UBSA(4) Kernel Interfaces Manual UBSA(4) NAME ubsa -- USB support for Belkin serial adapters SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device ubsa device ucom Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): ubsa_load="YES" DESCRIPTION The ubsa driver provides support for the USB-to-RS232 Bridge chip used by a variety of serial adapters from Belkin and other vendors. The device is accessed through the ucom(4) driver which makes it behave like a tty(4). HARDWARE The ubsa driver supports the following adapters: * AnyData ADU-E100A (no EV-DO mode support) * Belkin F5U103 * Belkin F5U120 * e-Tek Labs Kwik232 * GoHubs GoCOM232 * Huawei Technologies Mobile card (3G) * Novatel Wireless Merlin U740 (only basic modem port supported) * Option Globetrotter 3G (aka Vodafone Mobile Connect Card 3G) * Option Globetrotter 3G Quad * Option Globetrotter 3G Fusion (no WLAN support, only basic 3G modem port) * Option Globetrotter 3G Fusion Quad (no WLAN support) * Peracom single port serial adapter * Qualcomm, Inc. ZTE CDMA Technologies MSM The supported 3G cards provide the necessary modem port for ppp, pppd, or mpd connections; other functions of these cards (diagnostic port, SIM toolkit port, WLAN) are not supported. SEE ALSO tty(4), ucom(4), usb(4) HISTORY The ubsa driver appeared in FreeBSD 5.0. The uplcom(4) manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002 and modified for the ubsa driver by Alexander Kabaev <kan@FreeBSD.org> in Octo- ber 2002. AUTHORS The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>. FreeBSD 7.1 April 8, 2008 UBSA(4)
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=ubsa&sektion=4&manpath=FreeBSD+7.1-RELEASE>