home | help
LESS(1) 		     General Commands Manual			 LESS(1)

NAME
     less - opposite of more

SYNOPSIS
     less -?
     less --help
     less -V
     less --version
     less [-[+]aBcCdeEfFgGiIJKLmMnNqQrRsSuUVwWX~]
	  [-b space] [-h lines] [-j line] [-k keyfile]
	  [-{oO} logfile] [-p pattern] [-P prompt] [-t tag]
	  [-T tagsfile] [-x tab,...] [-y lines] [-[z] lines]
	  [-# shift] [+[+]cmd] [--] [filename]...
     (See  the	OPTIONS  section  for  alternate  option syntax with long option
     names.)

DESCRIPTION
     Less is a program similar to more (1), but which allows  backward	movement
     in  the file as well as forward movement.	Also, less does not have to read
     the entire input file before starting, so with large input files it  starts
     up faster than text editors like vi (1).  Less uses termcap (or terminfo on
     some systems), so it can run on a variety of terminals.  There is even lim-
     ited  support for hardcopy terminals.  (On a hardcopy terminal, lines which
     should be printed at the top of the screen are prefixed with a caret.)

     Commands are based on both more and vi.  Commands may be preceded by a dec-
     imal number, called N in the descriptions below.  The  number  is	used  by
     some commands, as indicated.

COMMANDS
     In  the following descriptions, ^X means control-X.  ESC stands for the ES-
     CAPE key; for example ESC-v means the two character sequence "ESCAPE", then
     "v".

     h or H Help: display a summary of these commands.	If you	forget	all  the
	    other commands, remember this one.

     SPACE or ^V or f or ^F
	    Scroll  forward  N	lines, default one window (see option -z below).
	    If N is more than the screen size, only the final screenful is  dis-
	    played.   Warning:	some  systems use ^V as a special literalization
	    character.

     z	    Like SPACE, but if N is specified, it becomes the new window size.

     ESC-SPACE
	    Like SPACE, but scrolls a full screenful, even if it reaches end-of-
	    file in the process.

     RETURN or ^N or e or ^E or j or ^J
	    Scroll forward N lines, default 1.	The  entire  N	lines  are  dis-
	    played, even if N is more than the screen size.

     d or ^DScroll  forward  N lines, default one half of the screen size.  If N
	    is specified, it becomes the new default for subsequent d and u com-
	    mands.

     b or ^B or ESC-v
	    Scroll backward N lines, default one window (see option  -z  below).
	    If	N is more than the screen size, only the final screenful is dis-
	    played.

     w	    Like ESC-v, but if N is specified, it becomes the new window size.

     y or ^Y or ^P or k or ^K
	    Scroll backward N lines, default 1.  The entire  N	lines  are  dis-
	    played,  even if N is more than the screen size.  Warning: some sys-
	    tems use ^Y as a special job control character.

     u or ^UScroll backward N lines, default one half of the screen size.  If  N
	    is specified, it becomes the new default for subsequent d and u com-
	    mands.

     ESC-) or RIGHTARROW
	    Scroll  horizontally  right  N  characters,  default half the screen
	    width (see the -# option).	If a number N is specified,  it  becomes
	    the default for future RIGHTARROW and LEFTARROW commands.  While the
	    text  is scrolled, it acts as though the -S option (chop lines) were
	    in effect.

     ESC-( or LEFTARROW
	    Scroll horizontally left N characters, default half the screen width
	    (see the -# option).  If a number N is specified, it becomes the de-
	    fault for future RIGHTARROW and LEFTARROW commands.

     r or ^R or ^L
	    Repaint the screen.

     R	    Repaint the screen, discarding any buffered input.	 Useful  if  the
	    file is changing while it is being viewed.

     F	    Scroll  forward,  and  keep  trying  to read when the end of file is
	    reached.  Normally this command would be used when	already  at  the
	    end of the file.  It is a way to monitor the tail of a file which is
	    growing  while  it is being viewed.  (The behavior is similar to the
	    "tail -f" command.)

     g or < or ESC-<
	    Go to line N in the file, default 1 (beginning of file).   (Warning:
	    this may be slow if N is large.)

     G or > or ESC->
	    Go	to  line  N in the file, default the end of the file.  (Warning:
	    this may be slow if N is large, or if N is not specified  and  stan-
	    dard input, rather than a file, is being read.)

     p or % Go to a position N percent into the file.  N should be between 0 and
	    100, and may contain a decimal point.

     P	    Go to the line containing byte offset N in the file.

     {	    If	a  left  curly	bracket appears in the top line displayed on the
	    screen, the { command will go to the matching right  curly	bracket.
	    The matching right curly bracket is positioned on the bottom line of
	    the screen.  If there is more than one left curly bracket on the top
	    line,  a  number  N  may  be used to specify the N-th bracket on the
	    line.

     }	    If a right curly bracket appears in the bottom line displayed on the
	    screen, the } command will go to the matching  left  curly	bracket.
	    The matching left curly bracket is positioned on the top line of the
	    screen.   If  there  is more than one right curly bracket on the top
	    line, a number N may be used to specify  the  N-th	bracket  on  the
	    line.

     (	    Like {, but applies to parentheses rather than curly brackets.

     )	    Like }, but applies to parentheses rather than curly brackets.

     [	    Like {, but applies to square brackets rather than curly brackets.

     ]	    Like }, but applies to square brackets rather than curly brackets.

     ESC-^F Followed by two characters, acts like {, but uses the two characters
	    as open and close brackets, respectively.  For example, "ESC ^F < >"
	    could  be used to go forward to the > which matches the < in the top
	    displayed line.

     ESC-^B Followed by two characters, acts like }, but uses the two characters
	    as open and close brackets, respectively.  For example, "ESC ^B < >"
	    could be used to go backward to the < which matches  the  >  in  the
	    bottom displayed line.

     m	    Followed  by  any  lowercase letter, marks the current position with
	    that letter.

     '	    (Single quote.)  Followed by any lowercase letter,	returns  to  the
	    position  which was previously marked with that letter.  Followed by
	    another single quote, returns to the  position  at	which  the  last
	    "large"  movement command was executed.  Followed by a ^ or $, jumps
	    to the beginning or end of the file respectively.	Marks  are  pre-
	    served  when a new file is examined, so the ' command can be used to
	    switch between input files.

     ^X^X   Same as single quote.

     /pattern
	    Search forward in the file for the N-th line containing the pattern.
	    N defaults to 1.  The pattern is a regular expression, as recognized
	    by the regular expression library  supplied  by  your  system.   The
	    search  starts  at	the second line displayed (but see the -a and -j
	    options, which change this).

	    Certain characters are special if entered at the  beginning  of  the
	    pattern;  they  modify the type of search rather than become part of
	    the pattern:

	    ^N or !Search for lines which do NOT match the pattern.

	    ^E or *Search multiple files.  That is, if the  search  reaches  the
		   END	of  the current file without finding a match, the search
		   continues in the next file in the command line list.

	    ^F or @Begin the search at the first line of the FIRST file  in  the
		   command  line list, regardless of what is currently displayed
		   on the screen or the settings of the -a or -j options.

	    ^K	   Highlight any text which matches the pattern on  the  current
		   screen, but don't move to the first match (KEEP current posi-
		   tion).

	    ^R	   Don't  interpret  regular expression metacharacters; that is,
		   do a simple textual comparison.

     ?pattern
	    Search backward in the file for the N-th line  containing  the  pat-
	    tern.  The search starts at the line immediately before the top line
	    displayed.

	    Certain characters are special as in the / command:

	    ^N or !Search for lines which do NOT match the pattern.

	    ^E or *Search  multiple  files.   That is, if the search reaches the
		   beginning of the current file without finding  a  match,  the
		   search  continues  in  the  previous file in the command line
		   list.

	    ^F or @Begin the search at the last line of the  last  file  in  the
		   command  line list, regardless of what is currently displayed
		   on the screen or the settings of the -a or -j options.

	    ^K	   As in forward searches.

	    ^R	   As in forward searches.

     ESC-/pattern
	    Same as "/*".

     ESC-?pattern
	    Same as "?*".

     n	    Repeat previous search, for N-th line containing the  last	pattern.
	    If	the  previous  search was modified by ^N, the search is made for
	    the N-th line NOT containing the pattern.  If  the	previous  search
	    was  modified  by ^E, the search continues in the next (or previous)
	    file if not satisfied in the current file.	If the	previous  search
	    was modified by ^R, the search is done without using regular expres-
	    sions.  There is no effect if the previous search was modified by ^F
	    or ^K.

     N	    Repeat previous search, but in the reverse direction.

     ESC-n  Repeat previous search, but crossing file boundaries.  The effect is
	    as if the previous search were modified by *.

     ESC-N  Repeat  previous  search,  but in the reverse direction and crossing
	    file boundaries.

     ESC-u  Undo search highlighting.  Turn off highlighting of strings matching
	    the current search pattern.  If highlighting is already off  because
	    of	a previous ESC-u command, turn highlighting back on.  Any search
	    command will also turn highlighting back on.  (Highlighting can also
	    be disabled by toggling the -G option; in that case search	commands
	    do not turn highlighting back on.)

     &pattern
	    Display only lines which match the pattern; lines which do not match
	    the  pattern  are not displayed.  If pattern is empty (if you type &
	    immediately followed by ENTER), any filtering is turned off, and all
	    lines are displayed.  While filtering is in effect, an ampersand  is
	    displayed  at  the	beginning of the prompt, as a reminder that some
	    lines in the file may be hidden.

	    Certain characters are special as in the / command:

	    ^N or !Display only lines which do NOT match the pattern.

	    ^R	   Don't interpret regular expression metacharacters;  that  is,
		   do a simple textual comparison.

     :e [filename]
	    Examine  a new file.  If the filename is missing, the "current" file
	    (see the :n and :p commands below) from the list  of  files  in  the
	    command  line is re-examined.  A percent sign (%) in the filename is
	    replaced by the name of the current file.  A pound sign (#)  is  re-
	    placed  by	the  name of the previously examined file.  However, two
	    consecutive percent signs are simply replaced with a single  percent
	    sign.   This  allows you to enter a filename that contains a percent
	    sign in the name.  Similarly, two consecutive pound  signs	are  re-
	    placed  with a single pound sign.  The filename is inserted into the
	    command line list of files so that it can be seen by  subsequent  :n
	    and  :p  commands.	 If the filename consists of several files, they
	    are all inserted into the list of files and the first one  is  exam-
	    ined.  If the filename contains one or more spaces, the entire file-
	    name should be enclosed in double quotes (also see the -" option).

     ^X^V or E
	    Same  as  :e.  Warning: some systems use ^V as a special literaliza-
	    tion character.  On such systems, you may not be able to use ^V.

     :n     Examine the next file (from the list of files given in  the  command
	    line).  If a number N is specified, the N-th next file is examined.

     :p     Examine  the  previous file in the command line list.  If a number N
	    is specified, the N-th previous file is examined.

     :x     Examine the first file in the command line list.  If a number  N  is
	    specified, the N-th file in the list is examined.

     :d     Remove the current file from the list of files.

     t	    Go to the next tag, if there were more than one matches for the cur-
	    rent tag.  See the -t option for more details about tags.

     T	    Go	to the previous tag, if there were more than one matches for the
	    current tag.

     = or ^G or :f
	    Prints some information about the file being viewed,  including  its
	    name  and  the  line number and byte offset of the bottom line being
	    displayed.	If possible, it also prints the length of the file,  the
	    number  of	lines  in the file and the percent of the file above the
	    last displayed line.

     -	    Followed by one of the command line option letters (see OPTIONS  be-
	    low),  this  will change the setting of that option and print a mes-
	    sage describing the new setting.  If a ^P (CONTROL-P) is entered im-
	    mediately after the dash, the setting of the option is  changed  but
	    no	message  is  printed.	If the option letter has a numeric value
	    (such as -b or -h), or a string value (such as  -P	or  -t),  a  new
	    value  may	be  entered after the option letter.  If no new value is
	    entered, a message describing the current  setting	is  printed  and
	    nothing is changed.

     --     Like the - command, but takes a long option name (see OPTIONS below)
	    rather  than  a  single  option letter.  You must press RETURN after
	    typing the option name.  A ^P immediately after the second dash sup-
	    presses printing of a message describing the new setting, as in  the
	    - command.

     -+     Followed  by  one of the command line option letters this will reset
	    the option to its default setting and print a message describing the
	    new setting.  (The "-+X" command does the same thing as "-+X" on the
	    command line.)  This does not work for string-valued options.

     --+    Like the -+ command, but takes a long option name rather than a sin-
	    gle option letter.

     -!     Followed by one of the command line option letters, this will  reset
	    the option to the "opposite" of its default setting and print a mes-
	    sage  describing the new setting.  This does not work for numeric or
	    string-valued options.

     --!    Like the -! command, but takes a long option name rather than a sin-
	    gle option letter.

     _	    (Underscore.)  Followed by one of the command line	option	letters,
	    this will print a message describing the current setting of that op-
	    tion.  The setting of the option is not changed.

     __     (Double  underscore.)   Like the _ (underscore) command, but takes a
	    long option name rather than a single option letter.  You must press
	    RETURN after typing the option name.

     +cmd   Causes the specified cmd to be executed each time a new file is  ex-
	    amined.   For example, +G causes less to initially display each file
	    starting at the end rather than the beginning.

     V	    Prints the version number of less being run.

     q or Q or :q or :Q or ZZ
	    Exits less.

     The following four commands may or may not be valid, depending on your par-
     ticular installation.

     v	    Invokes an editor to edit the current file being viewed.  The editor
	    is taken from the environment variable VISUAL if defined, or  EDITOR
	    if	VISUAL is not defined, or defaults to "vi" if neither VISUAL nor
	    EDITOR is defined.	See also the discussion of  LESSEDIT  under  the
	    section on PROMPTS below.

     ! shell-command
	    Invokes  a shell to run the shell-command given.  A percent sign (%)
	    in the command is replaced by the name of the current file.  A pound
	    sign (#) is replaced by the name of the  previously  examined  file.
	    "!!" repeats the last shell command.  "!" with no shell command sim-
	    ply  invokes  a shell.  On Unix systems, the shell is taken from the
	    environment variable SHELL, or defaults to "sh".  On MS-DOS and OS/2
	    systems, the shell is the normal command processor.

     | <m> shell-command
	    <m> represents any mark letter.  Pipes a section of the  input  file
	    to	the given shell command.  The section of the file to be piped is
	    between the first line on the current screen and the position marked
	    by the letter.  <m> may also be ^ or $ to indicate beginning or  end
	    of file respectively.  If <m> is . or newline, the current screen is
	    piped.

     s filename
	    Save  the  input to a file.  This only works if the input is a pipe,
	    not an ordinary file.

OPTIONS
     Command line options are described below.	 Most  options	may  be  changed
     while less is running, via the "-" command.

     Most  options may be given in one of two forms: either a dash followed by a
     single letter, or two dashes followed by a long option name.  A long option
     name may be abbreviated as long as the abbreviation  is  unambiguous.   For
     example, --quit-at-eof may be abbreviated --quit, but not --qui, since both
     --quit-at-eof  and --quiet begin with --qui.  Some long option names are in
     uppercase, such as --QUIT-AT-EOF, as distinct from --quit-at-eof.	Such op-
     tion names need only have their first letter capitalized; the remainder  of
     the  name	may be in either case.	For example, --Quit-at-eof is equivalent
     to --QUIT-AT-EOF.

     Options are also taken from the environment variable "LESS".  For	example,
     to  avoid	typing	"less -options ..." each time less is invoked, you might
     tell csh:

     setenv LESS "-options"

     or if you use sh:

     LESS="-options"; export LESS

     On MS-DOS, you don't need the quotes, but you should  replace  any  percent
     signs in the options string by double percent signs.

     The environment variable is parsed before the command line, so command line
     options  override	the  LESS environment variable.  If an option appears in
     the LESS variable, it can be reset to its default value on the command line
     by beginning the command line option with "-+".

     For options like -P or -D which take a following string, a dollar sign  ($)
     must  be  used to signal the end of the string.  For example, to set two -D
     options on MS-DOS, you must have a dollar sign between them, like this:

     LESS="-Dn9.1$-Ds4.1"

     -? or --help
	    This option displays a summary of the commands accepted by less (the
	    same as the h command).  (Depending on how your shell interprets the
	    question mark, it may be necessary to quote the question mark, thus:
	    "-\?".)

     -a or --search-skip-screen
	    Causes searches to start  after  the  last	line  displayed  on  the
	    screen,  thus  skipping  all  lines displayed on the screen.  By de-
	    fault, searches start at the second line on the screen (or after the
	    last found line; see the -j option).

     -bn or --buffers=n
	    Specifies the amount of buffer space less will use for each file, in
	    units of kilobytes (1024 bytes).  By default 64K of buffer space  is
	    used  for  each file (unless the file is a pipe; see the -B option).
	    The -b option specifies instead that n  kilobytes  of  buffer  space
	    should  be	used  for each file.  If n is -1, buffer space is unlim-
	    ited; that is, the entire file can be read into memory.

     -B or --auto-buffers
	    By default, when data is read from a pipe, buffers are allocated au-
	    tomatically as needed.  If a large amount of data is read  from  the
	    pipe,  this can cause a large amount of memory to be allocated.  The
	    -B option disables this automatic allocation of buffers  for  pipes,
	    so that only 64K (or the amount of space specified by the -b option)
	    is	used  for  the pipe.  Warning: use of -B can result in erroneous
	    display, since only the most recently viewed part of the piped  data
	    is kept in memory; any earlier data is lost.

     -c or --clear-screen
	    Causes  full  screen  repaints to be painted from the top line down.
	    By default, full screen repaints are done by scrolling from the bot-
	    tom of the screen.

     -C or --CLEAR-SCREEN
	    Same as -c, for compatibility with older versions of less.

     -d or --dumb
	    The -d option suppresses the error message normally displayed if the
	    terminal is dumb; that is, lacks some important capability, such  as
	    the  ability  to clear the screen or scroll backward.  The -d option
	    does not otherwise change the behavior of less on a dumb terminal.

     -Dxcolor or --color=xcolor
	    [MS-DOS only] Sets the color of the text displayed.  x is  a  single
	    character  which  selects the type of text whose color is being set:
	    n=normal, s=standout, d=bold, u=underlined,  k=blink.   color  is  a
	    pair of numbers separated by a period.  The first number selects the
	    foreground	color and the second selects the background color of the
	    text.  A single number N is the same as N.M, where M is  the  normal
	    background color.

     -e or --quit-at-eof
	    Causes less to automatically exit the second time it reaches end-of-
	    file.  By default, the only way to exit less is via the "q" command.

     -E or --QUIT-AT-EOF
	    Causes  less to automatically exit the first time it reaches end-of-
	    file.

     -f or --force
	    Forces non-regular files to be opened.  (A non-regular file is a di-
	    rectory or a device special file.)	Also suppresses the warning mes-
	    sage when a binary file is opened.	By default, less will refuse  to
	    open  non-regular  files.  Note that some operating systems will not
	    allow directories to be read, even if -f is set.

     -F or --quit-if-one-screen
	    Causes less to automatically exit if the entire  file  can	be  dis-
	    played on the first screen.

     -g or --hilite-search
	    Normally,  less  will  highlight  ALL  strings  which match the last
	    search command.  The -g option changes this  behavior  to  highlight
	    only  the  particular string which was found by the last search com-
	    mand.  This can cause less to run somewhat faster than the default.

     -G or --HILITE-SEARCH
	    The -G option suppresses all highlighting of strings found by search
	    commands.

     -hn or --max-back-scroll=n
	    Specifies a maximum number of lines to scroll backward.   If  it  is
	    necessary  to  scroll  backward more than n lines, the screen is re-
	    painted in a forward direction instead.  (If the terminal  does  not
	    have the ability to scroll backward, -h0 is implied.)

     -i or --ignore-case
	    Causes searches to ignore case; that is, uppercase and lowercase are
	    considered	identical.  This option is ignored if any uppercase let-
	    ters appear in the search pattern; in other words, if a pattern con-
	    tains uppercase letters, then that search does not ignore case.

     -I or --IGNORE-CASE
	    Like -i, but searches ignore case even if the pattern  contains  up-
	    percase letters.

     -jn or --jump-target=n
	    Specifies  a line on the screen where the "target" line is to be po-
	    sitioned.  The target line is the line specified by any  command  to
	    search for a pattern, jump to a line number, jump to a file percent-
	    age or jump to a tag.  The screen line may be specified by a number:
	    the top line on the screen is 1, the next is 2, and so on.	The num-
	    ber  may be negative to specify a line relative to the bottom of the
	    screen: the bottom line on the screen is -1, the second to the  bot-
	    tom is -2, and so on.  Alternately, the screen line may be specified
	    as	a  fraction of the height of the screen, starting with a decimal
	    point: .5 is in the middle of the screen, .3 is  three  tenths  down
	    from the first line, and so on.  If the line is specified as a frac-
	    tion,  the actual line number is recalculated if the terminal window
	    is resized, so that the target line remains at the	specified  frac-
	    tion  of  the  screen height.  If any form of the -j option is used,
	    forward searches begin at the  line  immediately  after  the  target
	    line,  and backward searches begin at the target line.  For example,
	    if "-j4" is used, the target line is the fourth line on the  screen,
	    so forward searches begin at the fifth line on the screen.

     -J or --status-column
	    Displays a status column at the left edge of the screen.  The status
	    column  shows the lines that matched the current search.  The status
	    column is also used if the -w or -W option is in effect.

     -kfilename or --lesskey-file=filename
	    Causes less to open and interpret the named file as  a  lesskey  (1)
	    file.   Multiple  -k  options  may	be specified.  If the LESSKEY or
	    LESSKEY_SYSTEM environment variable is set, or if a lesskey file  is
	    found  in  a standard place (see KEY BINDINGS), it is also used as a
	    lesskey file.

     -K or --quit-on-intr
	    Causes less to exit immediately when an interrupt character (usually
	    ^C) is typed.  Normally, an interrupt character causes less to  stop
	    whatever  it  is  doing and return to its command prompt.  Note that
	    use of this option makes it impossible  to	return	to  the  command
	    prompt from the "F" command.

     -L or --no-lessopen
	    Ignore the LESSOPEN environment variable (see the INPUT PREPROCESSOR
	    section  below).   This  option  can be set from within less, but it
	    will apply only to files opened subsequently, not to the file  which
	    is currently open.

     -m or --long-prompt
	    Causes  less  to prompt verbosely (like more), with the percent into
	    the file.  By default, less prompts with a colon.

     -M or --LONG-PROMPT
	    Causes less to prompt even more verbosely than more.

     -n or --line-numbers
	    Suppresses line numbers.  The default  (to	use  line  numbers)  may
	    cause  less to run more slowly in some cases, especially with a very
	    large input file.  Suppressing line numbers with the -n option  will
	    avoid  this problem.  Using line numbers means: the line number will
	    be displayed in the verbose prompt and in the = command, and  the  v
	    command  will  pass  the current line number to the editor (see also
	    the discussion of LESSEDIT in PROMPTS below).

     -N or --LINE-NUMBERS
	    Causes a line number to be displayed at the beginning of  each  line
	    in the display.

     -ofilename or --log-file=filename
	    Causes  less  to  copy  its  input	to the named file as it is being
	    viewed.  This applies only when the input file is a pipe, not an or-
	    dinary file.  If the file already exists, less will ask for  confir-
	    mation before overwriting it.

     -Ofilename or --LOG-FILE=filename
	    The  -O  option  is  like -o, but it will overwrite an existing file
	    without asking for confirmation.

	    If no log file has been specified, the -o and -O options can be used
	    from within less to specify a log file.  Without a file  name,  they
	    will  simply  report  the  name of the log file.  The "s" command is
	    equivalent to specifying -o from within less.

     -ppattern or --pattern=pattern
	    The -p option on the command line is equivalent to specifying +/pat-
	    tern; that is, it tells less to start at  the  first  occurrence  of
	    pattern in the file.

     -Pprompt or --prompt=prompt
	    Provides a way to tailor the three prompt styles to your own prefer-
	    ence.   This  option  would  normally be put in the LESS environment
	    variable, rather than being typed in with each less  command.   Such
	    an option must either be the last option in the LESS variable, or be
	    terminated	by  a dollar sign.  -Ps followed by a string changes the
	    default (short) prompt to that string.  -Pm changes the medium  (-m)
	    prompt.   -PM  changes the long (-M) prompt.  -Ph changes the prompt
	    for the help screen.  -P= changes the message printed by the =  com-
	    mand.   -Pw  changes  the message printed while waiting for data (in
	    the F command).  All prompt strings consist of a sequence of letters
	    and special escape sequences.  See the section on PROMPTS  for  more
	    details.

     -q or --quiet or --silent
	    Causes  moderately	"quiet" operation: the terminal bell is not rung
	    if an attempt is made to scroll past the end of the file  or  before
	    the  beginning of the file.  If the terminal has a "visual bell", it
	    is used instead.  The bell will be rung  on  certain  other  errors,
	    such  as  typing  an  invalid character.  The default is to ring the
	    terminal bell in all such cases.

     -Q or --QUIET or --SILENT
	    Causes totally "quiet" operation: the terminal bell is never rung.

     -r or --raw-control-chars
	    Causes "raw" control characters to be displayed.  The default is  to
	    display  control characters using the caret notation; for example, a
	    control-A (octal 001) is displayed as "^A".  Warning:  when  the  -r
	    option  is	used, less cannot keep track of the actual appearance of
	    the screen (since this depends on how the screen  responds	to  each
	    type  of control character).  Thus, various display problems may re-
	    sult, such as long lines being split in the wrong place.

     -R or --RAW-CONTROL-CHARS
	    Like -r, but only ANSI "color" escape sequences are output in  "raw"
	    form.   Unlike  -r, the screen appearance is maintained correctly in
	    most cases.  ANSI "color" escape  sequences  are  sequences  of  the
	    form:

		 ESC [ ... m

	    where  the	"..." is zero or more color specification characters For
	    the purpose of keeping track of screen appearance, ANSI color escape
	    sequences are assumed to not move the cursor.   You  can  make  less
	    think  that  characters other than "m" can end ANSI color escape se-
	    quences by setting the environment variable LESSANSIENDCHARS to  the
	    list  of  characters which can end a color escape sequence.  And you
	    can make less think that characters other than the standard ones may
	    appear between the ESC and the m by setting the environment variable
	    LESSANSIMIDCHARS to the list of characters which can appear.

     -s or --squeeze-blank-lines
	    Causes consecutive blank lines to be squeezed into	a  single  blank
	    line.  This is useful when viewing nroff output.

     -S or --chop-long-lines
	    Causes  lines longer than the screen width to be chopped rather than
	    folded.  That is, the portion of a long line that does  not  fit  in
	    the  screen  width is not shown.  The default is to fold long lines;
	    that is, display the remainder on the next line.

     -ttag or --tag=tag
	    The -t option, followed immediately by a TAG,  will  edit  the  file
	    containing	that  tag.   For  this	to work, tag information must be
	    available; for example, there may be a file in the current directory
	    called "tags", which was previously built by ctags (1) or an equiva-
	    lent command.  If the environment variable LESSGLOBALTAGS is set, it
	    is taken to be the name of a command compatible with global (1), and
	    that   command   is   executed    to    find    the    tag.     (See
	    http://www.gnu.org/software/global/global.html).   The -t option may
	    also be specified from within less (using the - command) as a way of
	    examining a new file.  The command ":t" is equivalent to  specifying
	    -t from within less.

     -Ttagsfile or --tag-file=tagsfile
	    Specifies a tags file to be used instead of "tags".

     -u or --underline-special
	    Causes  backspaces	and  carriage returns to be treated as printable
	    characters; that is, they are sent to the terminal when they  appear
	    in the input.

     -U or --UNDERLINE-SPECIAL
	    Causes  backspaces,  tabs and carriage returns to be treated as con-
	    trol characters; that is, they are handled as specified  by  the  -r
	    option.

	    By	default,  if neither -u nor -U is given, backspaces which appear
	    adjacent to an underscore character are treated specially:	the  un-
	    derlined text is displayed using the terminal's hardware underlining
	    capability.   Also,  backspaces  which  appear between two identical
	    characters are treated specially: the overstruck text is printed us-
	    ing the terminal's hardware boldface capability.   Other  backspaces
	    are  deleted,  along with the preceding character.	Carriage returns
	    immediately followed by a newline are deleted.  other  carriage  re-
	    turns  are	handled  as  specified	by the -r option.  Text which is
	    overstruck or underlined can be searched for if neither -u nor -U is
	    in effect.

     -V or --version
	    Displays the version number of less.

     -w or --hilite-unread
	    Temporarily highlights the first "new" line after a forward movement
	    of a full page.  The first "new" line is the line  immediately  fol-
	    lowing  the line previously at the bottom of the screen.  Also high-
	    lights the target line after a g or p command.  The highlight is re-
	    moved at the next command which causes movement.  The entire line is
	    highlighted, unless the -J option is in effect, in which  case  only
	    the status column is highlighted.

     -W or --HILITE-UNREAD
	    Like  -w,  but  temporarily  highlights the first new line after any
	    forward movement command larger than one line.

     -xn,... or --tabs=n,...
	    Sets tab stops.  If only one n is specified, tab stops  are  set  at
	    multiples  of  n.  If multiple values separated by commas are speci-
	    fied, tab stops are set at those positions, and then  continue  with
	    the same spacing as the last two.  For example, -x9,17 will set tabs
	    at positions 9, 17, 25, 33, etc.  The default for n is 8.

     -X or --no-init
	    Disables  sending  the  termcap  initialization and deinitialization
	    strings to the terminal.  This is sometimes desirable if the  deini-
	    tialization  string  does  something  unnecessary, like clearing the
	    screen.

     -yn or --max-forw-scroll=n
	    Specifies a maximum number of lines to scroll  forward.   If  it  is
	    necessary  to  scroll  forward  more than n lines, the screen is re-
	    painted instead.  The -c or -C option may be used  to  repaint  from
	    the  top of the screen if desired.	By default, any forward movement
	    causes scrolling.

     -[z]n or --window=n
	    Changes the default scrolling window size to n lines.   The  default
	    is	one  screenful.  The z and w commands can also be used to change
	    the window size.  The "z" may be omitted for compatibility with some
	    versions of more.  If the number n is negative, it indicates n lines
	    less than the current screen size.	For example, if the screen is 24
	    lines, -z-4 sets the scrolling window to 20 lines.	If the screen is
	    resized to 40 lines, the scrolling window automatically  changes  to
	    36 lines.

     -"cc or --quotes=cc
	    Changes  the  filename  quoting character.	This may be necessary if
	    you are trying to name a file which contains both spaces  and  quote
	    characters.   Followed by a single character, this changes the quote
	    character to that character.  Filenames containing	a  space  should
	    then  be  surrounded by that character rather than by double quotes.
	    Followed by two characters, changes the  open  quote  to  the  first
	    character,	and  the close quote to the second character.  Filenames
	    containing a space should then be preceded by the open quote charac-
	    ter and followed by the close quote character.  Note that even after
	    the quote characters are changed, this option  remains  -"	(a  dash
	    followed by a double quote).

     -~ or --tilde
	    Normally  lines  after  end  of file are displayed as a single tilde
	    (~).  This option causes lines after end of file to be displayed  as
	    blank lines.

     -# or --shift
	    Specifies  the default number of positions to scroll horizontally in
	    the RIGHTARROW and LEFTARROW commands.  If the number  specified  is
	    zero,  it  sets  the  default number of positions to one half of the
	    screen width.  Alternately, the number may be specified as	a  frac-
	    tion  of  the width of the screen, starting with a decimal point: .5
	    is half of the screen width, .3 is three tenths of the screen width,
	    and so on.	If the number is specified as  a  fraction,  the  actual
	    number of scroll positions is recalculated if the terminal window is
	    resized, so that the actual scroll remains at the specified fraction
	    of the screen width.

     --no-keypad
	    Disables  sending  the  keypad  initialization  and deinitialization
	    strings to the terminal.  This is sometimes  useful  if  the  keypad
	    strings make the numeric keypad behave in an undesirable manner.

     --follow-name
	    Normally, if the input file is renamed while an F command is execut-
	    ing, less will continue to display the contents of the original file
	    despite its name change.  If --follow-name is specified, during an F
	    command  less  will periodically attempt to reopen the file by name.
	    If the reopen succeeds and the file is a  different  file  from  the
	    original (which means that a new file has been created with the same
	    name as the original (now renamed) file), less will display the con-
	    tents of that new file.

     --     A  command	line argument of "--" marks the end of option arguments.
	    Any arguments following this are interpreted as filenames.	This can
	    be useful when viewing a file whose name begins with a "-" or "+".

     +	    If a command line option begins with +, the remainder of that option
	    is taken to be an initial command to less.	For  example,  +G  tells
	    less  to start at the end of the file rather than the beginning, and
	    +/xyz tells it to start at the first  occurrence  of  "xyz"  in  the
	    file.   As	a special case, +<number> acts like +<number>g; that is,
	    it starts the display at the specified line number (however, see the
	    caveat under the "g" command above).  If the option starts with  ++,
	    the initial command applies to every file being viewed, not just the
	    first  one.   The + command described previously may also be used to
	    set (or change) an initial command for every file.

LINE EDITING
     When entering command line at the bottom of  the  screen  (for  example,  a
     filename  for the :e command, or the pattern for a search command), certain
     keys can be used to manipulate the command line.  Most commands have an al-
     ternate form in [ brackets ] which can be used if a key does not exist on a
     particular keyboard.  (Note that the forms beginning with ESC do  not  work
     in  some  MS-DOS  and Windows systems because ESC is the line erase charac-
     ter.)  Any of these special keys may be entered literally by  preceding  it
     with the "literal" character, either ^V or ^A.  A backslash itself may also
     be entered literally by entering two backslashes.

     LEFTARROW [ ESC-h ]
	    Move the cursor one space to the left.

     RIGHTARROW [ ESC-l ]
	    Move the cursor one space to the right.

     ^LEFTARROW [ ESC-b or ESC-LEFTARROW ]
	    (That  is,	CONTROL  and LEFTARROW simultaneously.)  Move the cursor
	    one word to the left.

     ^RIGHTARROW [ ESC-w or ESC-RIGHTARROW ]
	    (That is, CONTROL and RIGHTARROW simultaneously.)  Move  the  cursor
	    one word to the right.

     HOME [ ESC-0 ]
	    Move the cursor to the beginning of the line.

     END [ ESC-$ ]
	    Move the cursor to the end of the line.

     BACKSPACE
	    Delete  the  character to the left of the cursor, or cancel the com-
	    mand if the command line is empty.

     DELETE or [ ESC-x ]
	    Delete the character under the cursor.

     ^BACKSPACE [ ESC-BACKSPACE ]
	    (That is, CONTROL and BACKSPACE simultaneously.)  Delete the word to
	    the left of the cursor.

     ^DELETE [ ESC-X or ESC-DELETE ]
	    (That is, CONTROL and DELETE simultaneously.)  Delete the word under
	    the cursor.

     UPARROW [ ESC-k ]
	    Retrieve the previous command line.

     DOWNARROW [ ESC-j ]
	    Retrieve the next command line.

     TAB    Complete the partial filename to the left  of  the	cursor.   If  it
	    matches  more than one filename, the first match is entered into the
	    command line.  Repeated TABs will  cycle  thru  the  other	matching
	    filenames.	 If  the completed filename is a directory, a "/" is ap-
	    pended to the filename.  (On MS-DOS systems,  a  "\"  is  appended.)
	    The environment variable LESSSEPARATOR can be used to specify a dif-
	    ferent character to append to a directory name.

     BACKTAB [ ESC-TAB ]
	    Like,  TAB,  but  cycles  in the reverse direction thru the matching
	    filenames.

     ^L     Complete the partial filename to the left  of  the	cursor.   If  it
	    matches  more  than  one  filename, all matches are entered into the
	    command line (if they fit).

     ^U (Unix and OS/2) or ESC (MS-DOS)
	    Delete the entire command line, or cancel the command if the command
	    line is empty.  If you have changed your line-kill character in Unix
	    to something other than ^U, that character is used instead of ^U.

KEY BINDINGS
     You may define your own less commands by using the program lesskey  (1)  to
     create  a	lesskey  file.	This file specifies a set of command keys and an
     action associated with each key.  You may also use lesskey  to  change  the
     line-editing keys (see LINE EDITING), and to set environment variables.  If
     the  environment variable LESSKEY is set, less uses that as the name of the
     lesskey file.  Otherwise, less looks in a standard place  for  the  lesskey
     file:  On Unix systems, less looks for a lesskey file called "$HOME/.less".
     On MS-DOS and Windows  systems,  less  looks  for	a  lesskey  file  called
     "$HOME/_less",  and if it is not found there, then looks for a lesskey file
     called "_less" in any directory specified in the PATH environment variable.
     On OS/2 systems, less looks for a lesskey file called "$HOME/less.ini", and
     if it is not found, then looks for a lesskey file called "less.ini" in  any
     directory	specified  in the INIT environment variable, and if it not found
     there, then looks for a lesskey file called  "less.ini"  in  any  directory
     specified	in  the  PATH environment variable.  See the lesskey manual page
     for more details.

     A system-wide lesskey file may also be set up to provide key bindings.   If
     a	key is defined in both a local lesskey file and in the system-wide file,
     key bindings in the local file take precedence over those	in  the  system-
     wide  file.   If  the environment variable LESSKEY_SYSTEM is set, less uses
     that as the name of the system-wide lesskey file.	Otherwise, less looks in
     a standard place for the system-wide lesskey file:  On  Unix  systems,  the
     system-wide  lesskey file is /usr/local/etc/sysless.  (However, if less was
     built with a different sysconf directory than /usr/local/etc,  that  direc-
     tory  is  where the sysless file is found.)  On MS-DOS and Windows systems,
     the system-wide lesskey file is c:\_sysless.  On OS/2 systems, the  system-
     wide lesskey file is c:\sysless.ini.

INPUT PREPROCESSOR
     You may define an "input preprocessor" for less.  Before less opens a file,
     it  first gives your input preprocessor a chance to modify the way the con-
     tents of the file are displayed.  An input preprocessor is simply	an  exe-
     cutable program (or shell script), which writes the contents of the file to
     a	different  file,  called  the replacement file.  The contents of the re-
     placement file are then displayed in place of the contents of the	original
     file.   However,  it  will  appear  to  the user as if the original file is
     opened; that is, less will display the original filename as the name of the
     current file.

     An input preprocessor receives one  command  line	argument,  the	original
     filename,	as  entered by the user.  It should create the replacement file,
     and when finished, print the name of the replacement file to  its	standard
     output.   If the input preprocessor does not output a replacement filename,
     less uses the original file, as normal.   The  input  preprocessor  is  not
     called  when  viewing standard input.  To set up an input preprocessor, set
     the LESSOPEN environment variable to a command line which will invoke  your
     input preprocessor.  This command line should include one occurrence of the
     string  "%s",  which  will  be replaced by the filename when the input pre-
     processor command is invoked.

     When less closes a file opened in such a way, it will call another program,
     called the input postprocessor, which may perform any desired clean-up  ac-
     tion  (such  as  deleting	the replacement file created by LESSOPEN).  This
     program receives two command line arguments, the original filename  as  en-
     tered  by the user, and the name of the replacement file.	To set up an in-
     put postprocessor, set the LESSCLOSE environment variable to a command line
     which will invoke your input postprocessor.  It may include two occurrences
     of the string "%s"; the first is replaced with the  original  name  of  the
     file and the second with the name of the replacement file, which was output
     by LESSOPEN.

     For example, on many Unix systems, these two scripts will allow you to keep
     files in compressed format, but still let less view them directly:

     lessopen.sh:
	  #! /bin/sh
	  case "$1" in
	  *.Z) uncompress -
	       if [ -s /tmp/less.$$ ]; then
		    echo /tmp/less.$$
	       else
		    rm -f /tmp/less.$$
	       fi
	       ;;
	  esac

     lessclose.sh:
	  #! /bin/sh
	  rm $2

     To  use  these  scripts,  put  them both where they can be executed and set
     LESSOPEN="lessopen.sh %s", and LESSCLOSE="lessclose.sh %s %s".   More  com-
     plex LESSOPEN and LESSCLOSE scripts may be written to accept other types of
     compressed files, and so on.

     It  is  also possible to set up an input preprocessor to pipe the file data
     directly to less, rather than putting the data  into  a  replacement  file.
     This  avoids the need to decompress the entire file before starting to view
     it.  An input preprocessor that works this way is called an input pipe.  An
     input pipe, instead of writing the name of a replacement file on its  stan-
     dard  output,  writes  the  entire  contents of the replacement file on its
     standard output.  If the input pipe does not write any  characters  on  its
     standard output, then there is no replacement file and less uses the origi-
     nal file, as normal.  To use an input pipe, make the first character in the
     LESSOPEN  environment variable a vertical bar (|) to signify that the input
     preprocessor is an input pipe.

     For example, on many Unix systems, this script will work like the	previous
     example scripts:

     lesspipe.sh:
	  #! /bin/sh
	  case "$1" in
	  *.Z) uncompress -c $1  2>/dev/null
	       ;;
	  esac

     To   use	this   script,	 put  it  where  it  can  be  executed	and  set
     LESSOPEN="|lesspipe.sh %s".  When an input pipe is used, a LESSCLOSE  post-
     processor	can  be  used, but it is usually not necessary since there is no
     replacement file to clean up.  In this  case,  the  replacement  file  name
     passed to the LESSCLOSE postprocessor is "-".

     For compatibility with previous versions of less, the input preprocessor or
     pipe  is not used if less is viewing standard input.  However, if the first
     character of LESSOPEN is a dash (-), the  input  preprocessor  is	used  on
     standard  input as well as other files.  In this case, the dash is not con-
     sidered to be part of the preprocessor command.  If standard input is being
     viewed, the input preprocessor is passed a file name consisting of a single
     dash.  Similarly, if the first two characters of LESSOPEN are vertical  bar
     and  dash	(|-),  the input pipe is used on standard input as well as other
     files.  Again, in this case the dash is not considered to be  part  of  the
     input pipe command.

NATIONAL CHARACTER SETS
     There are three types of characters in the input file:

     normal characters
	    can be displayed directly to the screen.

     control characters
	    should  not  be  displayed directly, but are expected to be found in
	    ordinary text files (such as backspace and tab).

     binary characters
	    should not be displayed directly and are not expected to be found in
	    text files.

     A "character set" is simply a description of which  characters  are  to  be
     considered  normal, control, and binary.  The LESSCHARSET environment vari-
     able may be used to select a character  set.   Possible  values  for  LESS-
     CHARSET are:

     ascii  BS, TAB, NL, CR, and formfeed are control characters, all chars with
	    values between 32 and 126 are normal, and all others are binary.

     iso8859Selects  an  ISO 8859 character set.  This is the same as ASCII, ex-
	    cept characters between 160 and 255 are treated  as  normal  charac-
	    ters.

     latin1 Same as iso8859.

     latin9 Same as iso8859.

     dos    Selects a character set appropriate for MS-DOS.

     ebcdic Selects an EBCDIC character set.

     IBM-1047
	    Selects  an EBCDIC character set used by OS/390 Unix Services.  This
	    is the EBCDIC analogue of latin1.  You get similar results	by  set-
	    ting  either LESSCHARSET=IBM-1047 or LC_CTYPE=en_US in your environ-
	    ment.

     koi8-r Selects a Russian character set.

     next   Selects a character set appropriate for NeXT computers.

     utf-8  Selects the UTF-8 encoding of the ISO 10646 character set.	UTF-8 is
	    special in that it supports multi-byte characters in the input file.
	    It is the only character set that supports multi-byte characters.

     windowsSelects a character set appropriate for Microsoft Windows (cp 1251).

     In rare cases, it may be desired to tailor less  to  use  a  character  set
     other  than  the ones definable by LESSCHARSET.  In this case, the environ-
     ment variable LESSCHARDEF can be used to define a character set.  It should
     be set to a string where each character in the string represents one  char-
     acter in the character set.  The character "." is used for a normal charac-
     ter, "c" for control, and "b" for binary.	A decimal number may be used for
     repetition.   For example, "bccc4b." would mean character 0 is binary, 1, 2
     and 3 are control, 4, 5, 6 and 7 are binary, and 8 is normal.  All  charac-
     ters  after  the last are taken to be the same as the last, so characters 9
     through 255 would be normal.  (This is an example, and does not necessarily
     represent any real character set.)

     This table shows the value of LESSCHARDEF which is equivalent  to	each  of
     the possible values for LESSCHARSET:

	  ascii     8bcccbcc18b95.b
	  dos	    8bcccbcc12bc5b95.b.
	  ebcdic    5bc6bcc7bcc41b.9b7.9b5.b..8b6.10b6.b9.7b
		    9.8b8.17b3.3b9.7b9.8b8.6b10.b.b.b.
	  IBM-1047  4cbcbc3b9cbccbccbb4c6bcc5b3cbbc4bc4bccbc
		    191.b
	  iso8859   8bcccbcc18b95.33b.
	  koi8-r    8bcccbcc18b95.b128.
	  latin1    8bcccbcc18b95.33b.
	  next	    8bcccbcc18b95.bb125.bb

     If  neither  LESSCHARSET  nor  LESSCHARDEF  is  set, but any of the strings
     "UTF-8", "UTF8", "utf-8" or "utf8" is found in the LC_ALL, LC_TYPE or  LANG
     environment variables, then the default character set is utf-8.

     If  that string is not found, but your system supports the setlocale inter-
     face, less will use setlocale to determine the character set.  setlocale is
     controlled by setting the LANG or LC_CTYPE environment variables.

     Finally, if the setlocale interface is  also  not	available,  the  default
     character set is latin1.

     Control  and  binary  characters are displayed in standout (reverse video).
     Each such character is displayed in caret notation if possible (e.g. ^A for
     control-A).  Caret notation is used only if inverting the 0100 bit  results
     in  a normal printable character.	Otherwise, the character is displayed as
     a hex number in angle brackets.  This format can be changed by setting  the
     LESSBINFMT  environment  variable.  LESSBINFMT may begin with a "*" and one
     character to select the display attribute: "*k" is blinking, "*d" is  bold,
     "*u"  is  underlined,  "*s" is standout, and "*n" is normal.  If LESSBINFMT
     does not begin with a "*", normal attribute is assumed.  The  remainder  of
     LESSBINFMT  is  a string which may include one printf-style escape sequence
     (a % followed by x,  X,  o,  d,  etc.).   For  example,  if  LESSBINFMT  is
     "*u[%x]",	binary	characters  are displayed in underlined hexadecimal sur-
     rounded by  brackets.   The  default  if  no  LESSBINFMT  is  specified  is
     "*s<%X>".	 The default if no LESSBINFMT is specified is "*s<%02X>".  Warn-
     ing: the result of expanding the character via LESSBINFMT must be less than
     31 characters.

     When the character set is utf-8,  the  LESSUTFBINFMT  environment	variable
     acts  similarly  to  LESSBINFMT  but it applies to Unicode code points that
     were successfully decoded but are unsuitable for display (e.g.,  unassigned
     code  points).   Its default value is "<U+%04lX>".  Note that LESSUTFBINFMT
     and LESSBINFMT share their display attribute setting ("*x")  so  specifying
     one  will	affect	both; LESSUTFBINFMT is read after LESSBINFMT so its set-
     ting, if any, will have priority.	 Problematic  octets  in  a  UTF-8  file
     (octets of a truncated sequence, octets of a complete but non-shortest form
     sequence, illegal octets, and stray trailing octets) are displayed individ-
     ually using LESSBINFMT so as to facilitate diagnostic of how the UTF-8 file
     is ill-formed.

PROMPTS
     The  -P  option  allows  you  to tailor the prompt to your preference.  The
     string given to the -P option replaces the specified prompt  string.   Cer-
     tain characters in the string are interpreted specially.  The prompt mecha-
     nism  is  rather  complicated to provide flexibility, but the ordinary user
     need  not	understand  the  details  of  constructing  personalized  prompt
     strings.

     A percent sign followed by a single character is expanded according to what
     the following character is:

     %bX    Replaced  by  the byte offset into the current input file.	The b is
	    followed by a single character (shown as X	above)	which  specifies
	    the  line  whose  byte  offset is to be used.  If the character is a
	    "t", the byte offset of the top line in the display is used, an  "m"
	    means  use	the  middle line, a "b" means use the bottom line, a "B"
	    means use the line just after the bottom line, and a "j"  means  use
	    the "target" line, as specified by the -j option.

     %B     Replaced by the size of the current input file.

     %c     Replaced  by  the  column  number of the text appearing in the first
	    column of the screen.

     %dX    Replaced by the page number of a line in the input file.   The  line
	    to be used is determined by the X, as with the %b option.

     %D     Replaced  by the number of pages in the input file, or equivalently,
	    the page number of the last line in the input file.

     %E     Replaced by the name of the  editor  (from	the  VISUAL  environment
	    variable,  or  the	EDITOR environment variable if VISUAL is not de-
	    fined).  See the discussion of the LESSEDIT feature below.

     %f     Replaced by the name of the current input file.

     %i     Replaced by the index of the current  file	in  the  list  of  input
	    files.

     %lX    Replaced  by  the line number of a line in the input file.	The line
	    to be used is determined by the X, as with the %b option.

     %L     Replaced by the line number of the last line in the input file.

     %m     Replaced by the total number of input files.

     %pX    Replaced by the percent into the current input file, based	on  byte
	    offsets.   The  line  used is determined by the X as with the %b op-
	    tion.

     %PX    Replaced by the percent into the current input file, based	on  line
	    numbers.   The  line  used is determined by the X as with the %b op-
	    tion.

     %s     Same as %B.

     %t     Causes any trailing spaces to be removed.  Usually used at	the  end
	    of the string, but may appear anywhere.

     %x     Replaced by the name of the next input file in the list.

     If  any  item is unknown (for example, the file size if input is a pipe), a
     question mark is printed instead.

     The format of the prompt string can be changed depending on certain  condi-
     tions.   A  question mark followed by a single character acts like an "IF":
     depending on the following character, a condition	is  evaluated.	 If  the
     condition is true, any characters following the question mark and condition
     character, up to a period, are included in the prompt.  If the condition is
     false,  such  characters  are  not included.  A colon appearing between the
     question mark and the period can be used to establish an "ELSE": any  char-
     acters  between  the colon and the period are included in the string if and
     only if the IF condition is false.  Condition characters  (which  follow  a
     question mark) may be:

     ?a     True if any characters have been included in the prompt so far.

     ?bX    True if the byte offset of the specified line is known.

     ?B     True if the size of current input file is known.

     ?c     True if the text is horizontally shifted (%c is not zero).

     ?dX    True if the page number of the specified line is known.

     ?e     True if at end-of-file.

     ?f     True  if  there  is  an  input  filename (that is, if input is not a
	    pipe).

     ?lX    True if the line number of the specified line is known.

     ?L     True if the line number of the last line in the file is known.

     ?m     True if there is more than one input file.

     ?n     True if this is the first prompt in a new input file.

     ?pX    True if the percent into the current input file, based on byte  off-
	    sets, of the specified line is known.

     ?PX    True  if the percent into the current input file, based on line num-
	    bers, of the specified line is known.

     ?s     Same as "?B".

     ?x     True if there is a next input file (that is, if  the  current  input
	    file is not the last one).

     Any  characters  other than the special ones (question mark, colon, period,
     percent, and backslash) become literally part of the prompt.   Any  of  the
     special  characters may be included in the prompt literally by preceding it
     with a backslash.

     Some examples:

     ?f%f:Standard input.

     This prompt prints the filename, if known; otherwise the  string  "Standard
     input".

     ?f%f .?ltLine %lt:?pt%pt\%:?btByte %bt:-...

     This  prompt  would print the filename, if known.	The filename is followed
     by the line number, if known, otherwise the percent if known, otherwise the
     byte offset if known.  Otherwise, a dash is printed.  Notice how each ques-
     tion mark has a matching period, and how the % after the  %pt  is	included
     literally by escaping it with a backslash.

     ?n?f%f .?m(file %i of %m) ..?e(END) ?x- Next\: %x..%t

     This prints the filename if this is the first prompt in a file, followed by
     the  "file  N of N" message if there is more than one input file.	Then, if
     we are at end-of-file, the string "(END)" is printed followed by  the  name
     of  the next file, if there is one.  Finally, any trailing spaces are trun-
     cated.  This is the default prompt.  For reference, here are  the	defaults
     for  the  other  two prompts (-m and -M respectively).  Each is broken into
     two lines here for readability only.

     ?n?f%f .?m(file %i of %m) ..?e(END) ?x- Next\: %x.:
	  ?pB%pB\%:byte %bB?s/%s...%t

     ?f%f .?n?m(file %i of %m) ..?ltlines %lt-%lb?L/%L. :
	  byte %bB?s/%s. .?e(END) ?x- Next\: %x.:?pB%pB\%..%t

     And here is the default message produced by the = command:

     ?f%f .?m(file %i of %m) .?ltlines %lt-%lb?L/%L. .
	  byte %bB?s/%s. ?e(END) :?pB%pB\%..%t

     The prompt expansion features are also used for another purpose: if an  en-
     vironment variable LESSEDIT is defined, it is used as the command to be ex-
     ecuted  when  the v command is invoked.  The LESSEDIT string is expanded in
     the same way as the prompt strings.  The default value for LESSEDIT is:

	  %E ?lm+%lm. %f

     Note that this expands to the editor name, followed by a  +  and  the  line
     number,  followed	by  the  file  name.  If your editor does not accept the
     "+linenumber" syntax, or has other differences in	invocation  syntax,  the
     LESSEDIT variable can be changed to modify this default.

SECURITY
     When  the	environment variable LESSSECURE is set to 1, less runs in a "se-
     cure" mode.  This means these features are disabled:

	    !	   the shell command

	    |	   the pipe command

	    :e	   the examine command.

	    v	   the editing command

	    s  -o  log files

	    -k	   use of lesskey files

	    -t	   use of tags files

		   metacharacters in filenames, such as *

		   filename completion (TAB, ^L)

     Less can also be compiled to be permanently in "secure" mode.

COMPATIBILITY WITH MORE
     If the environment variable LESS_IS_MORE is set to 1, or if the program  is
     invoked  via a file link named "more", less behaves (mostly) in conformance
     with the POSIX "more" command specification.  In this  mode,  less  behaves
     differently in these ways:

     The -e option works differently.  If the -e option is not set, less behaves
     as  if the -E option were set.  If the -e option is set, less behaves as if
     the -e and -F options were set.

     The -m option works differently.  If the -m option is not set,  the  medium
     prompt  is  used, and it is prefixed with the string "--More--".  If the -m
     option is set, the short prompt is used.

     The -n option acts like the -z option.  The normal behavior of the  -n  op-
     tion is unavailable in this mode.

     The  parameter to the -p option is taken to be a less command rather than a
     search pattern.

     The LESS environment variable is ignored, and the MORE environment variable
     is used in its place.

ENVIRONMENT VARIABLES
     Environment variables may be specified either in the system environment  as
     usual,  or  in a lesskey (1) file.  If environment variables are defined in
     more than one place, variables defined in a local lesskey file take  prece-
     dence  over  variables defined in the system environment, which take prece-
     dence over variables defined in the system-wide lesskey file.

     COLUMNSSets the number of columns on the screen.  Takes precedence over the
	    number of columns specified by the TERM variable.  (But if you  have
	    a windowing system which supports TIOCGWINSZ or WIOCGETD, the window
	    system's idea of the screen size takes precedence over the LINES and
	    COLUMNS environment variables.)

     EDITOR The name of the editor (used for the v command).

     HOME   Name  of  the  user's home directory (used to find a lesskey file on
	    Unix and OS/2 systems).

     HOMEDRIVE, HOMEPATH
	    Concatenation of the HOMEDRIVE and HOMEPATH environment variables is
	    the name of the user's home directory if the HOME  variable  is  not
	    set (only in the Windows version).

     INIT   Name  of  the  user's init directory (used to find a lesskey file on
	    OS/2 systems).

     LANG   Language for determining the character set.

     LC_CTYPE
	    Language for determining the character set.

     LESS   Options which are passed to less automatically.

     LESSANSIENDCHARS
	    Characters which may end an  ANSI  color  escape  sequence	(default
	    "m").

     LESSANSIMIDCHARS
	    Characters	which  may  appear between the ESC character and the end
	    character	in   an   ANSI	 color	  escape    sequence	(default
	    "0123456789;[?!"'#%()*+ ".

     LESSBINFMT
	    Format for displaying non-printable, non-control characters.

     LESSCHARDEF
	    Defines a character set.

     LESSCHARSET
	    Selects a predefined character set.

     LESSCLOSE
	    Command line to invoke the (optional) input-postprocessor.

     LESSECHO
	    Name  of  the  lessecho  program (default "lessecho").  The lessecho
	    program is needed to expand metacharacters, such  as  *  and  ?,  in
	    filenames on Unix systems.

     LESSEDIT
	    Editor  prototype  string  (used for the v command).  See discussion
	    under PROMPTS.

     LESSGLOBALTAGS
	    Name of the command used by the -t option to find global tags.  Nor-
	    mally should be set to "global" if your system has	the  global  (1)
	    command.  If not set, global tags are not used.

     LESSHISTFILE
	    Name  of the history file used to remember search commands and shell
	    commands between invocations of less.  If set to "-" or "/dev/null",
	    a history file is not used.  The default is "$HOME/.lesshst" on Unix
	    systems,  "$HOME/_lesshst"	on   DOS   and	 Windows   systems,   or
	    "$HOME/lesshst.ini" or "$INIT/lesshst.ini" on OS/2 systems.

     LESSHISTSIZE
	    The maximum number of commands to save in the history file.  The de-
	    fault is 100.

     LESSKEYName of the default lesskey(1) file.

     LESSKEY_SYSTEM
	    Name of the default system-wide lesskey(1) file.

     LESSMETACHARS
	    List  of  characters  which  are  considered "metacharacters" by the
	    shell.

     LESSMETAESCAPE
	    Prefix which less will add before each metacharacter  in  a  command
	    sent  to  the shell.  If LESSMETAESCAPE is an empty string, commands
	    containing metacharacters will not be passed to the shell.

     LESSOPEN
	    Command line to invoke the (optional) input-preprocessor.

     LESSSECURE
	    Runs less in "secure" mode.  See discussion under SECURITY.

     LESSSEPARATOR
	    String to be appended to a directory name in filename completion.

     LESSUTFBINFMT
	    Format for displaying non-printable Unicode code points.

     LESS_IS_MORE
	    Emulate the more (1) command.

     LINES  Sets the number of lines on the screen.  Takes precedence  over  the
	    number  of lines specified by the TERM variable.  (But if you have a
	    windowing system which supports TIOCGWINSZ or WIOCGETD,  the  window
	    system's idea of the screen size takes precedence over the LINES and
	    COLUMNS environment variables.)

     PATH   User's  search  path (used to find a lesskey file on MS-DOS and OS/2
	    systems).

     SHELL  The shell used to execute the ! command, as well as to expand  file-
	    names.

     TERM   The type of terminal on which less is being run.

     VISUAL The name of the editor (used for the v command).

SEE ALSO
     lesskey(1)

COPYRIGHT
     Copyright (C) 1984-2009  Mark Nudelman

     less is part of the GNU project and is free software.  You can redistribute
     it  and/or  modify  it under the terms of either (1) the GNU General Public
     License as published by the Free Software Foundation; or (2) the  Less  Li-
     cense.   See  the file README in the less distribution for more details re-
     garding redistribution.  You should have received a copy of the GNU General
     Public License along with the source for less; see the  file  COPYING.   If
     not,  write  to  the  Free Software Foundation, 59 Temple Place, Suite 330,
     Boston, MA  02111-1307, USA.  You should also have received a copy  of  the
     Less License; see the file LICENSE.

     less  is  distributed  in	the hope that it will be useful, but WITHOUT ANY
     WARRANTY; without even the implied warranty of MERCHANTABILITY  or  FITNESS
     FOR  A PARTICULAR PURPOSE.  See the GNU General Public License for more de-
     tails.

AUTHOR
     Mark Nudelman <markn@greenwoodsoftware.com>
     See http://www.greenwoodsoftware.com/less/bugs.html for the latest list  of
     known bugs in less.
     Send bug reports or comments to the above address or to
     bug-less@gnu.org.
     For more information, see the less homepage at
     http://www.greenwoodsoftware.com/less.

			    Version 436: 07 Jul 2009			 LESS(1)

home | help