NMAP(1) Nmap Network Scanning (PRE-REL NMAP(1) NAME nmap - Network exploration tool and security / port scanner SYNOPSIS nmap [Scan Type...] [Options] {target specification} DESCRIPTION Nmap ("Network Mapper") is an open source tool for network exploration and security auditing. It was designed to rapidly scan large networks, although it works fine against single hosts. Nmap uses raw IP packets in novel ways to determine what hosts are available on the network, what services (appli- cation name and version) those hosts are offering, what operating systems (and OS versions) they are running, what type of packet filters/firewalls are in use, and dozens of other characteristics. While Nmap is commonly used for security audits, many systems and network administrators find it useful for routine tasks such as network inventory, managing service up- grade schedules, and monitoring host or service uptime. The output from Nmap is a list of scanned targets, with supplemental infor- mation on each depending on the options used. Key among that information is the "interesting ports table". That table lists the port number and proto- col, service name, and state. The state is either open, filtered, closed, or unfiltered. Open means that an application on the target machine is lis- tening for connections/packets on that port. Filtered means that a fire- wall, filter, or other network obstacle is blocking the port so that Nmap cannot tell whether it is open or closed. Closed ports have no application listening on them, though they could open up at any time. Ports are classi- fied as unfiltered when they are responsive to Nmap's probes, but Nmap can- not determine whether they are open or closed. Nmap reports the state com- binations open|filtered and closed|filtered when it cannot determine which of the two states describe a port. The port table may also include software version details when version detection has been requested. When an IP pro- tocol scan is requested (-sO), Nmap provides information on supported IP protocols rather than listening ports. In addition to the interesting ports table, Nmap can provide further infor- mation on targets, including reverse DNS names, operating system guesses, device types, and MAC addresses. A typical Nmap scan is shown in Example 15.1, "A representative Nmap scan". The only Nmap arguments used in this example are -A, to enable OS and ver- sion detection, script scanning, and traceroute; -T4 for faster execution; and then the two target hostnames. Example 15.1. A representative Nmap scan # nmap -A -T4 scanme.nmap.org playground Starting Nmap ( http://nmap.org ) Interesting ports on scanme.nmap.org (205.217.153.62): (The 1663 ports scanned but not shown below are in state: filtered) PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 3.9p1 (protocol 1.99) 53/tcp open domain 70/tcp closed gopher 80/tcp open http Apache httpd 2.0.52 ((Fedora)) 113/tcp closed auth Device type: general purpose Running: Linux 2.4.X|2.5.X|2.6.X OS details: Linux 2.4.7 - 2.6.11, Linux 2.6.0 - 2.6.11 Uptime 33.908 days (since Thu Jul 21 03:38:03 2005) Interesting ports on playground.nmap.org (192.168.0.40): (The 1659 ports scanned but not shown below are in state: closed) PORT STATE SERVICE VERSION 135/tcp open msrpc Microsoft Windows RPC 139/tcp open netbios-ssn 389/tcp open ldap? 445/tcp open microsoft-ds Microsoft Windows XP microsoft-ds 1002/tcp open windows-icfw? 1025/tcp open msrpc Microsoft Windows RPC 1720/tcp open H.323/Q.931 CompTek AquaGateKeeper 5800/tcp open vnc-http RealVNC 4.0 (Resolution 400x250; VNC port: 5900) 5900/tcp open vnc VNC (protocol 3.8) MAC Address: 00:A0:CC:63:85:4B (Lite-on Communications) Device type: general purpose Running: Microsoft Windows NT/2K/XP OS details: Microsoft Windows XP Pro RC1+ through final release Service Info: OSs: Windows, Windows XP Nmap finished: 2 IP addresses (2 hosts up) scanned in 88.392 seconds The newest version of Nmap can be obtained from http://nmap.org. The newest version of the man page is available at http://nmap.org/book/man.html. OPTIONS SUMMARY This options summary is printed when Nmap is run with no arguments, and the latest version is always available at http://nmap.org/data/nmap.usage.txt. It helps people remember the most common options, but is no substitute for the in-depth documentation in the rest of this manual. Some obscure options aren't even included here. Nmap 4.68 ( http://nmap.org ) Usage: nmap [Scan Type(s)] [Options] {target specification} TARGET SPECIFICATION: Can pass hostnames, IP addresses, networks, etc. Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254 -iL <inputfilename>: Input from list of hosts/networks -iR <num hosts>: Choose random targets --exclude <host1[,host2][,host3],...>: Exclude hosts/networks --excludefile <exclude_file>: Exclude list from file HOST DISCOVERY: -sL: List Scan - simply list targets to scan -sP: Ping Scan - go no further than determining if host is online -PN: Treat all hosts as online -- skip host discovery -PS/PA/PU [portlist]: TCP SYN/ACK or UDP discovery to given ports -PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes -PO [protocol list]: IP Protocol Ping -n/-R: Never do DNS resolution/Always resolve [default: sometimes] --dns-servers <serv1[,serv2],...>: Specify custom DNS servers --system-dns: Use OS's DNS resolver SCAN TECHNIQUES: -sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans -sU: UDP Scan -sN/sF/sX: TCP Null, FIN, and Xmas scans --scanflags <flags>: Customize TCP scan flags -sI <zombie host[:probeport]>: Idle scan -sO: IP protocol scan -b <FTP relay host>: FTP bounce scan --traceroute: Trace hop path to each host --reason: Display the reason a port is in a particular state PORT SPECIFICATION AND SCAN ORDER: -p <port ranges>: Only scan specified ports Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080 -F: Fast mode - Scan fewer ports than the default scan -r: Scan ports consecutively - don't randomize --top-ports <number>: Scan <number> most common ports --port-ratio <ratio>: Scan ports more common than <ratio> SERVICE/VERSION DETECTION: -sV: Probe open ports to determine service/version info --version-intensity <level>: Set from 0 (light) to 9 (try all probes) --version-light: Limit to most likely probes (intensity 2) --version-all: Try every single probe (intensity 9) --version-trace: Show detailed version scan activity (for debugging) SCRIPT SCAN: -sC: equivalent to --script=default --script=<Lua scripts>: <Lua scripts> is a comma separated list of directories, script-files or script-categories --script-args=<n1=v1,[n2=v2,...]>: provide arguments to scripts --script-trace: Show all data sent and received --script-updatedb: Update the script database. OS DETECTION: -O: Enable OS detection --osscan-limit: Limit OS detection to promising targets --osscan-guess: Guess OS more aggressively TIMING AND PERFORMANCE: Options which take <time> are in milliseconds, unless you append 's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m). -T[0-5]: Set timing template (higher is faster) --min-hostgroup/max-hostgroup <size>: Parallel host scan group sizes --min-parallelism/max-parallelism <time>: Probe parallelization --min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>: Specifies probe round trip time. --max-retries <tries>: Caps number of port scan probe retransmissions. --host-timeout <time>: Give up on target after this long --scan-delay/--max-scan-delay <time>: Adjust delay between probes --min-rate <number>: Send packets no slower than <number> per second FIREWALL/IDS EVASION AND SPOOFING: -f; --mtu <val>: fragment packets (optionally w/given MTU) -D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys -S <IP_Address>: Spoof source address -e <iface>: Use specified interface -g/--source-port <portnum>: Use given port number --data-length <num>: Append random data to sent packets --ip-options <options>: Send packets with specified ip options --ttl <val>: Set IP time-to-live field --spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address --badsum: Send packets with a bogus TCP/UDP checksum OUTPUT: -oN/-oX/-oS/-oG <file>: Output scan in normal, XML, s|<rIpt kIddi3, and Grepable format, respectively, to the given filename. -oA <basename>: Output in the three major formats at once -v: Increase verbosity level (use twice or more for greater effect) -d[level]: Set or increase debugging level (Up to 9 is meaningful) --open: Only show open (or possibly open) ports --packet-trace: Show all packets sent and received --iflist: Print host interfaces and routes (for debugging) --log-errors: Log errors/warnings to the normal-format output file --append-output: Append to rather than clobber specified output files --resume <filename>: Resume an aborted scan --stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML --webxml: Reference stylesheet from Nmap.Org for more portable XML --no-stylesheet: Prevent associating of XSL stylesheet w/XML output MISC: -6: Enable IPv6 scanning -A: Enables OS detection and Version detection, Script scanning and Traceroute --datadir <dirname>: Specify custom Nmap data file location --send-eth/--send-ip: Send using raw ethernet frames or IP packets --privileged: Assume that the user is fully privileged --unprivileged: Assume the user lacks raw socket privileges -V: Print version number -h: Print this help summary page. EXAMPLES: nmap -v -A scanme.nmap.org nmap -v -sP 192.168.0.0/16 10.0.0.0/8 nmap -v -iR 10000 -PN -p 80 SEE THE MAN PAGE FOR MANY MORE OPTIONS, DESCRIPTIONS, AND EXAMPLES TARGET SPECIFICATION Everything on the Nmap command-line that isn't an option (or option argu- ment) is treated as a target host specification. The simplest case is to specify a target IP address or hostname for scanning. Sometimes you wish to scan a whole network of adjacent hosts. For this, Nmap supports CIDR-style addressing. You can append /numbits to an IP ad- dress or hostname and Nmap will scan every IP address for which the first numbits are the same as for the reference IP or hostname given. For exam- ple, 192.168.10.0/24 would scan the 256 hosts between 192.168.10.0 (binary: 11000000 10101000 00001010 00000000) and 192.168.10.255 (binary: 11000000 10101000 00001010 11111111), inclusive. 192.168.10.40/24 would do exactly the same thing. Given that the host scanme.nmap.org is at the IP address 205.217.153.62, the specification scanme.nmap.org/16 would scan the 65,536 IP addresses between 205.217.0.0 and 205.217.255.255. The smallest allowed value is /0, which scans the whole Internet. The largest value is 32, which scans just the named host or IP address because all address bits are fixed. CIDR notation is short but not always flexible enough. For example, you might want to scan 192.168.0.0/16 but skip any IPs ending with .0 or .255 because they are commonly broadcast addresses. Nmap supports this through octet range addressing. Rather than specify a normal IP address, you can specify a comma separated list of numbers or ranges for each octet. For ex- ample, 192.168.0-255.1-254 will skip all addresses in the range that end in .0 and or .255. Ranges need not be limited to the final octets: the speci- fier 0-255.0-255.13.37 will perform an Internet-wide scan for all IP ad- dresses ending in 13.37. This sort of broad sampling can be useful for In- ternet surveys and research. IPv6 addresses can only be specified by their fully qualified IPv6 address or hostname. CIDR and octet ranges aren't supported for IPv6 because they are rarely useful. Nmap accepts multiple host specifications on the command line, and they don't need to be the same type. The command nmap scanme.nmap.org 192.168.0.0/16 10.0.0,1,3-7.0-255 does what you would expect. While targets are usually specified on the command lines, the following op- tions are also available to control target selection: -iL <inputfilename> (Input from list) Reads target specifications from inputfilename. Passing a huge list of hosts is often awkward on the command line, yet it is a common desire. For example, your DHCP server might export a list of 10,000 current leases that you wish to scan. Or maybe you want to scan all IP ad- dresses except for those to locate hosts using unauthorized static IP addresses. Simply generate the list of hosts to scan and pass that filename to Nmap as an argument to the -iL option. Entries can be in any of the formats accepted by Nmap on the command line (IP address, hostname, CIDR, IPv6, or octet ranges). Each entry must be separated by one or more spaces, tabs, or newlines. You can specify a hyphen (-) as the filename if you want Nmap to read hosts from standard input rather than an actual file. -iR <num hosts> (Choose random targets) For Internet-wide surveys and other research, you may want to choose targets at random. The num hosts argument tells Nmap how many IPs to generate. Undesirable IPs such as those in certain private, multicast, or unallocated address ranges are automatically skipped. The argument 0 can be specified for a never-ending scan. Keep in mind that some net- work administrators bristle at unauthorized scans of their networks and may complain. Use this option at your own risk! If you find yourself really bored one rainy afternoon, try the command nmap -sS -PS80 -iR 0 -p 80 to locate random web servers for browsing. --exclude <host1[,host2][,host3],...> (Exclude hosts/networks) Specifies a comma-separated list of targets to be excluded from the scan even if they are part of the overall network range you specify. The list you pass in uses normal Nmap syntax, so it can include host- names, CIDR netblocks, octet ranges, etc. This can be useful when the network you wish to scan includes untouchable mission-critical servers, systems that are known to react adversely to port scans, or subnetworks administered by other people. --excludefile <exclude_file> (Exclude list from file) This offers the same functionality as the --exclude option, except that the excluded targets are provided in a newline, space, or tab delimited exclude_file rather than on the command line. HOST DISCOVERY One of the very first steps in any network reconnaissance mission is to re- duce a (sometimes huge) set of IP ranges into a list of active or interest- ing hosts. Scanning every port of every single IP address is slow and usu- ally unnecessary. Of course what makes a host interesting depends greatly on the scan purposes. Network administrators may only be interested in hosts running a certain service, while security auditors may care about every single device with an IP address. An administrator may be comfortable using just an ICMP ping to locate hosts on his internal network, while an external penetration tester may use a diverse set of dozens of probes in an attempt to evade firewall restrictions. Because host discovery needs are so diverse, Nmap offers a wide variety of options for customizing the techniques used. Host discovery is sometimes called ping scan, but it goes well beyond the simple ICMP echo request packets associated with the ubiquitous ping tool. Users can skip the ping step entirely with a list scan (-sL) or by disabling ping (-PN), or engage the network with arbitrary combinations of multi-port TCP SYN/ACK, UDP, and ICMP probes. The goal of these probes is to solicit responses which demon- strate that an IP address is actually active (is being used by a host or network device). On many networks, only a small percentage of IP addresses are active at any given time. This is particularly common with private ad- dress space such as 10.0.0.0/8. That network has 16 million IPs, but I have seen it used by companies with less than a thousand machines. Host discov- ery can find those machines in a sparsely allocated sea of IP addresses. If no host discovery options are given, Nmap sends a TCP ACK packet des- tined for port 80 and an ICMP echo request query to each target machine. An exception to this is that an ARP scan is used for any targets which are on a local ethernet network. For unprivileged Unix shell users, a SYN packet is sent instead of the ack using the connect() system call. These defaults are equivalent to the -PA -PE options. This host discovery is often suffi- cient when scanning local networks, but a more comprehensive set of discov- ery probes is recommended for security auditing. The -P* options (which select ping types) can be combined. You can increase your odds of penetrating strict firewalls by sending many probe types using different TCP ports/flags and ICMP codes. Also note that ARP discovery (-PR) is done by default against targets on a local ethernet network even if you specify other -P* options, because it is almost always faster and more effective. By default, Nmap does host discovery and then performs a port scan against each host it determines is online. This is true even if you specify non-de- fault host discovery types such as UDP probes (-PU). Read about the -sP op- tion to learn how to perform only host discovery, or use -PN to skip host discovery and port scan all target hosts. The following options control host discovery: -sL (List Scan) The list scan is a degenerate form of host discovery that simply lists each host of the network(s) specified, without sending any packets to the target hosts. By default, Nmap still does reverse-DNS resolution on the hosts to learn their names. It is often surprising how much useful information simple hostnames give out. For example, fw.chi is the name of one company's Chicago firewall. Nmap also reports the total number of IP addresses at the end. The list scan is a good sanity check to en- sure that you have proper IP addresses for your targets. If the hosts sport domain names you do not recognize, it is worth investigating fur- ther to prevent scanning the wrong company's network. Since the idea is to simply print a list of target hosts, options for higher level functionality such as port scanning, OS detection, or ping scanning cannot be combined with this. If you wish to disable ping scanning while still performing such higher level functionality, read up on the -PN option. -sP (Ping Scan) This option tells Nmap to only perform a ping scan (host discovery), then print out the available hosts that responded to the scan. No fur- ther testing (such as port scanning or OS detection) is performed. This is one step more intrusive than the list scan, and can often be used for the same purposes. It allows light reconnaissance of a target net- work without attracting much attention. Knowing how many hosts are up is more valuable to attackers than the list provided by list scan of every single IP and host name. Systems administrators often find this option valuable as well. It can easily be used to count available machines on a network or monitor server availability. This is often called a ping sweep, and is more re- liable than pinging the broadcast address because many hosts do not re- ply to broadcast queries. The -sP option sends an ICMP echo request and a TCP packet to port 80 by default. When executed by an unprivileged user, only a SYN packet is sent (using a connect() call) to port 80 on the target. When a privi- leged user tries to scan targets on a local ethernet network, ARP re- quests (-PR) are used unless --send-ip was specified. The -sP option can be combined with any of the discovery probe types (the -P* options, excluding -PN) for greater flexibility. If any of those probe type and port number options are used, the default probes (ACK and echo request) are overridden. When strict firewalls are in place between the source host running Nmap and the target network, using those advanced tech- niques is recommended. Otherwise hosts could be missed when the fire- wall drops probes or their responses. -PN (No ping) This option skips the Nmap discovery stage altogether. Normally, Nmap uses this stage to determine active machines for heavier scanning. By default, Nmap only performs heavy probing such as port scans, version detection, or OS detection against hosts that are found to be up. Dis- abling host discovery with -PN causes Nmap to attempt the requested scanning functions against every target IP address specified. So if a class B sized target address space (/16) is specified on the command line, all 65,536 IP addresses are scanned. Proper host discovery is skipped as with the list scan, but instead of stopping and printing the target list, Nmap continues to perform requested functions as if each target IP is active. For machines on a local ethernet network, ARP scanning will still be performed (unless --send-ip is specified) be- cause Nmap needs MAC addresses to further scan target hosts. This op- tion flag for this used to be P0 (uses zero), but was renamed to avoid confusion with protocol ping's PO (uses the letter O) flag. -PS [portlist] (TCP SYN Ping) This option sends an empty TCP packet with the SYN flag set. The de- fault destination port is 80 (configurable at compile time by changing DEFAULT_TCP_PROBE_PORT_SPEC in nmap.h). Alternate ports can be speci- fied as a parameter. The syntax is the same as for the -p except that port type specifiers like T: are not allowed. Examples are -PS22 and -PS22-25,80,113,1050,35000. Note that there can be no space between -PS and the port list. If multiple probes are specified they will be sent in parallel. The SYN flag suggests to the remote system that you are attempting to establish a connection. Normally the destination port will be closed, and a RST (reset) packet sent back. If the port happens to be open, the target will take the second step of a TCP 3-way-handshake by responding with a SYN/ACK TCP packet. The machine running Nmap then tears down the nascent connection by responding with a RST rather than sending an ACK packet which would complete the 3-way-handshake and establish a full connection. The RST packet is sent by the kernel of the machine running Nmap in response to the unexpected SYN/ACK, not by Nmap itself. Nmap does not care whether the port is open or closed. Either the RST or SYN/ACK response discussed previously tell Nmap that the host is available and responsive. On Unix boxes, only the privileged user root is generally able to send and receive raw TCP packets. For unprivileged users, a workaround is automatically employed whereby the connect() system call is initiated against each target port. This has the effect of sending a SYN packet to the target host, in an attempt to establish a connection. If con- nect() returns with a quick success or an ECONNREFUSED failure, the un- derlying TCP stack must have received a SYN/ACK or RST and the host is marked available. If the connection attempt is left hanging until a timeout is reached, the host is marked as down. This workaround is also used for IPv6 connections, as raw IPv6 packet building support is not yet available in Nmap. -PA [portlist] (TCP ACK Ping) The TCP ACK ping is quite similar to the just-discussed SYN ping. The difference, as you could likely guess, is that the TCP ACK flag is set instead of the SYN flag. Such an ACK packet purports to be acknowledg- ing data over an established TCP connection, but no such connection ex- ists. So remote hosts should always respond with a RST packet, disclos- ing their existence in the process. The -PA option uses the same default port as the SYN probe (80) and can also take a list of destination ports in the same format. If an unpriv- ileged user tries this, or an IPv6 target is specified, the connect() workaround discussed previously is used. This workaround is imperfect because connect() is actually sending a SYN packet rather than an ACK. The reason for offering both SYN and ACK ping probes is to maximize the chances of bypassing firewalls. Many administrators configure routers and other simple firewalls to block incoming SYN packets except for those destined for public services like the company web site or mail server. This prevents other incoming connections to the organization, while allowing users to make unobstructed outgoing connections to the Internet. This non-stateful approach takes up few resources on the firewall/router and is widely supported by hardware and software fil- ters. The Linux Netfilter/iptables firewall software offers the --syn convenience option to implement this stateless approach. When stateless firewall rules such as this are in place, SYN ping probes (-PS) are likely to be blocked when sent to closed target ports. In such cases, the ACK probe shines as it cuts right through these rules. Another common type of firewall uses stateful rules that drop unex- pected packets. This feature was initially found mostly on high-end firewalls, though it has become much more common over the years. The Linux Netfilter/iptables system supports this through the --state op- tion, which categorizes packets based on connection state. A SYN probe is more likely to work against such a system, as unexpected ACK packets are generally recognized as bogus and dropped. A solution to this quandary is to send both SYN and ACK probes by specifying -PS and -PA. -PU [portlist] (UDP Ping) Another host discovery option is the UDP ping, which sends an empty (unless --data-length is specified) UDP packet to the given ports. The portlist takes the same format as with the previously discussed -PS and -PA options. If no ports are specified, the default is 31338. This de- fault can be configured at compile-time by changing DE- FAULT_UDP_PROBE_PORT_SPEC in nmap.h. A highly uncommon port is used by default because sending to open ports is often undesirable for this particular scan type. Upon hitting a closed port on the target machine, the UDP probe should elicit an ICMP port unreachable packet in return. This signifies to Nmap that the machine is up and available. Many other types of ICMP er- rors, such as host/network unreachables or TTL exceeded are indicative of a down or unreachable host. A lack of response is also interpreted this way. If an open port is reached, most services simply ignore the empty packet and fail to return any response. This is why the default probe port is 31338, which is highly unlikely to be in use. A few ser- vices, such as chargen, will respond to an empty UDP packet, and thus disclose to Nmap that the machine is available. The primary advantage of this scan type is that it bypasses firewalls and filters that only screen TCP. For example, I once owned a Linksys BEFW11S4 wireless broadband router. The external interface of this de- vice filtered all TCP ports by default, but UDP probes would still elicit port unreachable messages and thus give away the device. -PE; -PP; -PM (ICMP Ping Types) In addition to the unusual TCP and UDP host discovery types discussed previously, Nmap can send the standard packets sent by the ubiquitous ping program. Nmap sends an ICMP type 8 (echo request) packet to the target IP addresses, expecting a type 0 (echo reply) in return from available hosts. Unfortunately for network explorers, many hosts and firewalls now block these packets, rather than responding as required by RFC 1122[1]. For this reason, ICMP-only scans are rarely reliable enough against unknown targets over the Internet. But for system admin- istrators monitoring an internal network, they can be a practical and efficient approach. Use the -PE option to enable this echo request be- havior. While echo request is the standard ICMP ping query, Nmap does not stop there. The ICMP standard (RFC 792[2]) also specifies timestamp request, information request, and address mask request packets as codes 13, 15, and 17, respectively. While the ostensible purpose for these queries is to learn information such as address masks and current times, they can easily be used for host discovery. A system that replies is up and available. Nmap does not currently implement information request pack- ets, as they are not widely supported. RFC 1122 insists that "a host SHOULD NOT implement these messages". Timestamp and address mask queries can be sent with the -PP and -PM options, respectively. A time- stamp reply (ICMP code 14) or address mask reply (code 18) discloses that the host is available. These two queries can be valuable when ad- ministrators specifically block echo request packets while forgetting that other ICMP queries can be used for the same purpose. -PO [protolist] (IP Protocol Ping) The newest host discovery option is the IP protocol ping, which sends IP packets with the specified protocol number set in their IP header. The protocol list takes the same format as do port lists in the previ- ously discussed TCP and UDP host discovery options. If no protocols are specified, the default is to send multiple IP packets for ICMP (proto- col 1), IGMP (protocol 2), and IP-in-IP (protocol 4). The default pro- tocols can be configured at compile-time by changing DE- FAULT_PROTO_PROBE_PORT_SPEC in nmap.h. Note that for the ICMP, IGMP, TCP (protocol 6), and UDP (protocol 17), the packets are sent with the proper protocol headers while other protocols are sent with no addi- tional data beyond the IP header (unless the --data-length option is specified). This host discovery method looks for either responses using the same protocol as a probe, or ICMP protocol unreachable messages which sig- nify that the given protocol isn't supported on the destination host. Either type of response signifies that the target host is alive. -PR (ARP Ping) One of the most common Nmap usage scenarios is to scan an ethernet LAN. On most LANs, especially those using private address ranges specified by RFC 1918[3], the vast majority of IP addresses are unused at any given time. When Nmap tries to send a raw IP packet such as an ICMP echo request, the operating system must determine the destination hard- ware (ARP) address corresponding to the target IP so that it can prop- erly address the ethernet frame. This is often slow and problematic, since operating systems weren't written with the expectation that they would need to do millions of ARP requests against unavailable hosts in a short time period. ARP scan puts Nmap and its optimized algorithms in charge of ARP re- quests. And if it gets a response back, Nmap doesn't even need to worry about the IP-based ping packets since it already knows the host is up. This makes ARP scan much faster and more reliable than IP-based scans. So it is done by default when scanning ethernet hosts that Nmap detects are on a local ethernet network. Even if different ping types (such as -PE or -PS) are specified, Nmap uses ARP instead for any of the targets which are on the same LAN. If you absolutely don't want to do an ARP scan, specify --send-ip. --traceroute (Trace path to host) Traceroutes are performed post-scan using information from the scan re- sults to determine the port and protocol most likely to reach the tar- get. It works with all scan types except connect scans (-sT) and idle scans (-sI). All traces use Nmap's dynamic timing model and are per- formed in parallel. Traceroute works by sending packets with a low TTL (time-to-live) in an attempt to elicit ICMP Time Exceeded messages from intermediate hops between the scanner and the target host. Standard traceroute implemen- tation start with a TTL of 1 and increment the TTL until the destina- tion host is reached. Nmap's traceroute starts with a high TTL and then decrements the TTL until it reaches 0. Doing it backwards lets nmap em- ploy clever caching algorithms to speed up traces over multiple hosts. On average nmap sends 5-10 fewer packets per host, depending on network conditions. If a single subnet is being scanned (i.e. 192.168.0.0/24) nmap may only have to send a single packet to most hosts. --reason (Host and port state reasons) Shows the reason each port is set to a specific state and the reason each host is up or down. This option displays the type of the packet that determined a port or hosts state. For example, A RST packet from a closed port or an echo reply from an alive host. The information Nmap can provide is determined by the type of scan or ping. The SYN scan and SYN ping (-sS and -PT) are very detailed, but the TCP connect scan and ping (-sT) are limited by the implementation of the connect system call. This feature is automatically enabled by the debug option (-d) and the results are stored in XML log files even if this option is not specified. -n (No DNS resolution) Tells Nmap to never do reverse DNS resolution on the active IP ad- dresses it finds. Since DNS can be slow even with Nmap's built-in par- allel stub resolver, this option can slash scanning times. -R (DNS resolution for all targets) Tells Nmap to always do reverse DNS resolution on the target IP ad- dresses. Normally reverse DNS is only performed against responsive (on- line) hosts. --system-dns (Use system DNS resolver) By default, Nmap resolves IP addresses by sending queries directly to the name servers configured on your host and then listening for re- sponses. Many requests (often dozens) are performed in parallel to im- prove performance. Specify this option to use your system resolver in- stead (one IP at a time via the getnameinfo() call). This is slower and rarely useful unless you find a bug in the Nmap parallel resolver (please let us know if you do). The system resolver is always used for IPv6 scans. --dns-servers <server1[,server2],...> (Servers to use for reverse DNS queries) By default Nmap will try to determine your DNS servers (for rDNS reso- lution) from your resolv.conf file (Unix) or the Registry (Win32). Al- ternatively, you may use this option to specify alternate servers. This option is not honored if you are using --system-dns or an IPv6 scan. Using multiple DNS servers is often faster, especially if you choose authoritative servers for your target IP space. This option can also improve stealth, as your requests can be bounced off just about any re- cursive DNS server on the internet. This option also comes in handy when scanning private networks. Some- times only a few name servers provide proper rDNS information, and you may not even know where they are. You can scan the network for port 53 (perhaps with version detection), then try Nmap list scans (-sL) speci- fying each name server one at a time with --dns-servers until you find one which works. PORT SCANNING BASICS While Nmap has grown in functionality over the years, it began as an effi- cient port scanner, and that remains its core function. The simple command nmap target scans more than 1660 TCP ports on the host target. While many port scanners have traditionally lumped all ports into the open or closed states, Nmap is much more granular. It divides ports into six states: open, closed, filtered, unfiltered, open|filtered, or closed|filtered. These states are not intrinsic properties of the port itself, but describe how Nmap sees them. For example, an Nmap scan from the same network as the target may show port 135/tcp as open, while a scan at the same time with the same options from across the Internet might show that port as filtered. The six port states recognized by Nmap open An application is actively accepting TCP connections or UDP packets on this port. Finding these is often the primary goal of port scanning. Security-minded people know that each open port is an avenue for at- tack. Attackers and pen-testers want to exploit the open ports, while administrators try to close or protect them with firewalls without thwarting legitimate users. Open ports are also interesting for non-se- curity scans because they show services available for use on the net- work. closed A closed port is accessible (it receives and responds to Nmap probe packets), but there is no application listening on it. They can be helpful in showing that a host is up on an IP address (host discovery, or ping scanning), and as part of OS detection. Because closed ports are reachable, it may be worth scanning later in case some open up. Ad- ministrators may want to consider blocking such ports with a firewall. Then they would appear in the filtered state, discussed next. filtered Nmap cannot determine whether the port is open because packet filtering prevents its probes from reaching the port. The filtering could be from a dedicated firewall device, router rules, or host-based firewall soft- ware. These ports frustrate attackers because they provide so little information. Sometimes they respond with ICMP error messages such as type 3 code 13 (destination unreachable: communication administratively prohibited), but filters that simply drop probes without responding are far more common. This forces Nmap to retry several times just in case the probe was dropped due to network congestion rather than filtering. This slows down the scan dramatically. unfiltered The unfiltered state means that a port is accessible, but Nmap is un- able to determine whether it is open or closed. Only the ACK scan, which is used to map firewall rulesets, classifies ports into this state. Scanning unfiltered ports with other scan types such as Window scan, SYN scan, or FIN scan, may help resolve whether the port is open. open|filtered Nmap places ports in this state when it is unable to determine whether a port is open or filtered. This occurs for scan types in which open ports give no response. The lack of response could also mean that a packet filter dropped the probe or any response it elicited. So Nmap does not know for sure whether the port is open or being filtered. The UDP, IP protocol, FIN, null, and Xmas scans classify ports this way. closed|filtered This state is used when Nmap is unable to determine whether a port is closed or filtered. It is only used for the IP ID idle scan. PORT SCANNING TECHNIQUES As a novice performing automotive repair, I can struggle for hours trying to fit my rudimentary tools (hammer, duct tape, wrench, etc.) to the task at hand. When I fail miserably and tow my jalopy to a real mechanic, he in- variably fishes around in a huge tool chest until pulling out the perfect gizmo which makes the job seem effortless. The art of port scanning is sim- ilar. Experts understand the dozens of scan techniques and choose the ap- propriate one (or combination) for a given task. Inexperienced users and script kiddies, on the other hand, try to solve every problem with the de- fault SYN scan. Since Nmap is free, the only barrier to port scanning mas- tery is knowledge. That certainly beats the automotive world, where it may take great skill to determine that you need a strut spring compressor, then you still have to pay thousands of dollars for it. Most of the scan types are only available to privileged users. This is be- cause they send and receive raw packets, which requires root access on Unix systems. Using an administrator account on Windows is recommended, though Nmap sometimes works for unprivileged users on that platform when WinPcap has already been loaded into the OS. Requiring root privileges was a seri- ous limitation when Nmap was released in 1997, as many users only had ac- cess to shared shell accounts. Now, the world is different. Computers are cheaper, far more people have always-on direct Internet access, and desktop Unix systems (including Linux and Mac OS X) are prevalent. A Windows ver- sion of Nmap is now available, allowing it to run on even more desktops. For all these reasons, users have less need to run Nmap from limited shared shell accounts. This is fortunate, as the privileged options make Nmap far more powerful and flexible. While Nmap attempts to produce accurate results, keep in mind that all of its insights are based on packets returned by the target machines (or fire- walls in front of them). Such hosts may be untrustworthy and send responses intended to confuse or mislead Nmap. Much more common are non-RFC-compliant hosts that do not respond as they should to Nmap probes. FIN, null, and Xmas scans are particularly susceptible to this problem. Such issues are specific to certain scan types and so are discussed in the individual scan type entries. This section documents the dozen or so port scan techniques supported by Nmap. Only one method may be used at a time, except that UDP scan (-sU) may be combined with any one of the TCP scan types. As a memory aid, port scan type options are of the form -sC, where C is a prominent character in the scan name, usually the first. The one exception to this is the deprecated FTP bounce scan (-b). By default, Nmap performs a SYN Scan, though it sub- stitutes a connect scan if the user does not have proper privileges to send raw packets (requires root access on Unix) or if IPv6 targets were speci- fied. Of the scans listed in this section, unprivileged users can only exe- cute connect and FTP bounce scans. -sS (TCP SYN scan) SYN scan is the default and most popular scan option for good reasons. It can be performed quickly, scanning thousands of ports per second on a fast network not hampered by restrictive firewalls. SYN scan is rela- tively unobtrusive and stealthy, since it never completes TCP connec- tions. It also works against any compliant TCP stack rather than de- pending on idiosyncrasies of specific platforms as Nmap's FIN/null/Xmas, Maimon and idle scans do. It also allows clear, reliable differentiation between the open, closed, and filtered states. This technique is often referred to as half-open scanning, because you don't open a full TCP connection. You send a SYN packet, as if you are going to open a real connection and then wait for a response. A SYN/ACK indicates the port is listening (open), while a RST (reset) is indica- tive of a non-listener. If no response is received after several re- transmissions, the port is marked as filtered. The port is also marked filtered if an ICMP unreachable error (type 3, code 1,2, 3, 9, 10, or 13) is received. -sT (TCP connect scan) TCP connect scan is the default TCP scan type when SYN scan is not an option. This is the case when a user does not have raw packet privi- leges or is scanning IPv6 networks. Instead of writing raw packets as most other scan types do, Nmap asks the underlying operating system to establish a connection with the target machine and port by issuing the connect() system call. This is the same high-level system call that web browsers, P2P clients, and most other network-enabled applications use to establish a connection. It is part of a programming interface known as the Berkeley Sockets API. Rather than read raw packet responses off the wire, Nmap uses this API to obtain status information on each con- nection attempt. When SYN scan is available, it is usually a better choice. Nmap has less control over the high level connect() call than with raw packets, making it less efficient. The system call completes connections to open target ports rather than performing the half-open reset that SYN scan does. Not only does this take longer and require more packets to obtain the same information, but target machines are more likely to log the connection. A decent IDS will catch either, but most machines have no such alarm system. Many services on your average Unix system will add a note to syslog, and sometimes a cryptic error message, when Nmap con- nects and then closes the connection without sending data. Truly pa- thetic services crash when this happens, though that is uncommon. An administrator who sees a bunch of connection attempts in her logs from a single system should know that she has been connect scanned. -sU (UDP scans) While most popular services on the Internet run over the TCP protocol, UDP[4] services are widely deployed. DNS, SNMP, and DHCP (registered ports 53, 161/162, and 67/68) are three of the most common. Because UDP scanning is generally slower and more difficult than TCP, some security auditors ignore these ports. This is a mistake, as exploitable UDP ser- vices are quite common and attackers certainly don't ignore the whole protocol. Fortunately, Nmap can help inventory UDP ports. UDP scan is activated with the -sU option. It can be combined with a TCP scan type such as SYN scan (-sS) to check both protocols during the same run. UDP scan works by sending an empty (no data) UDP header to every tar- geted port. If an ICMP port unreachable error (type 3, code 3) is re- turned, the port is closed. Other ICMP unreachable errors (type 3, codes 1, 2, 9, 10, or 13) mark the port as filtered. Occasionally, a service will respond with a UDP packet, proving that it is open. If no response is received after retransmissions, the port is classified as open|filtered. This means that the port could be open, or perhaps packet filters are blocking the communication. Versions scan (-sV) can be used to help differentiate the truly open ports from the filtered ones. A big challenge with UDP scanning is doing it quickly. Open and fil- tered ports rarely send any response, leaving Nmap to time out and then conduct retransmissions just in case the probe or response were lost. Closed ports are often an even bigger problem. They usually send back an ICMP port unreachable error. But unlike the RST packets sent by closed TCP ports in response to a SYN or connect scan, many hosts rate limit ICMP port unreachable messages by default. Linux and Solaris are particularly strict about this. For example, the Linux 2.4.20 kernel limits destination unreachable messages to one per second (in net/ipv4/icmp.c). Nmap detects rate limiting and slows down accordingly to avoid flooding the network with useless packets that the target machine will drop. Un- fortunately, a Linux-style limit of one packet per second makes a 65,536-port scan take more than 18 hours. Ideas for speeding your UDP scans up include scanning more hosts in parallel, doing a quick scan of just the popular ports first, scanning from behind the firewall, and using --host-timeout to skip slow hosts. -sN; -sF; -sX (TCP Null, FIN, and Xmas scans) These three scan types (even more are possible with the --scanflags op- tion described in the next section) exploit a subtle loophole in the TCP RFC[5] to differentiate between open and closed ports. Page 65 says that "if the [destination] port state is CLOSED .... an incoming seg- ment not containing a RST causes a RST to be sent in response." Then the next page discusses packets sent to open ports without the SYN, RST, or ACK bits set, stating that: "you are unlikely to get here, but if you do, drop the segment, and return." When scanning systems compliant with this RFC text, any packet not con- taining SYN, RST, or ACK bits will result in a returned RST if the port is closed and no response at all if the port is open. As long as none of those three bits are included, any combination of the other three (FIN, PSH, and URG) are OK. Nmap exploits this with three scan types: Null scan (-sN) Does not set any bits (TCP flag header is 0) FIN scan (-sF) Sets just the TCP FIN bit. Xmas scan (-sX) Sets the FIN, PSH, and URG flags, lighting the packet up like a Christmas tree. These three scan types are exactly the same in behavior except for the TCP flags set in probe packets. If a RST packet is received, the port is considered closed, while no response means it is open|filtered. The port is marked filtered if an ICMP unreachable error (type 3, code 1, 2, 3, 9, 10, or 13) is received. The key advantage to these scan types is that they can sneak through certain non-stateful firewalls and packet filtering routers. Another advantage is that these scan types are a little more stealthy than even a SYN scan. Don't count on this though--most modern IDS products can be configured to detect them. The big downside is that not all systems follow RFC 793 to the letter. A number of systems send RST responses to the probes regardless of whether the port is open or not. This causes all of the ports to be labeled closed. Major operating systems that do this are Microsoft Windows, many Cisco devices, BSDI, and IBM OS/400. This scan does work against most Unix-based systems though. Another downside of these scans is that they can't distinguish open ports from certain filtered ones, leaving you with the response open|filtered. -sA (TCP ACK scan) This scan is different than the others discussed so far in that it never determines open (or even open|filtered) ports. It is used to map out firewall rulesets, determining whether they are stateful or not and which ports are filtered. The ACK scan probe packet has only the ACK flag set (unless you use --scanflags). When scanning unfiltered systems, open and closed ports will both return a RST packet. Nmap then labels them as unfiltered, meaning that they are reachable by the ACK packet, but whether they are open or closed is undetermined. Ports that don't respond, or send cer- tain ICMP error messages back (type 3, code 1, 2, 3, 9, 10, or 13), are labeled filtered. -sW (TCP Window scan) Window scan is exactly the same as ACK scan except that it exploits an implementation detail of certain systems to differentiate open ports from closed ones, rather than always printing unfiltered when a RST is returned. It does this by examining the TCP Window field of the RST packets returned. On some systems, open ports use a positive window size (even for RST packets) while closed ones have a zero window. So instead of always listing a port as unfiltered when it receives a RST back, Window scan lists the port as open or closed if the TCP Window value in that reset is positive or zero, respectively. This scan relies on an implementation detail of a minority of systems out on the Internet, so you can't always trust it. Systems that don't support it will usually return all ports closed. Of course, it is pos- sible that the machine really has no open ports. If most scanned ports are closed but a few common port numbers (such as 22, 25, 53) are fil- tered, the system is most likely susceptible. Occasionally, systems will even show the exact opposite behavior. If your scan shows 1000 open ports and 3 closed or filtered ports, then those three may very well be the truly open ones. -sM (TCP Maimon scan) The Maimon scan is named after its discoverer, Uriel Maimon. He de- scribed the technique in Phrack Magazine issue #49 (November 1996). Nmap, which included this technique, was released two issues later. This technique is exactly the same as null, FIN, and Xmas scans, except that the probe is FIN/ACK. According to RFC 793[5] (TCP), a RST packet should be generated in response to such a probe whether the port is open or closed. However, Uriel noticed that many BSD-derived systems simply drop the packet if the port is open. --scanflags (Custom TCP scan) Truly advanced Nmap users need not limit themselves to the canned scan types offered. The --scanflags option allows you to design your own scan by specifying arbitrary TCP flags. Let your creative juices flow, while evading intrusion detection systems whose vendors simply paged through the Nmap man page adding specific rules! The --scanflags argument can be a numerical flag value such as 9 (PSH and FIN), but using symbolic names is easier. Just mash together any combination of URG, ACK, PSH, RST, SYN, and FIN. For example, --scan- flags URGACKPSHRSTSYNFIN sets everything, though it's not very useful for scanning. The order these are specified in is irrelevant. In addition to specifying the desired flags, you can specify a TCP scan type (such as -sA or -sF). That base type tells Nmap how to interpret responses. For example, a SYN scan considers no-response to indicate a filtered port, while a FIN scan treats the same as open|filtered. Nmap will behave the same way it does for the base scan type, except that it will use the TCP flags you specify instead. If you don't specify a base type, SYN scan is used. -sI <zombie host[:probeport]> (idle scan) This advanced scan method allows for a truly blind TCP port scan of the target (meaning no packets are sent to the target from your real IP ad- dress). Instead, a unique side-channel attack exploits predictable IP fragmentation ID sequence generation on the zombie host to glean infor- mation about the open ports on the target. IDS systems will display the scan as coming from the zombie machine you specify (which must be up and meet certain criteria). This fascinating scan type is too complex to fully describe in this reference guide, so I wrote and posted an in- formal paper with full details at http://nmap.org/book/idlescan.html. Besides being extraordinarily stealthy (due to its blind nature), this scan type permits mapping out IP-based trust relationships between ma- chines. The port listing shows open ports from the perspective of the zombie host. So you can try scanning a target using various zombies that you think might be trusted (via router/packet filter rules). You can add a colon followed by a port number to the zombie host if you wish to probe a particular port on the zombie for IP ID changes. Other- wise Nmap will use the port it uses by default for TCP pings (80). -sO (IP protocol scan) IP protocol scan allows you to determine which IP protocols (TCP, ICMP, IGMP, etc.) are supported by target machines. This isn't technically a port scan, since it cycles through IP protocol numbers rather than TCP or UDP port numbers. Yet it still uses the -p option to select scanned protocol numbers, reports its results within the normal port table for- mat, and even uses the same underlying scan engine as the true port scanning methods. So it is close enough to a port scan that it belongs here. Besides being useful in its own right, protocol scan demonstrates the power of open source software. While the fundamental idea is pretty simple, I had not thought to add it nor received any requests for such functionality. Then in the summer of 2000, Gerhard Rieger conceived the idea, wrote an excellent patch implementing it, and sent it to the nmap-hackers mailing list. I incorporated that patch into the Nmap tree and released a new version the next day. Few pieces of commercial soft- ware have users enthusiastic enough to design and contribute their own improvements! Protocol scan works in a similar fashion to UDP scan. Instead of iter- ating through the port number field of a UDP packet, it sends IP packet headers and iterates through the 8-bit IP protocol field. The headers are usually empty, containing no data and not even the proper header for the claimed protocol. The three exceptions are TCP, UDP, and ICMP. A proper protocol header for those is included since some systems won't send them otherwise and because Nmap already has functions to create them. Instead of watching for ICMP port unreachable messages, protocol scan is on the lookout for ICMP protocol unreachable messages. If Nmap receives any response in any protocol from the target host, Nmap marks that protocol as open. An ICMP protocol unreachable error (type 3, code 2) causes the protocol to be marked as closed Other ICMP unreachable errors (type 3, code 1, 3, 9, 10, or 13) cause the protocol to be marked filtered (though they prove that ICMP is open at the same time). If no response is received after retransmissions, the protocol is marked open|filtered -b <FTP relay host> (FTP bounce scan) An interesting feature of the FTP protocol (RFC 959[6]) is support for so-called proxy FTP connections. This allows a user to connect to one FTP server, then ask that files be sent to a third-party server. Such a feature is ripe for abuse on many levels, so most servers have ceased supporting it. One of the abuses this feature allows is causing the FTP server to port scan other hosts. Simply ask the FTP server to send a file to each interesting port of a target host in turn. The error mes- sage will describe whether the port is open or not. This is a good way to bypass firewalls because organizational FTP servers are often placed where they have more access to other internal hosts than any old Inter- net host would. Nmap supports FTP bounce scan with the -b option. It takes an argument of the form username:password@server:port. Server is the name or IP address of a vulnerable FTP server. As with a normal URL, you may omit username:password, in which case anonymous login cre- dentials (user: anonymous password:-wwwuser@) are used. The port number (and preceding colon) may be omitted as well, in which case the default FTP port (21) on server is used. This vulnerability was widespread in 1997 when Nmap was released, but has largely been fixed. Vulnerable servers are still around, so it is worth trying when all else fails. If bypassing a firewall is your goal, scan the target network for open port 21 (or even for any FTP services if you scan all ports with version detection), then try a bounce scan using each. Nmap will tell you whether the host is vulnerable or not. If you are just trying to cover your tracks, you don't need to (and, in fact, shouldn't) limit yourself to hosts on the target network. Before you go scanning random Internet addresses for vulnerable FTP servers, consider that sysadmins may not appreciate you abusing their servers in this way. PORT SPECIFICATION AND SCAN ORDER In addition to all of the scan methods discussed previously, Nmap offers options for specifying which ports are scanned and whether the scan order is randomized or sequential. By default, Nmap scans all ports up to and in- cluding 1024 as well as higher numbered ports listed in the nmap-services file for the protocol(s) being scanned. -p <port ranges> (Only scan specified ports) This option specifies which ports you want to scan and overrides the default. Individual port numbers are OK, as are ranges separated by a hyphen (e.g. 1-1023). The beginning and/or end values of a range may be omitted, causing Nmap to use 1 and 65535, respectively. So you can specify -p- to scan ports from 1 through 65535. Scanning port zero is allowed if you specify it explicitly. For IP protocol scanning (-sO), this option specifies the protocol numbers you wish to scan for (0-255). When scanning both TCP and UDP ports, you can specify a particular pro- tocol by preceding the port numbers by T: or U:. The qualifier lasts until you specify another qualifier. For example, the argument -p U:53,111,137,T:21-25,80,139,8080 would scan UDP ports 53,111,and 137, as well as the listed TCP ports. Note that to scan both UDP & TCP, you have to specify -sU and at least one TCP scan type (such as -sS, -sF, or -sT). If no protocol qualifier is given, the port numbers are added to all protocol lists. Ports can also be specified by name according to what the port is re- ferred to in the nmap-services. You can even use the wildcards * and ? with the names. For example, to scan FTP and all ports whose names be- gin with http, use -p ftp,http*. Be careful about shell expansions and quote the argument to -p if unsure. Ranges of ports can be surrounded by square brackets to indicate ports inside that range that appear in nmap-services. For example, the fol- lowing will scan all ports in nmap-services equal to or below 1024: -p [-1024]. Be careful with shell expansions and quote the argument to -p if unsure. -F (Fast (limited port) scan) Specifies that you only wish to scan for ports listed in the nmap-ser- vices file which comes with nmap (or the protocols file for -sO). This is much faster than scanning all 65535 ports on a host. Because this list contains so many TCP ports (more than 1200), the speed difference from a default TCP scan (about 1650 ports) isn't dramatic. The differ- ence can be enormous if you specify your own tiny nmap-services file using the --servicedb or --datadir options. -r (Don't randomize ports) By default, Nmap randomizes the scanned port order (except that certain commonly accessible ports are moved near the beginning for efficiency reasons). This randomization is normally desirable, but you can specify -r for sequential port scanning instead. SERVICE AND VERSION DETECTION Point Nmap at a remote machine and it might tell you that ports 25/tcp, 80/tcp, and 53/udp are open. Using its nmap-services database of about 2,200 well-known services, Nmap would report that those ports probably cor- respond to a mail server (SMTP), web server (HTTP), and name server (DNS) respectively. This lookup is usually accurate--the vast majority of daemons listening on TCP port 25 are, in fact, mail servers. However, you should not bet your security on this! People can and do run services on strange ports. Even if Nmap is right, and the hypothetical server above is running SMTP, HTTP, and DNS servers, that is not a lot of information. When doing vulner- ability assessments (or even simple network inventories) of your companies or clients, you really want to know which mail and DNS servers and versions are running. Having an accurate version number helps dramatically in deter- mining which exploits a server is vulnerable to. Version detection helps you obtain this information. After TCP and/or UDP ports are discovered using one of the other scan meth- ods, version detection interrogates those ports to determine more about what is actually running. The nmap-service-probes database contains probes for querying various services and match expressions to recognize and parse responses. Nmap tries to determine the service protocol (e.g. FTP, SSH, telnet, HTTP), the application name (e.g. ISC BIND, Apache httpd, Solaris telnetd), the version number, hostname, device type (e.g. printer, router), the OS family (e.g. Windows, Linux) and sometimes miscellaneous details like whether an X server is open to connections, the SSH protocol version, or the KaZaA user name). Of course, most services don't provide all of this information. If Nmap was compiled with OpenSSL support, it will connect to SSL servers to deduce the service listening behind that encryption layer. When RPC services are discovered, the Nmap RPC grinder (-sR) is automati- cally used to determine the RPC program and version numbers. Some UDP ports are left in the open|filtered state after a UDP port scan is unable to de- termine whether the port is open or filtered. Version detection will try to elicit a response from these ports (just as it does with open ports), and change the state to open if it succeeds. open|filtered TCP ports are treated the same way. Note that the Nmap -A option enables version detec- tion among other things. A paper documenting the workings, usage, and cus- tomization of version detection is available at http://nmap.org/book/vscan.html. When Nmap receives responses from a service but cannot match them to its database, it prints out a special fingerprint and a URL for you to submit if to if you know for sure what is running on the port. Please take a cou- ple minutes to make the submission so that your find can benefit everyone. Thanks to these submissions, Nmap has about 3,000 pattern matches for more than 350 protocols such as SMTP, FTP, HTTP, etc. Version detection is enabled and controlled with the following options: -sV (Version detection) Enables version detection, as discussed above. Alternatively, you can use -A, which enables version detection among other things. --allports (Don't exclude any ports from version detection) By default, Nmap version detection skips TCP port 9100 because some printers simply print anything sent to that port, leading to dozens of pages of HTTP GET requests, binary SSL session requests, etc. This be- havior can be changed by modifying or removing the Exclude directive in nmap-service-probes, or you can specify --allports to scan all ports regardless of any Exclude directive. --version-intensity <intensity> (Set version scan intensity) When performing a version scan (-sV), nmap sends a series of probes, each of which is assigned a rarity value between 1 and 9. The lower-numbered probes are effective against a wide variety of common services, while the higher numbered ones are rarely useful. The inten- sity level specifies which probes should be applied. The higher the number, the more likely it is the service will be correctly identified. However, high intensity scans take longer. The intensity must be be- tween 0 and 9. The default is 7. When a probe is registered to the tar- get port via the nmap-service-probes ports directive, that probe is tried regardless of intensity level. This ensures that the DNS probes will always be attempted against any open port 53, the SSL probe will be done against 443, etc. --version-light (Enable light mode) This is a convenience alias for --version-intensity 2. This light mode makes version scanning much faster, but it is slightly less likely to identify services. --version-all (Try every single probe) An alias for --version-intensity 9, ensuring that every single probe is attempted against each port. --version-trace (Trace version scan activity) This causes Nmap to print out extensive debugging info about what ver- sion scanning is doing. It is a subset of what you get with --packet-trace. -sR (RPC scan) This method works in conjunction with the various port scan methods of Nmap. It takes all the TCP/UDP ports found open and floods them with SunRPC program NULL commands in an attempt to determine whether they are RPC ports, and if so, what program and version number they serve up. Thus you can effectively obtain the same info as rpcinfo -p even if the target's portmapper is behind a firewall (or protected by TCP wrap- pers). Decoys do not currently work with RPC scan. This is automati- cally enabled as part of version scan (-sV) if you request that. As version detection includes this and is much more comprehensive, -sR is rarely needed. OS DETECTION One of Nmap's best-known features is remote OS detection using TCP/IP stack fingerprinting. Nmap sends a series of TCP and UDP packets to the remote host and examines practically every bit in the responses. After performing dozens of tests such as TCP ISN sampling, TCP options support and ordering, IP ID sampling, and the initial window size check, Nmap compares the re- sults to its nmap-os-db database of more than 800 known OS fingerprints and prints out the OS details if there is a match. Each fingerprint includes a freeform textual description of the OS, and a classification which provides the vendor name (e.g. Sun), underlying OS (e.g. Solaris), OS generation (e.g. 10), and device type (general purpose, router, switch, game console, etc). If Nmap is unable to guess the OS of a machine, and conditions are good (e.g. at least one open port and one closed port were found), Nmap will provide a URL you can use to submit the fingerprint if you know (for sure) the OS running on the machine. By doing this you contribute to the pool of operating systems known to Nmap and thus it will be more accurate for everyone. OS detection enables several other tests which make use of information that is gathered during the process anyway. One of these is uptime measurement, which uses the TCP timestamp option (RFC 1323[7]) to guess when a machine was last rebooted. This is only reported for machines which provide this information. Another is TCP Sequence Predictability Classification. This measures approximately how hard it is to establish a forged TCP connection against the remote host. It is useful for exploiting source-IP based trust relationships (rlogin, firewall filters, etc) or for hiding the source of an attack. This sort of spoofing is rarely performed any more, but many ma- chines are still vulnerable to it. The actual difficulty number is based on statistical sampling and may fluctuate. It is generally better to use the English classification such as "worthy challenge" or "trivial joke". This is only reported in normal output in verbose (-v) mode. When verbose mode is enabled along with -O, IP ID sequence generation is also reported. Most machines are in the "incremental" class, which means that they increment the ID field in the IP header for each packet they send. This makes them vulnerable to several advanced information gathering and spoofing attacks. A paper documenting the workings, usage, and customization of OS detection is available at http://nmap.org/book/osdetect.html. OS detection is enabled and controlled with the following options: -O (Enable OS detection) Enables OS detection, as discussed above. Alternatively, you can use -A to enable OS detection along with other things. --osscan-limit (Limit OS detection to promising targets) OS detection is far more effective if at least one open and one closed TCP port are found. Set this option and Nmap will not even try OS de- tection against hosts that do not meet this criteria. This can save substantial time, particularly on -PN scans against many hosts. It only matters when OS detection is requested with -O or -A. --osscan-guess; --fuzzy (Guess OS detection results) When Nmap is unable to detect a perfect OS match, it sometimes offers up near-matches as possibilities. The match has to be very close for Nmap to do this by default. Either of these (equivalent) options make Nmap guess more aggressively. Nmap will still tell you when an imper- fect match is printed and display its confidence level (percentage) for each guess. --max-os-tries (Set the maximum number of OS detection tries against a tar- get) When Nmap performs OS detection against a target and fails to find a perfect match, it usually repeats the attempt. By default, Nmap tries five times if conditions are favorable for OS fingerprint submission, and twice when conditions aren't so good. Specifying a lower --max-os-tries value (such as 1) speeds Nmap up, though you miss out on retries which could potentially identify the OS. Alternatively, a high value may be set to allow even more retries when conditions are favor- able. This is rarely done, except to generate better fingerprints for submission and integration into the Nmap OS database. NMAP SCRIPTING ENGINE (NSE) The Nmap Scripting Engine (NSE) combines the efficiency of Nmap's network handling with the versatility of the lightweight scripting language Lua[8], thus providing innumerable opportunities. A more extensive documentation of the NSE (including its API) can be found at http://nmap.org/book/nse.html. The target of the NSE is to provide Nmap with a flexible infrastructure for extending its capabilities and offering its users a simple way of creating customized tests. Uses for the NSE include (but definitely are not limited to): Enhanced version detection (category version)--While Nmap already offers its Service and Version detection system, which is unmatched in terms of efficiency and scope, this power has its downside when it comes to services requiring more complex probes. The Skype-Protocol version 2 for instance can be identified by sending 2 independent probes to it, which the built-in system is not laid out for: a simple NSE-script can do the job and update the port's service information. Malware-detection (category malware)--Both attackers and worms often leave backdoors--be it in form of SMTP-servers listening on uncommon ports mostly used by spammers for mail relay, or in form of an FTP-server giving crack- ers access to critical data. A few lines of Lua code can help to identify those loopholes easily. Vulnerability Detection (category vuln)--NSE's capacity in detecting risks ranges from testing whether an SMTP server supports relaying mail from ar- bitrary domains to testing whether an HTTP server is vulnerable to direc- tory traversal attacks. Determination of Authentication Credentials (category auth)--NSE can be used for determining authentication credentials on the target's services, with a common method being brute-force attack. Network Discovery and Information Gathering (categories safe, intrusive and discovery)--By providing you with a scripting language and a really effi- cient asynchronous network API on the one hand and the information gathered during earlier stages of a scan on the other hand the NSE is suited to write client programs for the services listening on a target machine. These clients may collect information like: listings of available NFS/SMB/RPC shares, the number of channels of an irc-network or currently logged on users. To reflect those different uses and to simplify the choice of which scripts to run, each script contains a field associating it with one or more of the above mentioned categories. To maintain the matching from scripts to cate- gories a file called script.db is installed along with the distributed scripts. Therefore, if you, for example, want to see if a machine is in- fected by any worm Nmap provides a script for you can simply run nmap --script=malware target-ip and check the output afterwards. The version scripts are always run implicitly when a script-scan is requested. The script.db is a Lua-script itself and can be updated through the --script-updatedb option. A NSE-script basically is a chunk of Lua-code which has (among some infor- mational fields, like name, id and categories) 2 functions: a test whether the particular script should be run against a certain host or port (called a hostrule or portrule respectively) and an action to be carried out if the test returns true. Scripts have access to most information gathered by Nmap during earlier stages. For each host this includes the IP address, hostname and (if available) operating system. If a script is targeted at a port it has access to the portnumber, the protocol (tcp, udp or ssl), the service running behind that port, and optionally information from a version-scan. NSE scripts by convention have an nse extension. Although you are not re- quired to follow this for the moment, this may change in the future. Nmap will issue a warning if a file has any other extension. More extensive doc- umentation on the NSE, including a description of its API can be found at http://nmap.org/book/nse.html. -sC Performs a script scan using the default set of scripts. It is equiva- lent to --script=default. Some of the scripts in this category are con- sidered intrusive and should not be run against a target network with- out permission. --script <script-categories|directory|filename|all> Runs a script scan (like -sC) with the scripts you have chosen rather than the defaults. Arguments can be script categories, single scripts or directories with scripts which are to be run against the target hosts instead of the default set. Nmap will try to interpret the argu- ments at first as categories and afterwards as files or directories. Absolute paths are used as is, relative paths are searched in the fol- lowing places until found: --datadir/; $(NMAPDIR)/; ~user/nmap/ (not searched on Windows); NMAP- DATADIR/ or ./. A scripts/ subdirectory is also tried in each of these. Give the argument all to execute all scripts in the Nmap script data- base. If a directory is specified and found, Nmap loads all NSE scripts (any filenames with the nse extension) from that directory. They must have the filename extension nse. Nmap does not recurse into subdirectories to find scripts. When individual file names are specified, the file ex- tension does not have to be nse. Nmap scripts are stored in a scripts subdirectory of the Nmap data di- rectory by default. Scripts are indexed in a database stored in scripts/script.db. The database lists all of the scripts in each cate- gory. A single script may be in several categories. --script-args <name1=value1,name2={name3=value3},name4=value4> lets you provide arguments to NSE-scripts. Arguments are passed as name=value pairs. The provided argument is processed and stored inside a Lua table, to which all scripts have access. The names are taken as strings (which must be alphanumeric values) and used as keys inside the argument-table. Values are either strings or tables themselves (sur- rounded by `{' and `}'. Subtables make it possible to override argu- ments for specific scripts (e.g. when you want to provide different lo- gin/password pairs for different scripts). For example, you could pass the comma-separated arguments: user=bar,password=foo, and anon- FTP={password=nobody@foobar.com}. If you want to override an option to a script, you should index the subtable with the script's id, since this is the only way the script knows about its special argument. --script-trace This option does what --packet-trace does, just one ISO layer higher. If this option is specified all incoming and outgoing communication performed by a script is printed. The displayed information includes the communication protocol, the source, the target and the transmitted data. If more than 5% of all transmitted data is not printable, then the trace output is in a hex dump format. --script-updatedb updates the script database which stores a mapping from category tags to filenames. The database is a Lua script which is interpreted once to choose a set of scripts from the categories provided to the --script argument. It should be run if you have changed the categories field of a script, if you have added new scripts or if you have removed scripts from the scripts/ directory. TIMING AND PERFORMANCE One of my highest Nmap development priorities has always been performance. A default scan (nmap hostname) of a host on my local network takes a fifth of a second. That is barely enough time to blink, but adds up when you are scanning tens or hundreds of thousands of hosts. Moreover, certain scan op- tions such as UDP scanning and version detection can increase scan times substantially. So can certain firewall configurations, particularly re- sponse rate limiting. While Nmap utilizes parallelism and many advanced al- gorithms to accelerate these scans, the user has ultimate control over how Nmap runs. Expert users carefully craft Nmap commands to obtain only the information they care about while meeting their time constraints. Techniques for improving scan times include omitting non-critical tests, and upgrading to the latest version of Nmap (performance enhancements are made frequently). Optimizing timing parameters can also make a substantial difference. Those options are listed below. Some options accept a time parameter. This is specified in milliseconds by default, though you can append `s', `m', or `h' to the value to specify seconds, minutes, or hours. So the --host-timeout arguments 900000, 900s, and 15m all do the same thing. --min-hostgroup <numhosts>; --max-hostgroup <numhosts> (Adjust parallel scan group sizes) Nmap has the ability to port scan or version scan multiple hosts in parallel. Nmap does this by dividing the target IP space into groups and then scanning one group at a time. In general, larger groups are more efficient. The downside is that host results can't be provided un- til the whole group is finished. So if Nmap started out with a group size of 50, the user would not receive any reports (except for the up- dates offered in verbose mode) until the first 50 hosts are completed. By default, Nmap takes a compromise approach to this conflict. It starts out with a group size as low as five so the first results come quickly and then increases the groupsize to as high as 1024. The exact default numbers depend on the options given. For efficiency reasons, Nmap uses larger group sizes for UDP or few-port TCP scans. When a maximum group size is specified with --max-hostgroup, Nmap will never exceed that size. Specify a minimum size with --min-hostgroup and Nmap will try to keep group sizes above that level. Nmap may have to use smaller groups than you specify if there are not enough target hosts left on a given interface to fulfill the specified minimum. Both may be set to keep the group size within a specific range, though this is rarely desired. These options do not have an effect during the host discovery phase of a scan. This includes plain ping scans (-sP). Host discovery always works in large groups of hosts to improve speed and accuracy. The primary use of these options is to specify a large minimum group size so that the full scan runs more quickly. A common choice is 256 to scan a network in Class C sized chunks. For a scan with many ports, ex- ceeding that number is unlikely to help much. For scans of just a few port numbers, host group sizes of 2048 or more may be helpful. --min-parallelism <numprobes>; --max-parallelism <numprobes> (Adjust probe parallelization) These options control the total number of probes that may be outstand- ing for a host group. They are used for port scanning and host discov- ery. By default, Nmap calculates an ever-changing ideal parallelism based on network performance. If packets are being dropped, Nmap slows down and allows fewer outstanding probes. The ideal probe number slowly rises as the network proves itself worthy. These options place minimum or maximum bounds on that variable. By default, the ideal parallelism can drop to 1 if the network proves unreliable and rise to several hun- dred in perfect conditions. The most common usage is to set --min-parallelism to a number higher than one to speed up scans of poorly performing hosts or networks. This is a risky option to play with, as setting it too high may affect accu- racy. Setting this also reduces Nmap's ability to control parallelism dynamically based on network conditions. A value of ten might be rea- sonable, though I only adjust this value as a last resort. The --max-parallelism option is sometimes set to one to prevent Nmap from sending more than one probe at a time to hosts. This can be useful in combination with --scan-delay (discussed later), although the latter usually serves the purpose well enough by itself. --min-rtt-timeout <time>, --max-rtt-timeout <time>, --initial-rtt-timeout <time> (Adjust probe timeouts) Nmap maintains a running timeout value for determining how long it will wait for a probe response before giving up or retransmitting the probe. This is calculated based on the response times of previous probes. If the network latency shows itself to be significant and variable, this timeout can grow to several seconds. It also starts at a conservative (high) level and may stay that way for a while when Nmap scans unre- sponsive hosts. Specifying a lower --max-rtt-timeout and --initial-rtt-timeout than the defaults can cut scan times significantly. This is particularly true for pingless (-PN) scans, and those against heavily filtered networks. Don't get too aggressive though. The scan can end up taking longer if you specify such a low value that many probes are timing out and re- transmitting while the response is in transit. If all the hosts are on a local network, 100 milliseconds is a reason- able aggressive --max-rtt-timeout value. If routing is involved, ping a host on the network first with the ICMP ping utility, or with a custom packet crafter such as hping2 that is more likely to get through a firewall. Look at the maximum round trip time out of ten packets or so. You might want to double that for the --initial-rtt-timeout and triple or quadruple it for the --max-rtt-timeout. I generally do not set the maximum RTT below 100 ms, no matter what the ping times are. Nor do I exceed 1000 ms. --min-rtt-timeout is a rarely used option that could be useful when a network is so unreliable that even Nmap's default is too aggressive. Since Nmap only reduces the timeout down to the minimum when the net- work seems to be reliable, this need is unusual and should be reported as a bug to the nmap-dev mailing list. --max-retries <numtries> (Specify the maximum number of port scan probe re- transmissions) When Nmap receives no response to a port scan probe, it could mean the port is filtered. Or maybe the probe or response was simply lost on the network. It is also possible that the target host has rate limiting en- abled that temporarily blocked the response. So Nmap tries again by re- transmitting the initial probe. If Nmap detects poor network reliabil- ity, it may try many more times before giving up on a port. While this benefits accuracy, it also lengthen scan times. When performance is critical, scans may be sped up by limiting the number of retransmis- sions allowed. You can even specify --max-retries 0 to prevent any re- transmissions, though that is rarely recommended. The default (with no -T template) is to allow ten retransmissions. If a network seems reliable and the target hosts aren't rate limiting, Nmap usually only does one retransmission. So most target scans aren't even affected by dropping --max-retries to a low value such as three. Such values can substantially speed scans of slow (rate limited) hosts. You usually lose some information when Nmap gives up on ports early, though that may be preferable to letting the --host-timeout expire and losing all information about the target. --host-timeout <time> (Give up on slow target hosts) Some hosts simply take a long time to scan. This may be due to poorly performing or unreliable networking hardware or software, packet rate limiting, or a restrictive firewall. The slowest few percent of the scanned hosts can eat up a majority of the scan time. Sometimes it is best to cut your losses and skip those hosts initially. Specify --host-timeout with the maximum amount of time you are willing to wait. I often specify 30m to ensure that Nmap doesn't waste more than half an hour on a single host. Note that Nmap may be scanning other hosts at the same time during that half an hour as well, so it isn't a complete loss. A host that times out is skipped. No port table, OS detection, or version detection results are printed for that host. --scan-delay <time>; --max-scan-delay <time> (Adjust delay between probes) This option causes Nmap to wait at least the given amount of time be- tween each probe it sends to a given host. This is particularly useful in the case of rate limiting. Solaris machines (among many others) will usually respond to UDP scan probe packets with only one ICMP message per second. Any more than that sent by Nmap will be wasteful. A --scan-delay of 1s will keep Nmap at that slow rate. Nmap tries to de- tect rate limiting and adjust the scan delay accordingly, but it doesn't hurt to specify it explicitly if you already know what rate works best. When Nmap adjusts the scan delay upward to cope with rate limiting, the scan slows down dramatically. The --max-scan-delay option specifies the largest delay that Nmap will allow. Setting this value too low can lead to wasteful packet retransmissions and possible missed ports when the target implements strict rate limiting. Another use of --scan-delay is to evade threshold based intrusion de- tection and prevention systems (IDS/IPS). --min-rate <number> (Specify a minimum scanning rate) Nmap's dynamic timing does a good job of finding an appropriate speed at which to scan. Sometimes, however, you may happen to know an appro- priate scanning rate for a network, or you may have to guarantee that a scan will be finished by a certain time. When the --min-rate option is given Nmap will do its best to send packets as fast or faster than the given rate. The argument is a positive real number representing a packet rate in packets per second. For example, specifying --min-rate 300 means that Nmap will try to keep the sending rate at or above 300 packets per second. Specifying a minimum rate does not keep Nmap from going faster if conditions warrant. There are two conditions when the actual scanning rate may fall below the specified minimum. The first is if the minimum is faster than the fastest rate at which Nmap can send, which is dependent on hardware. In this case Nmap will send packets as fast as possible, but be aware that such high rates are likely to cause a loss of accuracy. The second case is when Nmap has nothing to send, for example at the end of a scan when the last probes have been sent and Nmap is waiting for them to time out or be responded to. It's normal to see the scanning rate drop at the end of a scan or in between groups of hosts. Specifying a minimum rate should be done with care. Scanning faster than a network can support may lead to a loss of accuracy. In some cases, using a faster rate can make a scan take longer than it would with a slower rate. This is because Nmap's adaptive retransmission will detect the network congestion caused by an excessive scanning rate and increase the number of retransmissions in order to improve accuracy. So even though packets are sent at a higher rate, more packets are sent overall. Cap the number of retransmissions with the --max-retries op- tion if you need to set an upper limit on total scan time. The --min-rate option is global, affecting an entire scan, not individ- ual hosts. It only affects port and host discovery scans. Other fea- tures like OS detection implement their own timing. --defeat-rst-ratelimit Many hosts have long used rate limiting to reduce the number of ICMP error messages (such as port-unreachable errors) they send. Some sys- tems now apply similar rate limits to the RST (reset) packets they gen- erate. This can slow Nmap down dramatically as it adjusts its timing to reflect those rate limits. You can tell Nmap to ignore those rate lim- its (for port scans such as SYN scan which don't treat non-responsive ports as open) by specifying --defeat-rst-ratelimit. Using this option can reduce accuracy, as some ports will appear non-responsive because Nmap didn't wait long enough for a rate-limited RST response. With a SYN scan, the non-response results in the port be- ing labeled filtered rather than the closed state we see when RST pack- ets are received. This optional is useful when you only care about open ports, and distinguishing between closed and filtered ports isn't worth the extra time. -T <paranoid|sneaky|polite|normal|aggressive|insane> (Set a timing tem- plate) While the fine-grained timing controls discussed in the previous sec- tion are powerful and effective, some people find them confusing. More- over, choosing the appropriate values can sometimes take more time than the scan you are trying to optimize. So Nmap offers a simpler approach, with six timing templates. You can specify them with the -T option and their number (0-5) or their name. The template names are paranoid (0), sneaky (1), polite (2), normal (3), aggressive (4), and insane (5). The first two are for IDS evasion. Polite mode slows down the scan to use less bandwidth and target machine resources. Normal mode is the default and so -T3 does nothing. Aggressive mode speeds scans up by making the assumption that you are on a reasonably fast and reliable network. Fi- nally insane mode assumes that you are on an extraordinarily fast net- work or are willing to sacrifice some accuracy for speed. These templates allow the user to specify how aggressive they wish to be, while leaving Nmap to pick the exact timing values. The templates also make some minor speed adjustments for which fine-grained control options do not currently exist. For example, -T4 prohibits the dynamic scan delay from exceeding 10 ms for TCP ports and -T5 caps that value at 5 ms. Templates can be used in combination with fine-grained con- trols, and the fine-grained controls will you specify will take prece- dence over the timing template default for that parameter. I recommend using -T4 when scanning reasonably modern and reliable networks. Keep that option even when you add fine-grained controls so that you benefit from those extra minor optimizations that it enables. If you are on a decent broadband or ethernet connection, I would recom- mend always using -T4. Some people love -T5 though it is too aggressive for my taste. People sometimes specify -T2 because they think it is less likely to crash hosts or because they consider themselves to be polite in general. They often don't realize just how slow -T polite re- ally is. Their scan may take ten times longer than a default scan. Ma- chine crashes and bandwidth problems are rare with the default timing options (-T3) and so I normally recommend that for cautious scanners. Omitting version detection is far more effective than playing with tim- ing values at reducing these problems. While -T0 and -T1 may be useful for avoiding IDS alerts, they will take an extraordinarily long time to scan thousands of machines or ports. For such a long scan, you may prefer to set the exact timing values you need rather than rely on the canned -T0 and -T1 values. The main effects of T0 are serializing the scan so only one port is scanned at a time, and waiting five minutes between sending each probe. T1 and T2 are similar but they only wait 15 seconds and 0.4 seconds, respectively, between probes. T3 is Nmap's default behavior, which in- cludes parallelization. T4 does the equivalent of --max-rtt-timeout 1250 --initial-rtt-timeout 500 --max-retries 6 and sets the maximum TCP scan delay to 10 milliseconds. T5 does the equivalent of --max-rtt-timeout 300 --min-rtt-timeout 50 --initial-rtt-timeout 250 --max-retries 2 --host-timeout 15m as well as setting the maximum TCP scan delay to 5 ms. FIREWALL/IDS EVASION AND SPOOFING Many Internet pioneers envisioned a global open network with a universal IP address space allowing virtual connections between any two nodes. This al- lows hosts to act as true peers, serving and retrieving information from each other. People could access all of their home systems from work, chang- ing the climate control settings or unlocking the doors for early guests. This vision of universal connectivity has been stifled by address space shortages and security concerns. In the early 1990s, organizations began deploying firewalls for the express purpose of reducing connectivity. Huge networks were cordoned off from the unfiltered Internet by application proxies, network address translation, and packet filters. The unrestricted flow of information gave way to tight regulation of approved communication channels and the content that passes over them. Network obstructions such as firewalls can make mapping a network exceed- ingly difficult. It will not get any easier, as stifling casual reconnais- sance is often a key goal of implementing the devices. Nevertheless, Nmap offers many features to help understand these complex networks, and to ver- ify that filters are working as intended. It even supports mechanisms for bypassing poorly implemented defenses. One of the best methods of under- standing your network security posture is to try to defeat it. Place your- self in the mind-set of an attacker, and deploy techniques from this sec- tion against your networks. Launch an FTP bounce scan, idle scan, fragmen- tation attack, or try to tunnel through one of your own proxies. In addition to restricting network activity, companies are increasingly monitoring traffic with intrusion detection systems (IDS). All of the major IDSs ship with rules designed to detect Nmap scans because scans are some- times a precursor to attacks. Many of these products have recently morphed into intrusion prevention systems (IPS) that actively block traffic deemed malicious. Unfortunately for network administrators and IDS vendors, reli- ably detecting bad intentions by analyzing packet data is a tough problem. Attackers with patience, skill, and the help of certain Nmap options can usually pass by IDSs undetected. Meanwhile, administrators must cope with large numbers of false positive results where innocent activity is misdiag- nosed and alerted on or blocked. Occasionally people suggest that Nmap should not offer features for evading firewall rules or sneaking past IDSs. They argue that these features are just as likely to be misused by attackers as used by administrators to en- hance security. The problem with this logic is that these methods would still be used by attackers, who would just find other tools or patch the functionality into Nmap. Meanwhile, administrators would find it that much harder to do their jobs. Deploying only modern, patched FTP servers is a far more powerful defense than trying to prevent the distribution of tools implementing the FTP bounce attack. There is no magic bullet (or Nmap option) for detecting and subverting firewalls and IDS systems. It takes skill and experience. A tutorial is be- yond the scope of this reference guide, which only lists the relevant op- tions and describes what they do. -f (fragment packets); --mtu (using the specified MTU) The -f option causes the requested scan (including ping scans) to use tiny fragmented IP packets. The idea is to split up the TCP header over several packets to make it harder for packet filters, intrusion detec- tion systems, and other annoyances to detect what you are doing. Be careful with this! Some programs have trouble handling these tiny pack- ets. The old-school sniffer named Sniffit segmentation faulted immedi- ately upon receiving the first fragment. Specify this option once, and Nmap splits the packets into 8 bytes or less after the IP header. So a 20-byte TCP header would be split into 3 packets. Two with eight bytes of the TCP header, and one with the final four. Of course each fragment also has an IP header. Specify -f again to use 16 bytes per fragment (reducing the number of fragments). Or you can specify your own offset size with the --mtu option. Don't also specify -f if you use --mtu. The offset must be a multiple of 8. While fragmented packets won't get by packet filters and firewalls that queue all IP fragments, such as the CONFIG_IP_ALWAYS_DEFRAG option in the Linux kernel, some networks can't afford the performance hit this causes and thus leave it disabled. Oth- ers can't enable this because fragments may take different routes into their networks. Some source systems defragment outgoing packets in the kernel. Linux with the iptables connection tracking module is one such example. Do a scan while a sniffer such as Wireshark is running to en- sure that sent packets are fragmented. If your host OS is causing prob- lems, try the --send-eth option to bypass the IP layer and send raw ethernet frames. -D <decoy1 [,decoy2][,ME],...> (Cloak a scan with decoys) Causes a decoy scan to be performed, which makes it appear to the re- mote host that the host(s) you specify as decoys are scanning the tar- get network too. Thus their IDS might report 5-10 port scans from unique IP addresses, but they won't know which IP was scanning them and which were innocent decoys. While this can be defeated through router path tracing, response-dropping, and other active mechanisms, it is generally an effective technique for hiding your IP address. Separate each decoy host with commas, and you can optionally use ME as one of the decoys to represent the position for your real IP address. If you put ME in the 6th position or later, some common port scan de- tectors (such as Solar Designer's excellent Scanlogd) are unlikely to show your IP address at all. If you don't use ME, nmap will put you in a random position. You can also use RND to generate a random, non-re- served IP address, or RND:<number> to generate <number> addresses. Note that the hosts you use as decoys should be up or you might acci- dentally SYN flood your targets. Also it will be pretty easy to deter- mine which host is scanning if only one is actually up on the network. You might want to use IP addresses instead of names (so the decoy net- works don't see you in their nameserver logs). Decoys are used both in the initial ping scan (using ICMP, SYN, ACK, or whatever) and during the actual port scanning phase. Decoys are also used during remote OS detection (-O). Decoys do not work with version detection or TCP connect scan. When a scan delay is in effect, the de- lay is enforced between each batch of spoofed probes, not between each individual probe. Because decoys are sent as a batch all at once, they may temporarily violate congestion control limits. It is worth noting that using too many decoys may slow your scan and potentially even make it less accurate. Also, some ISPs will filter out your spoofed packets, but many do not restrict spoofed IP packets at all. -S <IP_Address> (Spoof source address) In some circumstances, Nmap may not be able to determine your source address ( Nmap will tell you if this is the case). In this situation, use -S with the IP address of the interface you wish to send packets through. Another possible use of this flag is to spoof the scan to make the tar- gets think that someone else is scanning them. Imagine a company being repeatedly port scanned by a competitor! The -e option and -PN are gen- erally required for this sort of usage. Note that you usually won't re- ceive reply packets back (they will be addressed to the IP you are spoofing), so Nmap won't produce useful reports. -e <interface> (Use specified interface) Tells Nmap what interface to send and receive packets on. Nmap should be able to detect this automatically, but it will tell you if it can- not. --source-port <portnumber>; -g <portnumber> (Spoof source port number) One surprisingly common misconfiguration is to trust traffic based only on the source port number. It is easy to understand how this comes about. An administrator will set up a shiny new firewall, only to be flooded with complains from ungrateful users whose applications stopped working. In particular, DNS may be broken because the UDP DNS replies from external servers can no longer enter the network. FTP is another common example. In active FTP transfers, the remote server tries to es- tablish a connection back to the client to transfer the requested file. Secure solutions to these problems exist, often in the form of applica- tion-level proxies or protocol-parsing firewall modules. Unfortunately there are also easier, insecure solutions. Noting that DNS replies come from port 53 and active FTP from port 20, many administrators have fallen into the trap of simply allowing incoming traffic from those ports. They often assume that no attacker would notice and exploit such firewall holes. In other cases, administrators consider this a short-term stop-gap measure until they can implement a more secure so- lution. Then they forget the security upgrade. Overworked network administrators are not the only ones to fall into this trap. Numerous products have shipped with these insecure rules. Even Microsoft has been guilty. The IPsec filters that shipped with Windows 2000 and Windows XP contain an implicit rule that allows all TCP or UDP traffic from port 88 (Kerberos). In another well-known case, versions of the Zone Alarm personal firewall up to 2.1.25 allowed any incoming UDP packets with the source port 53 (DNS) or 67 (DHCP). Nmap offers the -g and --source-port options (they are equivalent) to exploit these weaknesses. Simply provide a port number and Nmap will send packets from that port where possible. Nmap must use different port numbers for certain OS detection tests to work properly, and DNS requests ignore the --source-port flag because Nmap relies on system libraries to handle those. Most TCP scans, including SYN scan, support the option completely, as does UDP scan. --data-length <number> (Append random data to sent packets) Normally Nmap sends minimalist packets containing only a header. So its TCP packets are generally 40 bytes and ICMP echo requests are just 28. This option tells Nmap to append the given number of random bytes to most of the packets it sends. OS detection (-O) packets are not af- fected because accuracy there requires probe consistency, but most pinging and portscan packets support this. It slows things down a lit- tle, but can make a scan slightly less conspicuous. --ip-options <S|R [route]|L [route]|T|U ... >; --ip-options <hex string> (Send packets with specified ip options) The IP protocol[9] offers several options which may be placed in packet headers. Unlike the ubiquitous TCP options, IP options are rarely seen due to practicality and security concerns. In fact, many Internet routers block the most dangerous options such as source routing. Yet options can still be useful in some cases for determining and manipu- lating the network route to target machines. For example, you may be able to use the record route option to determine a path to a target even when more traditional traceroute-style approaches fail. Or if your packets are being dropped by a certain firewall, you may be able to specify a different route with the strict or loose source routing op- tions. The most powerful way to specify IP options is to simply pass in values as the argument to --ip-options. Precede each hex number with \x then the two digits. You may repeat certain characters by following them with an asterisk and then the number of times you wish them to repeat. For example, \x01\x07\x04\x00*36\x01 is a hex string containing 36 NUL bytes. Nmap also offers a shortcut mechanism for specifying options. Simply pass the letter R, T, or U to request record-route, record-timestamp, or both options together, respectively. Loose or strict source routing may be specified with an L or S followed by a space and then a space-separated list of IP addresses. If you wish to see the options in packets sent and received, specify --packet-trace. For more information and examples of using IP options with Nmap, see http://seclists.org/nmap-dev/2006/q3/0052.html. --ttl <value> (Set IP time-to-live field) Sets the IPv4 time-to-live field in sent packets to the given value. --randomize-hosts (Randomize target host order) Tells Nmap to shuffle each group of up to 16384 hosts before it scans them. This can make the scans less obvious to various network monitor- ing systems, especially when you combine it with slow timing options. If you want to randomize over larger group sizes, increase PING_GROUP_SZ in nmap.h and recompile. An alternative solution is to generate the target IP list with a list scan (-sL -n -oN filename), randomize it with a Perl script, then provide the whole list to Nmap with -iL. --spoof-mac <MAC address, prefix, or vendor name> (Spoof MAC address) Asks Nmap to use the given MAC address for all of the raw ethernet frames it sends. This option implies --send-eth to ensure that Nmap ac- tually sends ethernet-level packets. The MAC given can take several formats. If it is simply the number 0, Nmap chooses a completely random MAC address for the session. If the given string is an even number of hex digits (with the pairs optionally separated by a colon), Nmap will use those as the MAC. If fewer than 12 hex digits are provided, Nmap fills in the remainder of the 6 bytes with random values. If the argu- ment isn't a 0 or hex string, Nmap looks through nmap-mac-prefixes to find a vendor name containing the given string (it is case insensi- tive). If a match is found, Nmap uses the vendor's OUI (3-byte prefix) and fills out the remaining 3 bytes randomly. Valid --spoof-mac argu- ment examples are Apple, 0, 01:02:03:04:05:06, deadbeefcafe, 0020F2, and Cisco. This option only affects raw packet scans such as SYN scan or OS detection, not connection-oriented features such as version de- tection or the Nmap Scripting Engine. --badsum (Send packets with bogus TCP/UDP checksums) Asks Nmap to use an invalid TCP or UDP checksum for packets sent to target hosts. Since virtually all host IP stacks properly drop these packets, any responses received are likely coming from a firewall or IDS that didn't bother to verify the checksum. For more details on this technique, see http://nmap.org/p60-12.html OUTPUT Any security tools is only as useful as the output it generates. Complex tests and algorithms are of little value if they aren't presented in an or- ganized and comprehensible fashion. Given the number of ways Nmap is used by people and other software, no single format can please everyone. So Nmap offers several formats, including the interactive mode for humans to read directly and XML for easy parsing by software. In addition to offering different output formats, Nmap provides options for controlling the verbosity of output as well as debugging messages. Output types may be sent to standard output or to named files, which Nmap can ap- pend to or clobber. Output files may also be used to resume aborted scans. Nmap makes output available in five different formats. The default is called interactive output, and it is sent to standard output (stdout). There is also normal output, which is similar to interactive except that it displays less runtime information and warnings since it is expected to be analyzed after the scan completes rather than interactively. XML output is one of the most important output types, as it can be con- verted to HTML, easily parsed by programs such as Nmap graphical user in- terfaces, or imported into databases. The two remaining output types are the simple grepable output which in- cludes most information for a target host on a single line, and sCRiPt KiDDi3 0utPUt for users who consider themselves |<-r4d. While interactive output is the default and has no associated command-line options, the other four format options use the same syntax. They take one argument, which is the filename that results should be stored in. Multiple formats may be specified, but each format may only be specified once. For example, you may wish to save normal output for your own review while sav- ing XML of the same scan for programmatic analysis. You might do this with the options -oX myscan.xml -oN myscan.nmap. While this chapter uses the simple names like myscan.xml for brevity, more descriptive names are gener- ally recommended. The names chosen are a matter of personal preference, though I use long ones that incorporate the scan date and a word or two de- scribing the scan, placed in a directory named after the company I'm scan- ning. While these options save results to files, Nmap still prints interactive output to stdout as usual. For example, the command nmap -oX myscan.xml target prints XML to myscan.xml and fills standard output with the same in- teractive results it would have printed if -oX wasn't specified at all. You can change this by passing a hyphen character as the argument to one of the format types. This causes Nmap to deactivate interactive output, and in- stead print results in the format you specified to the standard output stream. So the command nmap -oX - target will send only XML output to std- out. Serious errors may still be printed to the normal error stream, stderr. Unlike some Nmap arguments, the space between the logfile option flag (such as -oX) and the filename or hyphen is mandatory. If you omit the flags and give arguments such as -oG- or -oXscan.xml, a backwards compatibility fea- ture of Nmap will cause the creation of normal format output files named G- and Xscan.xml respectively. All of these arguments support strftime()-like conversions in the filename. %H, %M, %S, %m, %d, %y, and %Y are all exactly the same as in strftime(). %T is the same as %H%M%S, %R is the same as %H%M, and %D is the same as %m%d%y. A % followed by any other character just yields that character (%% gives you a percent symbol). So -oX 'scan-%T-%D.xml' will use an XML file in the form of scan-144840-121307.xml. Nmap also offers options to control scan verbosity and to append to output files rather than clobbering them. All of these options are described be- low. Nmap Output Formats -oN <filespec> (normal output) Requests that normal output be directed to the given filename. As dis- cussed above, this differs slightly from interactive output. -oX <filespec> (XML output) Requests that XML output be directed to the given filename. Nmap in- cludes a document type definition (DTD) which allows XML parsers to validate Nmap XML output. While it is primarily intended for program- matic use, it can also help humans interpret Nmap XML output. The DTD defines the legal elements of the format, and often enumerates the at- tributes and values they can take on. The latest version is always available from http://nmap.org/data/nmap.dtd. XML offers a stable format that is easily parsed by software. Free XML parsers are available for all major computer languages, including C/C++, Perl, Python, and Java. People have even written bindings for most of these languages to handle Nmap output and execution specifi- cally. Examples are Nmap::Scanner[10] and Nmap::Parser[11] in Perl CPAN. In almost all cases that a non-trivial application interfaces with Nmap, XML is the preferred format. The XML output references an XSL stylesheet which can be used to format the results as HTML. The easiest way to use this is simply to load the XML output in a web browser such as Firefox or IE. By default, this will only work on the machine you ran Nmap on (or a similarly config- ured one) due to the hard-coded nmap.xsl filesystem path. Use the --we- bxml or --stylesheet options to create portable XML files that render as HTML on any web-connected machine. -oS <filespec> (ScRipT KIdd|3 oUTpuT) Script kiddie output is like interactive output, except that it is post-processed to better suit the l33t HaXXorZ who previously looked down on Nmap due to its consistent capitalization and spelling. Humor impaired people should note that this option is making fun of the script kiddies before flaming me for supposedly "helping them". -oG <filespec> (grepable output) This output format is covered last because it is deprecated. The XML output format is far more powerful, and is nearly as convenient for ex- perienced users. XML is a standard for which dozens of excellent parsers are available, while grepable output is my own simple hack. XML is extensible to support new Nmap features as they are released, while I often must omit those features from grepable output for lack of a place to put them. Nevertheless, grepable output is still quite popular. It is a simple format that lists each host on one line and can be trivially searched and parsed with standard Unix tools such as grep, awk, cut, sed, diff, and Perl. Even I usually use it for one-off tests done at the command line. Finding all the hosts with the SSH port open or that are running Solaris takes only a simple grep to identify the hosts, piped to an awk or cut command to print the desired fields. Grepable output consists of comments (lines starting with a pound (#)) and target lines. A target line includes a combination of 6 labeled fields, separated by tabs and followed with a colon. The fields are Host, Ports, Protocols, Ignored State, OS, Seq Index, IP ID, and Sta- tus. The most important of these fields is generally Ports, which gives de- tails on each interesting port. It is a comma separated list of port entries. Each port entry represents one interesting port, and takes the form of seven slash (/) separated subfields. Those subfields are: Port number, State, Protocol, Owner, Service, SunRPC info, and Version info. As with XML output, this man page does not allow for documenting the entire format. A more detailed look at the Nmap grepable output format is available from http://nmap.org/book/output-formats-grepable-output.html. -oA <basename> (Output to all formats) As a convenience, you may specify -oA basename to store scan results in normal, XML, and grepable formats at once. They are stored in base- name.nmap, basename.xml, and basename.gnmap, respectively. As with most programs, you can prefix the filenames with a directory path, such as ~/nmaplogs/foocorp/ on Unix or c:\hacking\sco on Windows. Verbosity and debugging options -v (Increase verbosity level) Increases the verbosity level, causing Nmap to print more information about the scan in progress. Open ports are shown as they are found and completion time estimates are provided when Nmap thinks a scan will take more than a few minutes. Use it twice or more for even greater verbosity. Most changes only affect interactive output, and some also affect nor- mal and script kiddie output. The other output types are meant to be processed by machines, so Nmap can give substantial detail by default in those formats without fatiguing a human user. However, there are a few changes in other modes where output size can be reduced substan- tially by omitting some detail. For example, a comment line in the grepable output that provides a list of all ports scanned is only printed in verbose mode because it can be quite long. -d [level] (Increase or set debugging level) When even verbose mode doesn't provide sufficient data for you, debug- ging is available to flood you with much more! As with the verbosity option (-v), debugging is enabled with a command-line flag (-d) and the debug level can be increased by specifying it multiple times. Alterna- tively, you can set a debug level by giving an argument to -d. For ex- ample, -d9 sets level nine. That is the highest effective level and will produce thousands of lines unless you run a very simple scan with very few ports and targets. Debugging output is useful when a bug is suspected in Nmap, or if you are simply confused as to what Nmap is doing and why. As this feature is mostly intended for developers, debug lines aren't always self-ex- planatory. You may get something like: Timeout vals: srtt: -1 rttvar: -1 to: 1000000 delta 14987 ==> srtt: 14987 rttvar: 14987 to: 100000. If you don't understand a line, your only recourses are to ignore it, look it up in the source code, or request help from the development list (nmap-dev). Some lines are self explanatory, but the messages become more obscure as the debug level is increased. --packet-trace (Trace packets and data sent and received) Causes Nmap to print a summary of every packet sent or received. This is often used for debugging, but is also a valuable way for new users to understand exactly what Nmap is doing under the covers. To avoid printing thousands of lines, you may want to specify a limited number of ports to scan, such as -p20-30. If you only care about the goings on of the version detection subsystem, use --version-trace instead. --open (Show only open (or possibly open) ports) Sometimes you only care about ports you can actually connect to (open ones), and don't want results cluttered with closed, filtered, and closed|filtered ports. Output customization is normally done after the scan using tools such as grep, awk, and Perl, but this feature was added due to overwhelming requests. Specify --open to only see open, open|filtered, and unfiltered ports. These three ports are treated just as they normally are, which means that open|filtered and unfiltered may be condensed into counts if there are an overwhelming number of them. --iflist (List interfaces and routes) Prints the interface list and system routes as detected by Nmap. This is useful for debugging routing problems or device mischaracterization (such as Nmap treating a PPP connection as ethernet). --log-errors (Log errors/warnings to normal mode output file) Warnings and errors printed by Nmap usually go only to the screen (in- teractive output), leaving any normal-format output files (usually specified with -oN) uncluttered. When you do want to see those messages in the normal output file you specified, add this option. It is useful when you aren't watching the interactive output or when you want to record errors while debugging a problem. The error and warning messages will still appear in interactive mode too. This won't work for most er- rors related to bad command-line arguments because Nmap may not have initialized its output files yet. In addition, some Nmap error and warning messages use a different system which does not yet support this option. An alternative to --log-errors is redirecting interactive output (in- cluding the standard error stream) to a file. Most Unix shells make this approach easy, though it can be difficult on Windows. Miscellaneous output options --append-output (Append to rather than clobber output files) When you specify a filename to an output format flag such as -oX or -oN, that file is overwritten by default. If you prefer to keep the ex- isting content of the file and append the new results, specify the --append-output option. All output filenames specified in that Nmap ex- ecution will then be appended to rather than clobbered. This doesn't work well for XML (-oX) scan data as the resultant file generally won't parse properly until you fix it up by hand. --resume <filename> (Resume aborted scan) Some extensive Nmap runs take a very long time--on the order of days. Such scans don't always run to completion. Restrictions may prevent Nmap from being run during working hours, the network could go down, the machine Nmap is running on might suffer a planned or unplanned re- boot, or Nmap itself could crash. The administrator running Nmap could cancel it for any other reason as well, by pressing ctrl-C. Restarting the whole scan from the beginning may be undesirable. Fortunately, if normal (-oN) or grepable (-oG) logs were kept, the user can ask Nmap to resume scanning with the target it was working on when execution ceased. Simply specify the --resume option and pass the normal/grepable output file as its argument. No other arguments are permitted, as Nmap parses the output file to use the same ones specified previously. Sim- ply call Nmap as nmap --resume logfilename. Nmap will append new re- sults to the data files specified in the previous execution. Resumption does not support the XML output format because combining the two runs into one valid XML file would be difficult. --stylesheet <path or URL> (Set XSL stylesheet to transform XML output) Nmap ships with an XSL stylesheet named nmap.xsl for viewing or trans- lating XML output to HTML. The XML output includes an xml-stylesheet directive which points to nmap.xml where it was initially installed by Nmap (or in the current working directory on Windows). Simply load Nmap's XML output in a modern web browser and it should retrieve nmap.xsl from the filesystem and use it to render results. If you wish to use a different stylesheet, specify it as the argument to --stylesheet. You must pass the full pathname or URL. One common invo- cation is --stylesheet http://nmap.org/data/nmap.xsl. This tells a browser to load the latest version of the stylesheet from Insecure.Org. The --webxml option does the same thing with less typing and memoriza- tion. Loading the XSL from Insecure.Org makes it easier to view results on a machine that doesn't have Nmap (and thus nmap.xsl) installed. So the URL is often more useful, but the local filesystem location of nmap.xsl is used by default for privacy reasons. --webxml (Load stylesheet from Insecure.Org) This convenience option is simply an alias for --stylesheet http://nmap.org/data/nmap.xsl. --no-stylesheet (Omit XSL stylesheet declaration from XML) Specify this option to prevent Nmap from associating any XSL stylesheet with its XML output. The xml-stylesheet directive is omitted. MISCELLANEOUS OPTIONS This section describes some important (and not-so-important) options that don't really fit anywhere else. -6 (Enable IPv6 scanning) Since 2002, Nmap has offered IPv6 support for its most popular fea- tures. In particular, ping scanning (TCP-only), connect scanning, and version detection all support IPv6. The command syntax is the same as usual except that you also add the -6 option. Of course, you must use IPv6 syntax if you specify an address rather than a hostname. An ad- dress might look like 3ffe:7501:4819:2000:210:f3ff:fe03:14d0, so host- names are recommended. The output looks the same as usual, with the IPv6 address on the "interesting ports" line being the only IPv6 give away. While IPv6 hasn't exactly taken the world by storm, it gets significant use in some (usually Asian) countries and most modern operating systems support it. To use Nmap with IPv6, both the source and target of your scan must be configured for IPv6. If your ISP (like most of them) does not allocate IPv6 addresses to you, free tunnel brokers are widely available and work fine with Nmap. I use the free IPv6 tunnel broker service at http://www.tunnelbroker.net. Other tunnel brokers are listed at Wikipedia[12]. 6to4 tunnels are another popular, free approach. -A (Aggressive scan options) This option enables additional advanced and aggressive options. I haven't decided exactly which it stands for yet. Presently this enables OS detection (-O), version scanning (-sV), script scanning (-sC) and traceroute (--traceroute). More features may be added in the future. The point is to enable a comprehensive set of scan options without peo- ple having to remember a large set of flags. However, because script scanning with the default set is considered intrusive, you should not use -A against target networks without permission. This option only en- ables features, and not timing options (such as -T4) or verbosity op- tions (-v) that you might want as well. --datadir <directoryname> (Specify custom Nmap data file location) Nmap obtains some special data at runtime in files named nmap-ser- vice-probes, nmap-services, nmap-protocols, nmap-rpc, nmap-mac-pre- fixes, and nmap-os-db. If the location of any of these files has been specified (using the --servicedb or --versiondb options), that location is used for that file. After that, Nmap searches these files in the di- rectory specified with the --datadir option (if any). Any files not found there, are searched for in the directory specified by the NMAPDIR environmental variable. Next comes ~/.nmap for real and effective UIDs (POSIX systems only) or location of the Nmap executable (Win32 only), and then a compiled-in location such as /usr/local/share/nmap or /usr/share/nmap --servicedb <services file> (Specify custom services file) Asks Nmap to use the specified services file rather than the nmap-ser- vices data file that comes with Nmap. Using this option also causes a fast scan (-F) to be used. See the description for --datadir for more information on Nmap's data files. --versiondb <service probes file> (Specify custom service probes file) Asks Nmap to use the specified service probes file rather than the nmap-service-probes data file that comes with Nmap. See the description for --datadir for more information on Nmap's data files. --send-eth (Use raw ethernet sending) Asks Nmap to send packets at the raw ethernet (data link) layer rather than the higher IP (network) layer. By default, Nmap chooses the one which is generally best for the platform it is running on. Raw sockets (IP layer) are generally most efficient for Unix machines, while ether- net frames are required for Windows operation since Microsoft disabled raw socket support. Nmap still uses raw IP packets on Unix despite this option when there is no other choice (such as non-ethernet connec- tions). --send-ip (Send at raw IP level) Asks Nmap to send packets via raw IP sockets rather than sending lower level ethernet frames. It is the complement to the --send-eth option discussed previously. --privileged (Assume that the user is fully privileged) Tells Nmap to simply assume that it is privileged enough to perform raw socket sends, packet sniffing, and similar operations that usually re- quire root privileges on Unix systems. By default Nmap quits if such operations are requested but geteuid() is not zero. --privileged is useful with Linux kernel capabilities and similar systems that may be configured to allow unprivileged users to perform raw-packet scans. Be sure to provide this option flag before any flags for options that re- quire privileges (SYN scan, OS detection, etc.). The NMAP_PRIVILEGED environmental variable may be set as an equivalent alternative to --privileged. --unprivileged (Assume that the user lacks raw socket privileges) This option is the opposite of --privileged. It tells Nmap to treat the user as lacking network raw socket and sniffing privileges. This is useful for testing, debugging, or when the raw network functionality of your operating system is somehow broken. The NMAP_UNPRIVILEGED environ- mental variable may be set as an equivalent alternative to --unprivi- leged. --release-memory (Release memory before quitting) This option is only useful for memory-leak debugging. It causes Nmap to release allocated memory just before it quits so that actual memory leaks are easier to spot. Normally Nmap skips this as the OS does this anyway upon process termination. --interactive (Start in interactive mode) Starts Nmap in interactive mode, which offers an interactive Nmap prompt allowing easy launching of multiple scans (either synchronously or in the background). This is useful for people who scan from multi-user systems as they often want to test their security without letting everyone else on the system know exactly which systems they are scanning. Use --interactive to activate this mode and then type h for help. This option is rarely used because proper shells are usually more familiar and feature-complete. This option includes a bang (!) operator for executing shell commands, which is one of many reasons not to in- stall Nmap setuid root. -V; --version (Print version number) Prints the Nmap version number and exits. -h; --help (Print help summary page) Prints a short help screen with the most common command flags. Running Nmap without any arguments does the same thing. RUNTIME INTERACTION During the execution of nmap, all key presses are captured. This allows you to interact with the program without aborting and restarting it. Certain special keys will change options, while any other keys will print out a status message telling you about the scan. The convention is that lowercase letters increase the amount of printing, and uppercase letters decrease the printing. You may also press `?' for help. v / V Increase / decrease the verbosity level d / D Increase / decrease the debugging Level p / P Turn on / off packet tracing ? Print a runtime interaction help screen Anything else Print out a status message like this: Stats: 0:00:08 elapsed; 111 hosts completed (5 up), 5 undergoing Ser- vice Scan Service scan Timing: About 28.00% done; ETC: 16:18 (0:00:15 remaining) EXAMPLES Here are some Nmap usage examples, from the simple and routine to a little more complex and esoteric. Some actual IP addresses and domain names are used to make things more concrete. In their place you should substitute ad- dresses/names from your own network.. While I don't think port scanning other networks is or should be illegal, some network administrators don't appreciate unsolicited scanning of their networks and may complain. Getting permission first is the best approach. For testing purposes, you have permission to scan the host scanme.nmap.org. This permission only includes scanning via Nmap and not testing exploits or denial of service attacks. To conserve bandwidth, please do not initiate more than a dozen scans against that host per day. If this free scanning target service is abused, it will be taken down and Nmap will report Failed to resolve given hostname/IP: scanme.nmap.org. These permissions also apply to the hosts scanme2.nmap.org, scanme3.nmap.org, and so on, though those hosts do not currently exist. nmap -v scanme.nmap.org This option scans all reserved TCP ports on the machine scanme.nmap.org -v option enables verbose mode. nmap -sS -O scanme.nmap.org/24 Launches a stealth SYN scan against each machine that is up out of the 255 machines on "class C" network where Scanme resides. It also tries to deter- mine what operating system is running on each host that is up and running. This requires root privileges because of the SYN scan and OS detection. nmap -sV -p 22,53,110,143,4564 198.116.0-255.1-127 Launches host enumeration and a TCP scan at the first half of each of the 255 possible 8 bit subnets in the 198.116 class B address space. This tests whether the systems run SSH, DNS, POP3, or IMAP on their standard ports, or anything on port 4564. For any of these ports found open, version detection is used to determine what application is running. nmap -v -iR 100000 -PN -p 80 Asks Nmap to choose 100,000 hosts at random and scan them for web servers (port 80). Host enumeration is disabled with -PN since first sending a cou- ple probes to determine whether a host is up is wasteful when you are only probing one port on each target host anyway. nmap -PN -p80 -oX logs/pb-port80scan.xml -oG logs/pb-port80scan.gnmap 216.163.128.20/20 This scans 4096 IPs for any web servers (without pinging them) and saves the output in grepable and XML formats. BUGS Like its author, Nmap isn't perfect. But you can help make it better by sending bug reports or even writing patches. If Nmap doesn't behave the way you expect, first upgrade to the latest version available from http://nmap.org. If the problem persists, do some research to determine whether it has already been discovered and addressed. Try Googling the er- ror message or browsing the nmap-dev archives at http://seclists.org/. Read this full manual page as well. If nothing comes of this, mail a bug report to <nmap-dev@insecure.org>. Please include everything you have learned about the problem, as well as what version of Nmap you are running and what operating system version it is running on. Problem reports and Nmap usage questions sent to nmap-dev@insecure.org are far more likely to be answered than those sent to Fyodor directly. Code patches to fix bugs are even better than bug reports. Basic instruc- tions for creating patch files with your changes are available at http://nmap.org/data/HACKING. Patches may be sent to nmap-dev (recommended) or to Fyodor directly. AUTHOR Fyodor <fyodor@insecure.org> (http://insecure.org) Hundreds of people have made valuable contributions to Nmap over the years. These are detailed in the CHANGELOG file which is distributed with Nmap and also available from http://nmap.org/changelog.html. LEGAL NOTICES Nmap Copyright and Licensing The Nmap Security Scanner is (C) 1996-2008 Insecure.Com LLC. Nmap is also a registered trademark of Insecure.Com LLC. This program is free software; you may redistribute and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; Version 2 with the clarifications and exceptions described below. This guarantees your right to use, modify, and redistribute this software under certain condi- tions. If you wish to embed Nmap technology into proprietary software, we sell alternative licenses (contact <sales@insecure.com>). Dozens of soft- ware vendors already license Nmap technology such as host discovery, port scanning, OS detection, and version detection. Note that the GPL places important restrictions on "derived works", yet it does not provide a detailed definition of that term. To avoid misunder- standings, we consider an application to constitute a "derivative work" for the purpose of this license if it does any of the following: * Integrates source code from Nmap * Reads or includes Nmap copyrighted data files, such as nmap-os-db or nmap-service-probes. * Executes Nmap and parses the results (as opposed to typical shell or execution-menu apps, which simply display raw Nmap output and so are not derivative works.) * Integrates/includes/aggregates Nmap into a proprietary executable in- staller, such as those produced by InstallShield. * Links to a library or executes a program that does any of the above. The term "Nmap" should be taken to also include any portions or derived works of Nmap. This list is not exclusive, but is just meant to clarify our interpretation of derived works with some common examples. These restric- tions only apply when you actually redistribute Nmap. For example, nothing stops you from writing and selling a proprietary front-end to Nmap. Just distribute it by itself, and point people to http://nmap.org to download Nmap. We don't consider these to be added restrictions on top of the GPL, but just a clarification of how we interpret "derived works" as it applies to our GPL-licensed Nmap product. This is similar to the way Linus Torvalds has announced his interpretation of how "derived works" applies to Linux kernel modules. Our interpretation refers only to Nmap--we don't speak for any other GPL products. If you have any questions about the GPL licensing restrictions on using Nmap in non-GPL works, we would be happy to help. As mentioned above, we also offer alternative license to integrate Nmap into proprietary applica- tions and appliances. These contracts have been sold to many security ven- dors, and generally include a perpetual license as well as providing for priority support and updates as well as helping to fund the continued de- velopment of Nmap technology. Please email <sales@insecure.com> for further information. As a special exception to the GPL terms, Insecure.Com LLC grants permission to link the code of this program with any version of the OpenSSL library which is distributed under a license identical to that listed in the in- cluded COPYING.OpenSSL file, and distribute linked combinations including the two. You must obey the GNU GPL in all respects for all of the code used other than OpenSSL. If you modify this file, you may extend this exception to your version of the file, but you are not obligated to do so. If you received these files with a written license agreement or contract stating terms other than the terms above, then that alternative license agreement takes precedence over these comments. Creative Commons License for this Nmap Guide This Nmap Reference Guide is (C) 2005-2008 Insecure.Com LLC. It is hereby placed under version 2.5 of the Creative Commons Attribution License[13]. This allows you redistribute and modify the work as you desire, as long as you credit the original source. Alternatively, you may choose to treat this document as falling under the same license as Nmap itself (discussed previ- ously). Source Code Availability and Community Contributions Source is provided to this software because we believe users have a right to know exactly what a program is going to do before they run it. This also allows you to audit the software for security holes (none have been found so far). Source code also allows you to port Nmap to new platforms, fix bugs, and add new features. You are highly encouraged to send your changes to <fyo- dor@insecure.org> for possible incorporation into the main distribution. By sending these changes to Fyodor or one of the Insecure.Org development mailing lists, it is assumed that you are offering Fyodor and Insecure.Com LLC the unlimited, non-exclusive right to reuse, modify, and relicense the code. Nmap will always be available Open Source, but this is important be- cause the inability to relicense code has caused devastating problems for other Free Software projects (such as KDE and NASM). We also occasionally relicense the code to third parties as discussed above. If you wish to specify special license conditions of your contributions, just say so when you send them. No Warranty This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FIT- NESS FOR A PARTICULAR PURPOSE. See the GNU General Public License v2.0 for more details at http://www.gnu.org/licenses/gpl-2.0.html, or in the COPYING file included with Nmap. It should also be noted that Nmap has occasionally been known to crash poorly written applications, TCP/IP stacks, and even operating systems. While this is extremely rare, it is important to keep in mind. Nmap should never be run against mission critical systems unless you are prepared to suffer downtime. We acknowledge here that Nmap may crash your systems or networks and we disclaim all liability for any damage or problems Nmap could cause. Inappropriate Usage Because of the slight risk of crashes and because a few black hats like to use Nmap for reconnaissance prior to attacking systems, there are adminis- trators who become upset and may complain when their system is scanned. Thus, it is often advisable to request permission before doing even a light scan of a network. Nmap should never be installed with special privileges (e.g. suid root) for security reasons. Third-Party Software This product includes software developed by the Apache Software Founda- tion[14]. A modified version of the Libpcap portable packet capture li- brary[15] is distributed along with nmap. The Windows version of Nmap uti- lized the Libpcap-derived WinPcap library[16] instead. Regular expression support is provided by the PCRE library[17], which is open source software, written by Philip Hazel. Certain raw networking functions use the Libd- net[18] networking library, which was written by Dug Song. A modified ver- sion is distributed with Nmap. Nmap can optionally link with the OpenSSL cryptography toolkit[19] for SSL version detection support. The Nmap Scripting Engine uses an embedded version of the Lua programming lan- guage[20]. All of the third-party software described in this paragraph is freely redistributable under BSD-style software licenses. US Export Control Classification US Export Control: Insecure.Com LLC believes that Nmap falls under US ECCN (export control classification number) 5D992. This category is called "In- formation Security software not controlled by 5D002". The only restriction of this classification is AT (anti-terrorism), which applies to almost all goods and denies export to a handful of rogue nations such as Iran and North Korea. Thus exporting Nmap does not require any special license, per- mit, or other governmental authorization. AUTHOR Gordon "Fyodor" Lyon Insecure.Org Author. COPYRIGHT Copyright (C) 2008 Nmap Project NOTES 1. RFC 1122 http://www.rfc-editor.org/rfc/rfc1122.txt 2. RFC 792 http://www.rfc-editor.org/rfc/rfc792.txt 3. RFC 1918 http://www.rfc-editor.org/rfc/rfc1918.txt 4. UDP http://www.rfc-editor.org/rfc/rfc768.txt 5. TCP RFC http://www.rfc-editor.org/rfc/rfc793.txt 6. RFC 959 http://www.rfc-editor.org/rfc/rfc959.txt 7. RFC 1323 http://www.rfc-editor.org/rfc/rfc1323.txt 8. Lua http://lua.org 9. IP protocol http://www.rfc-editor.org/rfc/rfc791.txt 10. Nmap::Scanner http://sourceforge.net/projects/nmap-scanner/ 11. Nmap::Parser http://www.nmapparser.com 12. listed at Wikipedia http://en.wikipedia.org/wiki/List_of_IPv6_tunnel_brokers 13. Creative Commons Attribution License http://creativecommons.org/licenses/by/2.5/ 14. Apache Software Foundation http://www.apache.org 15. Libpcap portable packet capture library http://www.tcpdump.org 16. WinPcap library http://www.winpcap.org 17. PCRE library http://www.pcre.org 18. Libdnet http://libdnet.sourceforge.net 19. OpenSSL cryptography toolkit http://www.openssl.org 20. Lua programming language http://www.lua.org Insecure.Org Zero Day 06/29/2008 NMAP(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS SUMMARY | TARGET SPECIFICATION | HOST DISCOVERY | PORT SCANNING BASICS | PORT SCANNING TECHNIQUES | PORT SPECIFICATION AND SCAN ORDER | SERVICE AND VERSION DETECTION | OS DETECTION | NMAP SCRIPTING ENGINE (NSE) | TIMING AND PERFORMANCE | FIREWALL/IDS EVASION AND SPOOFING | OUTPUT | MISCELLANEOUS OPTIONS | RUNTIME INTERACTION | EXAMPLES | BUGS | AUTHOR | LEGAL NOTICES | AUTHOR | COPYRIGHT | NOTES
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=nmap&sektion=1&manpath=FreeBSD+7.1-RELEASE+and+Ports>