home | help
UNTITLED()			      LOCAL			      UNTITLED()

NAME
     iwn -- Intel Wireless WiFi Link 4965AGN IEEE 802.11n driver

SYNOPSIS
     To compile this driver into the kernel, include the following lines in your
     kernel configuration file:

	   device iwn
	   device iwnfw
	   device pci
	   device wlan
	   device firmware

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   if_iwn_load="YES"

DESCRIPTION
     The  iwn  driver provides support for Intel Wireless WiFi Link 4965AGN PCI-
     Express network adapters.	iwn supports station, adhoc,  and  monitor  mode
     operation.   Only one virtual interface may be configured at any time.  For
     more information on configuring this device, see ifconfig(8).

     This driver requires the firmware built with the iwnfw module to work.

EXAMPLES
     Join an existing BSS network (i.e., connect to an access point):

	   ifconfig wlan create wlandev iwn0 inet 192.168.0.20 \
	       netmask 0xffffff00

     Join a specific BSS network with network name "my_net":

	   ifconfig wlan create wlandev iwn0 ssid my_net up

     Join a specific BSS network with 64-bit WEP encryption:

	   ifconfig wlan create wlandev iwn0 ssid my_net \
		   wepmode on wepkey 0x1234567890 weptxkey 1 up

     Join a specific BSS network with 128-bit WEP encryption:

	   ifconfig wlan create wlandev iwn0 wlanmode adhoc ssid my_net \
	       wepmode on wepkey 0x01020304050607080910111213 weptxkey 1

DIAGNOSTICS
     iwn%d: device timeout  The driver will reset the hardware.  This should not
     happen.

     iwn%d: firmware error  The onboard microcontroller crashed for some reason.
     The driver will reset the hardware.  This should not happen.

     iwn%d: timeout waiting for firmware initialization to complete  The onboard
     microcontroller failed to initialize in time.  This should not happen.

     iwn%d: could not load firmware image '%s'	The driver failed  to  load  the
     firmware  image  using  the  firmware(9)  subsystem.   Verify  the iwnfw(4)
     firmware module is present.

     iwn%d: could not load boot firmware  An attempt to upload the boot firmware
     image to the onboard microcontroller failed.  This should not happen.

     iwn%d: could not load microcode  An attempt to upload the	microcode  image
     to the onboard microcontroller failed.  This should not happen.

     iwn%d: could not load main firmware  An attempt to upload the main firmware
     image to the onboard microcontroller failed.  This should not happen.

SEE ALSO
     iwnfw(4),	pci(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4), ifcon-
     fig(8), wpa_supplicant(8)

AUTHORS
     The   original   iwn   driver   was    written    by    Damien    Bergamini
     <damien.bergamini@free.fr>

FreeBSD 8.0			 April 13, 2008 			  IWN(4)

home | help