home | help
VMSTAT(8)		     System Manager's Manual		       VMSTAT(8)

NAME
     vmstat -- report virtual memory statistics

SYNOPSIS
     vmstat [-afHhimPsz] [-c count] [-M core [-N system]] [-w wait] [-n devs]
	    [-p type,if,pass] [disks]

DESCRIPTION
     The  vmstat  utility  reports certain kernel statistics kept about process,
     virtual memory, disk, trap and cpu activity.

     If the -M option is not specified, information is obtained  from  the  cur-
     rently  running kernel via the sysctl(3) interface.  Otherwise, information
     is read from the specified core file, using the name list from  the  speci-
     fied kernel image (or from the default image).

     The options are as follows:

     -a      When  used  with  -i, include statistics about interrupts that have
	     never been generated.

     -c      Repeat the display count times.  The first display is for the  time
	     since  a  reboot  and each subsequent report is for the time period
	     since the last display.  If no repeat count is specified, and -w is
	     specified, the default is infinity, otherwise the default is one.

     -f      Report on the number fork(2), vfork(2) and  rfork(2)  system  calls
	     since system startup, and the number of pages of virtual memory in-
	     volved in each.

     -h      Changes  memory  columns into more easily human readable form.  De-
	     fault if standard output is a terminal device.

     -H      Changes memory columns into straight numbers.  Default if	standard
	     output is not a terminal device (such as a script).

     -i      Report  on the number of interrupts taken by each device since sys-
	     tem startup.

     -M      Extract values associated with the name  list  from  the  specified
	     core.

     -N      If  -M  is also specified, extract the name list from the specified
	     system instead of the default, which is the kernel image the system
	     has booted from.

     -m      Report on the usage of kernel dynamic memory allocated  using  mal-
	     loc(9) by type.

     -n      Change  the  maximum number of disks to display from the default of
	     2.

     -P      Report per-cpu system/user/idle cpu statistics.

     -p      Specify which types of devices to display.  There are three differ-
	     ent categories of devices:

	     device type:
		     da 	Direct Access devices
		     sa 	Sequential Access devices
		     printer	Printers
		     proc	Processor devices
		     worm	Write Once Read Multiple devices
		     cd 	CD devices
		     scanner	Scanner devices
		     optical	Optical Memory devices
		     changer	Medium Changer devices
		     comm	Communication devices
		     array	Storage Array devices
		     enclosure	Enclosure Services devices
		     floppy	Floppy devices

	     interface:
		     IDE	Integrated Drive Electronics devices
		     SCSI	Small Computer System Interface devices
		     other	Any other device interface

	     passthrough:
		     pass	Passthrough devices

	     The user must specify at least one device type, and may specify  at
	     most  one device type from each category.	Multiple device types in
	     a single device type statement must be separated by commas.

	     Any number of -p arguments may be specified on  the  command  line.
	     All  -p  arguments  are ORed together to form a matching expression
	     against which all devices in the system are compared.   Any  device
	     that  fully  matches any -p argument will be included in the vmstat
	     output, up to two devices, or the maximum number of devices  speci-
	     fied by the user.

     -s      Display  the contents of the sum structure, giving the total number
	     of several kinds of paging related events which have occurred since
	     system startup.

     -w      Pause wait seconds between each display.  If no repeat wait  inter-
	     val is specified, the default is 1 second.

     -z      Report  on  memory  used  by  the kernel zone allocator, uma(9), by
	     zone.

     By default, vmstat displays the following information:

     procs   Information about the numbers of processes in various states.

	     r	     in run queue
	     b	     blocked for resources (i/o, paging, etc.)
	     w	     runnable or short sleeper (< 20 secs) but swapped

     memory  Information about the usage of virtual and  real  memory.	 Virtual
	     pages  (reported  in  units of 1024 bytes) are considered active if
	     they belong to processes which are running or have run in the  last
	     20 seconds.

	     avm     active virtual pages
	     fre     size of the free list

     page    Information about page faults and paging activity.  These are aver-
	     aged each five seconds, and given in units per second.

	     flt     total number of page faults
	     re      page reclaims (simulating reference bits)
	     pi      pages paged in
	     po      pages paged out
	     fr      pages freed per second
	     sr      pages scanned by clock algorithm, per-second

     disks   Disk operations per second (this field is system dependent).  Typi-
	     cally paging will be split across the available drives.  The header
	     of  the  field is the first two characters of the disk name and the
	     unit number.  If more than two disk drives are  configured  in  the
	     system,  vmstat displays only the first two drives, unless the user
	     specifies the -n argument to increase the	number	of  drives  dis-
	     played.  This will probably cause the display to exceed 80 columns,
	     however.	To  force vmstat to display specific drives, their names
	     may be supplied on the command line.  The vmstat  utility	defaults
	     to  show  disks first, and then various other random devices in the
	     system to add up to two devices, if there are that many devices  in
	     the  system.  If devices are specified on the command line, or if a
	     device type matching pattern is specified (see above), vmstat  will
	     only display the given devices or the devices matching the pattern,
	     and will not randomly select other devices in the system.

     faults  Trap/interrupt rate averages per second over last 5 seconds.

	     in      device interrupts per interval (including clock interrupts)
	     sy      system calls per interval
	     cs      cpu context switch rate (switches/interval)

     cpu     Breakdown of percentage usage of CPU time.

	     us      user time for normal and low priority processes
	     sy      system time
	     id      cpu idle

FILES
     /boot/kernel/kernel  default kernel namelist
     /dev/kmem		  default memory file

EXAMPLES
     The command:
	   vmstat -w 5
     will  print  what	the  system  is doing every five seconds; this is a good
     choice of printing interval since this is how often some of the  statistics
     are sampled in the system.  Others vary every second and running the output
     for a while will make it apparent which are recomputed every second.

     The command:
	   vmstat -p da -p cd -w 1
     will tell vmstat to select the first two direct access or CDROM devices and
     display  statistics  on  those devices, as well as other systems statistics
     every second.

SEE ALSO
     fstat(1),	netstat(1),   nfsstat(1),   ps(1),   systat(1),   libmemstat(3),
     gstat(8), iostat(8), pstat(8), sysctl(8), malloc(9), uma(9)

     The  sections  starting with ``Interpreting system activity'' in Installing
     and Operating 4.3BSD.

BUGS
     The -c and -w options are only available with the default output.

FreeBSD 7.1			October 21, 2006		       VMSTAT(8)

home | help