home | help
TWA(4)			     Kernel Interfaces Manual			  TWA(4)

NAME
     twa -- 3ware 9000/9500/9550/9650 series SATA RAID controllers driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device scbus
	   device twa

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   twa_load="YES"

DESCRIPTION
     The twa driver provides support for AMCC's 3ware 9000/9500/9550/9650 series
     SATA controllers.

     These  controllers are available in 4, 8, 12 or 16-port configurations, and
     support the following RAID levels: 0, 1, 10, 5, 50.  The device  nodes  for
     the  controllers  are of the form /dev/twaX, where X is the controller num-
     ber.  The driver is implemented as a SCSI SIM under CAM, and, as such,  the
     logical  units  that  it  controls  are  accessible  via  the device nodes,
     /dev/daY, where Y is the logical unit number.

HARDWARE
     The twa driver supports the following SATA RAID controllers:

     *	 AMCC's 3ware 9500S-4LP
     *	 AMCC's 3ware 9500S-8
     *	 AMCC's 3ware 9500S-8MI
     *	 AMCC's 3ware 9500S-12
     *	 AMCC's 3ware 9500S-12MI
     *	 AMCC's 3ware 9500SX-4LP
     *	 AMCC's 3ware 9500SX-8LP
     *	 AMCC's 3ware 9500SX-12
     *	 AMCC's 3ware 9500SX-12MI
     *	 AMCC's 3ware 9500SX-16ML
     *	 AMCC's 3ware 9550SX-4LP
     *	 AMCC's 3ware 9550SX-8LP
     *	 AMCC's 3ware 9550SX-12
     *	 AMCC's 3ware 9550SX-12MI
     *	 AMCC's 3ware 9550SX-16ML
     *	 AMCC's 3ware 9650SE-2LP
     *	 AMCC's 3ware 9650SE-4LPML
     *	 AMCC's 3ware 9650SE-8LPML
     *	 AMCC's 3ware 9650SE-12ML
     *	 AMCC's 3ware 9650SE-16ML
     *	 AMCC's 3ware 9650SE-24M8

DIAGNOSTICS
     Whenever the driver encounters a command failure, it prints  out  an  error
     code in the format: "ERROR: (<error source>: <error code>):", followed by a
     text description of the error.  There are other error messages and warnings
     that  the	driver	prints out, depending on the kinds of errors that it en-
     counters.	If the driver is compiled with TWA_DEBUG defined, it prints  out
     a	whole bunch of debug messages, the quantity of which varies depending on
     the value assigned to TWA_DEBUG (0 to 10).

AUTHORS
     The   twa	 driver   and	manpage   were	 written   by	Vinod	 Kashyap
     <vkashyap@FreeBSD.org>.

FreeBSD 6.4			   May 9, 2007				  TWA(4)

home | help