before
     the archive is opened.  The pathnames or patterns on the command line indi-
     cate which items in the archive should be processed.  Patterns  are  shell-
     style globbing patterns as documented in tcsh(1).

OPTIONS
     Unless specifically stated otherwise, options are applicable in all operat-
     ing modes.

     @archive
	     (c and r mode only) The specified archive is opened and the entries
	     in  it  will be appended to the current archive.  As a simple exam-
	     ple,
		   tar -c -f - newfile @original.tar
	     writes a new archive to standard output containing a  file  newfile
	     and all of the entries from original.tar.	In contrast,
		   tar -c -f - newfile original.tar
	     creates a new archive with only two entries.  Similarly,
		   tar -czf - --format pax @-
	     reads  an	archive from standard input (whose format will be deter-
	     mined automatically) and converts it into	a  gzip-compressed  pax-
	     format  archive on stdout.  In this way, tar can be used to convert
	     archives from one format to another.

     -b blocksize
	     Specify the block size, in 512-byte records, for  tape  drive  I/O.
	     As  a rule, this argument is only needed when reading from or writ-
	     ing to tape drives, and usually not even then as the default  block
	     size of 20 records (10240 bytes) is very common.

     -C directory
	     In  c and r mode, this changes the directory before adding the fol-
	     lowing files.  In x mode,	change	directories  after  opening  the
	     archive but before extracting entries from the archive.

     --check-links (-W check-links)
	     (c  and  r  modes only) Issue a warning message unless all links to
	     each file are archived.

     --chroot (-W chroot)
	     (x mode only) chroot() to the current  directory  after  processing
	     any -C options and before extracting any files.

     --exclude pattern (-W exclude=pattern)
	     Do  not  process files or directories that match the specified pat-
	     tern.  Note that exclusions take precedence over patterns or  file-
	     names specified on the command line.

     --format format (-W format=format)
	     (c,  r,  u  mode  only)  Use  the	specified format for the created
	     archive.  Supported formats  include  "cpio",  "pax",  "shar",  and
	     "ustar".	Other formats may also be supported; see libarchive-for-
	     mats(5) for more information about currently-supported formats.  In
	     r and u modes, when extending an existing archive, the format spec-
	     ified here must be compatible  with  the  format  of  the	existing
	     archive on disk.

     -f file
	     Read  the	archive from or write the archive to the specified file.
	     The filename can be - for standard input or  standard  output.   If
	     not  specified, the default tape device will be used.  (On FreeBSD,
	     the default tape device is /dev/sa0.)

     -H      (c and r mode only) Symbolic links named on the command  line  will
	     be  followed; the target of the link will be archived, not the link
	     itself.

     -h      (c and r mode only) Synonym for -L.

     -I      Synonym for -T.

     --include pattern (-W include=pattern)
	     Process only files or directories that match the specified pattern.
	     Note that exclusions specified with --exclude take precedence  over
	     inclusions.  If no inclusions are explicitly specified, all entries
	     are  processed by default.  The --include option is especially use-
	     ful when filtering archives.  For example, the command
		   tar -c -f new.tar --include='*foo*' @old.tgz
	     creates a new archive new.tar  containing	only  the  entries  from
	     old.tgz containing the string `foo'.

     -j      (c mode only) Compress the resulting archive with bzip2(1).  In ex-
	     tract  or	list  modes,  this option is ignored.  Note that, unlike
	     other tar implementations,  this  implementation  recognizes  bzip2
	     compression automatically when reading archives.

     -k      (x mode only) Do not overwrite existing files.  In particular, if a
	     file  appears  more  than once in an archive, later copies will not
	     overwrite earlier copies.

     --keep-newer-files (-W keep-newer-files)
	     (x mode only) Do not overwrite existing files that are  newer  than
	     the versions appearing in the archive being extracted.

     -L      (c and r mode only) All symbolic links will be followed.  Normally,
	     symbolic  links are archived as such.  With this option, the target
	     of the link will be archived instead.

     -l      This is a synonym for the --check-links option.

     -m      (x mode only) Do not extract modification time.   By  default,  the
	     modification time is set to the time stored in the archive.

     -n      (c, r, u modes only) Do not recursively archive the contents of di-
	     rectories.

     --newer date (-W newer=date)
	     (c,  r, u modes only) Only include files and directories newer than
	     the specified date.  This compares ctime entries.

     --newer-mtime date (-W newer-mtime=date)
	     (c, r, u modes only) Like --newer, except it compares mtime entries
	     instead of ctime entries.

     --newer-than file (-W newer-than=file)
	     (c, r, u modes only) Only include files and directories newer  than
	     the specified file.  This compares ctime entries.

     --newer-mtime-than file (-W newer-mtime-than=file)
	     (c,  r,  u  modes only) Like --newer-than, except it compares mtime
	     entries instead of ctime entries.

     --nodump (-W nodump)
	     (c and r modes only) Honor the nodump file flag  by  skipping  this
	     file.

     --null (-W null)
	     (use  with  -I,  -T,  or -X) Filenames or patterns are separated by
	     null characters, not by newlines.	This is often used to read file-
	     names output by the -print0 option to find(1).

     --numeric-owner
	     (x mode only) Ignore symbolic user and group names  when  restoring
	     archives to disk, only numeric uid and gid values will be obeyed.

     -O      (x,  t  modes  only) In extract (-x) mode, files will be written to
	     standard out rather than being extracted to  disk.   In  list  (-t)
	     mode,  the  file  listing will be written to stderr rather than the
	     usual stdout.

     -o      (x mode) Use the user and group of the  user  running  the  program
	     rather  than those specified in the archive.  Note that this has no
	     significance unless -p is specified, and the program is  being  run
	     by  the root user.  In this case, the file modes and flags from the
	     archive will be restored, but ACLs  or  owner  information  in  the
	     archive will be discarded.

     -o      (c, r, u mode) A synonym for --format ustar

     --one-file-system (-W one-file-system)
	     (c, r, and u modes) Do not cross mount points.

     -P      Preserve pathnames.  By default, absolute pathnames (those that be-
	     gin  with	a  / character) have the leading slash removed both when
	     creating archives and extracting from them.  Also, tar will  refuse
	     to extract archive entries whose pathnames contain .. or whose tar-
	     get  directory  would  be	altered  by a symlink.	This option sup-
	     presses these behaviors.

     -p      (x mode only) Preserve file permissions.  Attempt	to  restore  the
	     full permissions, including owner, file modes, file flags and ACLs,
	     if  available,  for  each	item extracted from the archive.  By de-
	     fault, newly-created files are owned by the user running  tar,  the
	     file  mode  is  restored  for  newly-created regular files, and all
	     other types of entries receive default permissions.  If tar is  be-
	     ing  run by root, the default is to restore the owner unless the -o
	     option is also specified.

     -q (--fast-read)
	     (x and t mode only) Extract or list only the  first  archive  entry
	     that  matches  each  pattern  or filename operand.  Exit as soon as
	     each specified pattern or filename has been matched.   By	default,
	     the archive is always read to the very end, since there can be mul-
	     tiple  entries with the same name and, by convention, later entries
	     overwrite earlier entries.  This option is provided  as  a  perfor-
	     mance optimization.

     -S      (x  mode  only)  Extract files as sparse files.  For every block on
	     disk, check first if it contains only NULL bytes and seek	over  it
	     otherwise.  This works similiar to the conv=sparse option of dd.

     --strip-components count (-W strip-components=count)
	     (x and t mode only) Remove the specified number of leading path el-
	     ements.   Pathnames  with	fewer elements will be silently skipped.
	     Note that the pathname is edited after checking inclusion/exclusion
	     patterns but before security checks.

     -s pattern
	     Modify file or archive member names according to pattern.	The pat-
	     tern has the format /old/new/[gps].  old is a basic regular expres-
	     sion.  If it doesn't apply, the pattern is skipped.  new is the re-
	     placement string of the matched part.  ~ is  substituted  with  the
	     match, 1 to 9 with the content of the corresponding captured group.
	     The optional trailing g specifies that matching should continue af-
	     ter  the  matched	part and stopped on the first unmatched pattern.
	     The optional trailing s specifies that the pattern applies  to  the
	     value  of	symbolic  links.  The optional trailing p specifies that
	     after a successful substitution the original path name and the  new
	     path name should be printed to standard error.

     -T filename
	     In  x  or	t  mode, tar will read the list of names to be extracted
	     from filename.  In c mode, tar will read names to be archived  from
	     filename.	The special name "-C" on a line by itself will cause the
	     current  directory  to be changed to the directory specified on the
	     following line.  Names are terminated by newlines unless --null  is
	     specified.   Note that --null also disables the special handling of
	     lines containing "-C".

     -U      (x mode only) Unlink files before creating them.  Without this  op-
	     tion,  tar  overwrites  existing  files,  which  preserves existing
	     hardlinks.  With this option, existing hardlinks will be broken, as
	     will any symlink that would affect the  location  of  an  extracted
	     file.

     --use-compress-program program
	     Pipe  the	input (in x or t mode) or the output (in c mode) through
	     program instead of using the builtin compression support.

     -v      Produce verbose output.  In create and extract modes, tar will list
	     each file name as it is read from or written to  the  archive.   In
	     list mode, tar will produce output similar to that of ls(1).  Addi-
	     tional -v options will provide additional detail.

     --version
	     Print version of tar and libarchive, and exit.

     -W longopt=value
	     Long  options  (preceded by --) are only supported directly on sys-
	     tems that have the getopt_long(3) function.  The -W option  can  be
	     used  to  access  long  options on systems that do not support this
	     function.

     -w      Ask for confirmation for every action.

     -X filename
	     Read a list of exclusion patterns from  the  specified  file.   See
	     --exclude for more information about the handling of exclusions.

     -y      (c mode only) Compress the resulting archive with bzip2(1).  In ex-
	     tract  or	list  modes,  this option is ignored.  Note that, unlike
	     other tar implementations,  this  implementation  recognizes  bzip2
	     compression automatically when reading archives.

     -z      (c  mode only) Compress the resulting archive with gzip(1).  In ex-
	     tract or list modes, this option is  ignored.   Note  that,  unlike
	     other tar implementations, this implementation recognizes gzip com-
	     pression automatically when reading archives.

     -Z      (c  mode only) Compress the resulting archive with compress(1).  In
	     extract or list modes, this option is ignored.  Note  that,  unlike
	     other  tar implementations, this implementation recognizes compress
	     compression automatically when reading archives.

ENVIRONMENT
     The following environment variables affect the execution of tar:

     LANG	The locale to use.  See environ(7) for more information.

     TAPE	The default tape device.  The -f option overrides this.

     TZ 	The timezone to use when displaying dates.  See  environ(7)  for
		more information.

FILES
     /dev/sa0	The  default tape device, if not overridden by the TAPE environ-
		ment variable or the -f option.

EXIT STATUS
     The tar utility exits 0 on success, and >0 if an error occurs.

EXAMPLES
     The following creates a new archive called file.tar.gz  that  contains  two
     files source.c and source.h:
	   tar -czf file.tar.gz source.c source.h

     To view a detailed table of contents for this archive:
	   tar -tvf file.tar.gz

     To extract all entries from the archive on the default tape drive:
	   tar -x

     To examine the contents of an ISO 9660 cdrom image:
	   tar -tf image.iso

     To move file hierarchies, invoke tar as
	   tar -cf - -C srcdir . | tar -xpf - -C destdir
     or more traditionally
	   cd srcdir ; tar -cf - . | (cd destdir ; tar -xpf -)

     In  create  mode, the list of files and directories to be archived can also
     include directory change instructions of the form -Cfoo/baz and archive in-
     clusions of the form @archive-file.  For example, the command line
	   tar -c -f new.tar foo1 @old.tgz -C/tmp foo2
     will create a new archive new.tar.  tar will read the file  foo1  from  the
     current directory and add it to the output archive.  It will then read each
     entry  from  old.tgz and add those entries to the output archive.	Finally,
     it will switch to the /tmp directory and add foo2 to the output archive.

     An input file in mtree(5) format can be used to create  an  output  archive
     with  arbitrary  ownership, permissions, or names that differ from existing
     data on disk:

	   $ cat input.mtree
	   #mtree
	   usr/bin uid=0 gid=0 mode=0755 type=dir
	   usr/bin/ls uid=0 gid=0 mode=0755 type=file content=myls
	   $ tar -cvf output.tar @input.mtree

     The --newer and --newer-mtime switches accept a variety of common date  and
     time specifications, including "12 Mar 2005 7:14:29pm", "2005-03-12 19:14",
     "5 minutes ago", and "19:14 PST May 1".

COMPATIBILITY
     The  bundled-arguments  format is supported for compatibility with historic
     implementations.  It consists of an initial word (with no leading - charac-
     ter) in which each character indicates an option.	Arguments follow as sep-
     arate words.  The order of the arguments must match the order of the corre-
     sponding characters in the bundled command word.  For example,
	   tar tbf 32 file.tar
     specifies three flags t, b, and f.  The b and f flags  both  require  argu-
     ments,  so  there must be two additional items on the command line.  The 32
     is the argument to the b flag, and file.tar is the argument to the f flag.

     The mode options c, r, t, u, and x and the options b, f, l, m, o, v, and  w
     comply with SUSv2.

     For maximum portability, scripts that invoke tar should use the bundled-ar-
     gument  format above, should limit themselves to the c, t, and x modes, and
     the b, f, m, v, and w options.

     On systems that support getopt_long(), additional long options  are  avail-
     able to improve compatibility with other tar implementations.

SECURITY
     Certain  security	issues	are common to many archiving programs, including
     tar.  In particular, carefully-crafted archives can request  that	tar  ex-
     tract  files to locations outside of the target directory.  This can poten-
     tially be used to cause unwitting users to overwrite files they did not in-
     tend to overwrite.  If the archive is being extracted by the superuser, any
     file on the system can potentially be overwritten.  There	are  three  ways
     this  can happen.	Although tar has mechanisms to protect against each one,
     savvy users should be aware of the implications:

     *	     Archive entries can have absolute pathnames.  By default,	tar  re-
	     moves  the leading / character from filenames before restoring them
	     to guard against this problem.

     *	     Archive entries can have pathnames that include .. components.   By
	     default,  tar  will  not  extract files containing .. components in
	     their pathname.

     *	     Archive entries can exploit symbolic  links  to  restore  files  to
	     other  directories.   An archive can restore a symbolic link to an-
	     other directory, then use that link to restore a file into that di-
	     rectory.  To guard against this, tar checks each extracted path for
	     symlinks.	If the final path element is a symlink, it will  be  re-
	     moved and replaced with the archive entry.  If -U is specified, any
	     intermediate symlink will also be unconditionally removed.  If nei-
	     ther -U nor -P is specified, tar will refuse to extract the entry.
     To  protect yourself, you should be wary of any archives that come from un-
     trusted sources.  You should examine the contents of an archive with
	   tar -tf filename
     before extraction.  You should use the -k option to ensure  that  tar  will
     not  overwrite any existing files or the -U option to remove any pre-exist-
     ing files.  You should generally not extract archives  while  running  with
     super-user  privileges.   Note that the -P option to tar disables the secu-
     rity checks above and allows you to extract an archive while preserving any
     absolute pathnames, .. components, or symlinks to other directories.

SEE ALSO
     bzip2(1),	compress(1),   cpio(1),   gzip(1),   mt(1),   pax(1),	shar(1),
     libarchive(3), libarchive-formats(5), tar(5)

STANDARDS
     There  is	no  current  POSIX  standard for the tar command; it appeared in
     ISO/IEC 9945-1:1996 ("POSIX.1") but was dropped from IEEE	Std  1003.1-2001
     ("POSIX.1").   The  options  used	by this implementation were developed by
     surveying a number of existing tar implementations as well as the old POSIX
     specification for tar and the current POSIX specification for pax.

     The ustar and  pax  interchange  file  formats  are  defined  by  IEEE  Std
     1003.1-2001 ("POSIX.1") for the pax command.

HISTORY
     A tar command appeared in Seventh Edition Unix, which was released in Janu-
     ary,  1979.   There have been numerous other implementations, many of which
     extended the file format.	John Gilmore's pdtar  public-domain  implementa-
     tion  (circa November, 1987) was quite influential, and formed the basis of
     GNU tar.  GNU tar was included as the standard system tar in FreeBSD begin-
     ning with FreeBSD 1.0.

     This is a complete re-implementation based on the libarchive(3) library.

BUGS
     This program follows ISO/IEC 9945-1:1996 ("POSIX.1") for the definition  of
     the  -l  option.	Note  that GNU tar prior to version 1.15 treated -l as a
     synonym for the --one-file-system option.

     The -C dir option may differ from historic implementations.

     All archive output is written in correctly-sized blocks, even if the output
     is being compressed.  Whether or not the last output block is padded  to  a
     full  block size varies depending on the format and the output device.  For
     tar and cpio formats, the last block of output is padded to  a  full  block
     size if the output is being written to standard output or to a character or
     block  device  such  as  a tape drive.  If the output is being written to a
     regular file, the last block will not be padded.  Many compressors, includ-
     ing gzip(1) and bzip2(1), complain about the null padding when  decompress-
     ing an archive created by tar, although they still extract it correctly.

     The  compression  and decompression is implemented internally, so there may
     be insignificant differences between the compressed output generated by
	   tar -czf - file
     and that generated by
	   tar -cf - file | gzip

     The default should be to read and write archives to the standard I/O paths,
     but tradition (and POSIX) dictates otherwise.

     The r and u modes require that the archive be uncompressed and located in a
     regular file on disk.  Other archives can be modified using c mode with the
     @archive-file extension.

     To archive a file called @foo or -foo you must  specify  it  as  ./@foo  or
     ./-foo, respectively.

     In  create  mode,	a leading ./ is always removed.  A leading / is stripped
     unless the -P option is specified.

     There needs to be better support for file selection on both create and  ex-
     tract.

     There  is	not  yet  any support for multi-volume archives or for archiving
     sparse files.

     Converting between dissimilar archive formats (such as tar and cpio)  using
     the  @-  convention can cause hard link information to be lost.  (This is a
     consequence of the incompatible ways that different archive  formats  store
     hardlink information.)

     There  are  alternative long options for many of the short options that are
     deliberately not documented.

FreeBSD 6.4			  May 15, 2008			       BSDTAR(1)

home | help