Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
CNW(4)			    Kernel Interfaces Manual			CNW(4)

NAME
       cnw -- Netwave AirSurfer	wireless network driver

SYNOPSIS
       device cnw

DESCRIPTION
       The  cnw	interface provides access to a theoretical 1Mb/s wireless Eth-
       ernet network based on the Netwave  AirSurfer  Wireless	LAN  (formerly
       known as	the Xircom Netwave Wireless LAN).

       Note that the driver does not support newer devices such	as the Netwave
       AirSurfer "Plus", or the	BayStack 650/660.  These devices are supported
       by the awi(4) driver.

       Netwave	devices	are not	compatible with	IEEE 802.11 wireless networks.
       Also note that there are	Netwave	devices	with different	wireless  fre-
       quency, depending on the	radio band plan	in each	country.

       The  card  uses	36K of I/O memory mapped to the	card.  You may need to
       increase	memory	space  available  to  the  PC  Card  controller.   See
       pccard(4) for details.

       In  use,	 the  cards  appear  to	achieve	up to a	420Kb/s	transfer rate,
       though a	transfer rate between 250Kb/s and 350Kb/s is typical.

       The card	operates in the	2.4GHz frequency range and is subject  to  in-
       terference  from	 microwaves,  IEEE 802.11 wireless network devices, as
       well as earth.  For example, it seems that IEEE 802.11 channel 14  con-
       flicts  with Netwave (US	frequency).  They interfere with each other if
       they are	both operated in the same  geographic  region,	causing	 weird
       packet  loss.   You  may	 be  able  to avoid the	interference with IEEE
       802.11 devices, by changing the IEEE 802.11 channel.

HARDWARE
       Cards supported by the cnw driver include:

          Xircom CreditCard Netwave
          NetWave AirSurfer

DIAGNOSTICS
       cnw0: can't map memory  Indicates that the driver was not able to allo-
       cate enough PC Card bus address space into which	 to  map  the  device.
       See pccard(4) and increase memory available to the PC Card controller.

SEE ALSO
       arp(4), awi(4), inet(4),	intro(4), pccard(4)

HISTORY
       The   cnw   driver   was	  ported   from	  NetBSD   by	Hiroyuki  Aizu
       <aizu@jaist.ac.jp>.  It	first  appeared	 in  NetBSD  1.4.   The	 first
       FreeBSD	release	 to  include it	was FreeBSD 5.0.  This manual page was
       adopted from NetBSD by Christian	Brueffer <brueffer@FreeBSD.org>.

FreeBSD	7.2		       September 5, 2004			CNW(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=cnw&manpath=FreeBSD+7.2-RELEASE>

home | help