home | help
MPT(4)			     Kernel Interfaces Manual			  MPT(4)

NAME
     mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device scbus
	   device mpt

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   mpt_load="YES"

DESCRIPTION
     The  mpt  driver  provides  support  for the LSI Logic Fusion-MPT family of
     SCSI, Fibre Channel and SAS controllers.

HARDWARE
     The following controllers are supported by the mpt driver:

     *	 LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
     *	 LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
     *	 LSI Logic FC909 (1Gb/s Fibre Channel)
     *	 LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
     *	 LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
     *	 LSI Logic FC929, LSI Logic FC929X,  LSI  Logic  7202XP-LC  (Dual  2Gb/s
	 Fibre Channel)
     *	 LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
     *	 LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express)

     The  Ultra  320  SCSI  controller	chips supported by the mpt driver can be
     found onboard on many systems including:

     *	 Dell PowerEdge 1750 thru 2850
     *	 IBM eServer xSeries 335

     These systems also contain Integrated Raid Mirroring  and	Integrated  Raid
     Mirroring Enhanced which this driver also supports.

     The  SAS  controller  chips  are also present on many new AMD/Opteron based
     systems, like the Sun 4100.  Note that this controller can drive  both  SAS
     and SATA drives or a mix of them at the same time. The Integrated Raid Mir-
     roring available for these controllers is poorly supported at best.

     The  Fibre  Channel  controller chipset are supported by a broad variety of
     speeds and systems.  The Apple Fibre Channel HBA is  in  fact  the  FC949ES
     card.

     This  driver  also supports target mode for Fibre Channel cards.  This sup-
     port may be enabled by setting the desired role of the  core  via	the  LSI
     Logic  firmware  utility that establishes what roles the card can take on -
     no separate compilation is required.

SEE ALSO
     cd(4), ch(4), da(4), pci(4), sa(4), scsi(4), targ(4)

     LSI Logic Website, http://www.lsilogic.com/.

HISTORY
     The mpt driver first appeared in FreeBSD 4.6.

AUTHORS
     The mpt driver was originally written for FreeBSD by Greg Ansley  and  mar-
     ginally improved upon by Matt Jacob <mjacob@FreeBSD.org>.

     Justin  Gibbs  <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have
     made more substantial improvements.

BUGS
FreeBSD 7.2			  April 6, 2007 			  MPT(4)

home | help