FreeBSD Manual Pages
FSTAB(5) File Formats Manual FSTAB(5) NAME fstab -- static information about the file systems SYNOPSIS #include <fstab.h> DESCRIPTION The file fstab contains descriptive information about the various file systems. fstab is only read by programs, and not written; it is the duty of the system administrator to properly create and maintain this file. Each file system is described on a separate line; fields on each line are separated by tabs or spaces. The order of records in fstab is important because fsck(8), mount(8), and umount(8) sequentially iterate through fstab doing their thing. The first field, (fs_spec), describes the special device or remote file system to be mounted. The second field, (fs_file), describes the mount point for the file system. For swap partitions, this field should be specified as ``none''. The third field, (fs_vfstype), describes the type of the file system. The system can support various file system types. Only the root, /usr, and /tmp file systems need be statically compiled into the kernel; everything else will be automatically loaded at mount time. (Excep- tion: the FFS cannot currently be demand-loaded.) Some people still prefer to statically compile other file systems as well. The fourth field, (fs_mntops), describes the mount options associated with the file system. It is formatted as a comma separated list of op- tions. It contains at least the type of mount (see fs_type below) plus any additional options appropriate to the file system type. See the options flag (-o) in the mount(8) page and the file system specific page, such as mount_nfs(8), for additional options that may be speci- fied. All options that can be given to the file system specific mount commands can be used in fstab as well. They just need to be formatted a bit differently. The arguments of the -o option can be used without the preceding -o flag. Other options need both the file system spe- cific flag and its argument, separated by an equal sign. For example, mounting an msdosfs(5) filesystem, the options -o sync -o noatime -m 644 -M 755 -u foo -g bar should be written as sync,noatime,-m=644,-M=755,-u=foo,-g=bar in the option field of fstab. If the options ``userquota'' and/or ``groupquota'' are specified, the file system is automatically processed by the quotacheck(8) command, and user and/or group disk quotas are enabled with quotaon(8). By de- fault, file system quotas are maintained in files named quota.user and quota.group which are located at the root of the associated file sys- tem. These defaults may be overridden by putting an equal sign and an alternative absolute pathname following the quota option. Thus, if the user quota file for /tmp is stored in /var/quotas/tmp.user, this loca- tion can be specified as: userquota=/var/quotas/tmp.user If the option ``noauto'' is specified, the file system will not be au- tomatically mounted at system startup. Note that, for network file systems of third party types (i.e., types supported by additional soft- ware not included in the base system) to be automatically mounted at system startup, the extra_netfs_types rc.conf(5) variable must be used to extend the rc(8) startup script's list of network file system types. The type of the mount is extracted from the fs_mntops field and stored separately in the fs_type field (it is not deleted from the fs_mntops field). If fs_type is ``rw'' or ``ro'' then the file system whose name is given in the fs_file field is normally mounted read-write or read- only on the specified special file. If fs_type is ``sw'' then the spe- cial file is made available as a piece of swap space by the swapon(8) command at the end of the system reboot procedure. The fields other than fs_spec and fs_type are unused. If fs_type is specified as ``xx'' the entry is ignored. This is useful to show disk partitions which are currently unused. The fifth field, (fs_freq), is used for these file systems by the dump(8) command to determine which file systems need to be dumped. If the fifth field is not present, a value of zero is returned and dump will assume that the file system does not need to be dumped. If the fifth field is greater than 0, then it specifies the number of days be- tween dumps for this file system. The sixth field, (fs_passno), is used by the fsck(8) and quotacheck(8) programs to determine the order in which file system and quota checks are done at reboot time. The fs_passno field can be any value between 0 and `INT_MAX-1'. The root file system should be specified with a fs_passno of 1, and other file systems should have a fs_passno of 2 or greater. A file system with a fs_passno value of 1 is always checked sequentially and be completed before another file system is processed, and it will be processed before all file systems with a larger fs_passno. For any given value of fs_passno, file systems within a drive will be checked sequentially, but file systems on different drives will be checked at the same time to utilize parallelism available in the hard- ware. Once all file system checks are complete for the current fs_passno, the same process will start over for the next fs_passno. If the sixth field is not present or is zero, a value of zero is re- turned and fsck(8) and quotacheck(8) will assume that the file system does not need to be checked. The fs_passno field can be used to implement finer control when the system utilities may determine that the file system resides on a dif- ferent physical device, when it actually does not, as with a ccd(4) de- vice. All file systems with a lower fs_passno value will be completed before starting on file systems with a higher fs_passno value. E.g. all file systems with a fs_passno of 2 will be completed before any file systems with a fs_passno of 3 or greater are started. Gaps are allowed between the different fs_passno values. E.g. file systems listed in /etc/fstab may have fs_passno values such as 0, 1, 2, 15, 100, 200, 300, and may appear in any order within /etc/fstab. #define FSTAB_RW "rw" /* read/write device */ #define FSTAB_RQ "rq" /* read/write with quotas */ #define FSTAB_RO "ro" /* read-only device */ #define FSTAB_SW "sw" /* swap device */ #define FSTAB_XX "xx" /* ignore totally */ struct fstab { char *fs_spec; /* block special device name */ char *fs_file; /* file system path prefix */ char *fs_vfstype; /* File system type, ufs, nfs */ char *fs_mntops; /* Mount options ala -o */ char *fs_type; /* FSTAB_* from fs_mntops */ int fs_freq; /* dump frequency, in days */ int fs_passno; /* pass number on parallel fsck */ }; The proper way to read records from fstab is to use the routines getfsent(3), getfsspec(3), getfstype(3), and getfsfile(3). FILES /etc/fstab The file fstab resides in /etc. SEE ALSO getfsent(3), getvfsbyname(3), ccd(4), dump(8), fsck(8), mount(8), quotacheck(8), quotaon(8), swapon(8), umount(8) HISTORY The fstab file format appeared in 4.0BSD. FreeBSD 8.0 November 23, 2008 FSTAB(5)
NAME | SYNOPSIS | DESCRIPTION | FILES | SEE ALSO | HISTORY
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=fstab&sektion=5&manpath=FreeBSD+8.0-RELEASE>