U3G(4) Kernel Interfaces Manual U3G(4) NAME u3g -- USB support for 3G datacards SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device u3g device ucom Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): u3g_load="YES" DESCRIPTION The u3g driver provides support for the multiple USB-to-serial interfaces exposed by many 3G USB/PCCard modems. The device is accessed through the ucom(4) driver which makes it behave like a tty(4). HARDWARE The u3g driver supports the following adapters: * Option GT 3G Fusion, GT Fusion Quad, etc. (only 3G part, not WLAN) * Option GT 3G, GT 3G Quad, etc. * Vodafone Mobile Connect Card 3G * Qualcomm Inc. CDMA MSM * Huawei B190, E220 ('<Huawei Mobile>') * Novatal U740, MC950D, X950D, etc. * Sierra MC875U, MC8775U, etc. (See /sys/dev/u3g.c for the complete list of supported cards for each ven- dor mentioned above.) The supported 3G cards provide the necessary modem port for ppp, pppd, or mpd connections as well as extra ports (depending on the specific device) to provide other functions (additional command port, diagnostic port, SIM toolkit port). In some of these devices a mass storage device supported by the umass(4) driver is present which contains Windows and Mac OS X drivers. The device starts up in disk mode (TruInstall, ZeroCD, etc.) and requires additional commands to switch it to modem mode. The u3gstub(4) device will attach temporarily to a 3G device with a mass storage device and force it to switch to modem mode, The attach and detach of u3gstub and any driver disk device present on the 3G device is is hid- den, unless the machine was booted in verbose mode (see boot(8)). To tem- porarily unhide the device, set debug.bootverbose to 1 using sysctl(8) and replug the device. SEE ALSO tty(4), ucom(4), usb(4) HISTORY The u3g driver appeared in FreeBSD 7.2, is based on the uark(4) driver, and written by Andrea Guzzo <aguzzo@anywi.com> in September 2008. AUTHORS The u3g driver was written by Andrea Guzzo <aguzzo@anywi.com> and Nick Hibma <n_hibma@freebsd.org>. Hardware for testing was provided by AnyWi Technologies, Leiden, NL. FreeBSD 7.2 October 7, 2008 U3G(4)
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=u3g&sektion=4&manpath=FreeBSD+7.2-RELEASE>