Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
UNTITLED()			     LOCAL			    UNTITLED()

NAME
       wpi -- Intel 3945ABG Wireless LAN IEEE 802.11 driver

SYNOPSIS
       To  compile  this  driver into the kernel, place	the following lines in
       your kernel configuration file:

	     device wpi
	     device wpifw
	     device pci
	     device wlan
	     device wlan_amrr
	     device firmware

       Alternatively, to load the driver as a module at	boot time,  place  the
       following line in loader.conf(5):

	     if_wpi_load="YES"

DESCRIPTION
       The  wpi	driver provides	support	for the	Intel 3945ABG Wireless network
       adapter wpi supports station, adhoc, and	monitor	mode operation.	  Only
       one virtual interface may be configured at any time.  For more informa-
       tion on configuring this	device,	see ifconfig(8).

       This driver requires the	firmware built with the	wpifw module to	work.

FILES
       /usr/share/doc/legal/intel_wpi/LICENSE  wpi firmware license

EXAMPLES
       Join an existing	BSS network (i.e., connect to an access	point):

	     ifconfig wlan0 create wlandev wpi0	inet 192.168.0.20 \
		 netmask 0xffffff00

       Join a specific BSS network with	network	name "my_net":

	     ifconfig wlan0 create wlandev wpi0	ssid my_net up

       Join a specific BSS network with	64-bit WEP encryption:

	     ifconfig wlan0 create wlandev wpi0	ssid my_net \
		     wepmode on	wepkey 0x1234567890 weptxkey 1 up

       Join a specific BSS network with	128-bit	WEP encryption:

	     ifconfig wlan0 create wlandev wpi0	wlanmode adhoc ssid my_net \
		 wepmode on wepkey 0x01020304050607080910111213	weptxkey 1

DIAGNOSTICS
       wpi%d:  could  not  load	firmware image '%s'  The driver	failed to load
       the firmware image using	the firmware(9)	subsystem.  Verify  the	 wpifw
       firmware	module is installed.

       wpi%d:  fatal  firmware error  An unknown error has occurred in the up-
       loaded firmware,	you may	have to	unload/reload the driver to continue.

       wpi%d: Radio transmitter	is switched off	 The hardware switch  control-
       ling  the radio is currently turned off.	 Data transmission is not pos-
       sible in	this state.

BUGS
       Not all the error messages are documented here.

       Background scanning is not currently supported.

SEE ALSO
       wpifw(4), pci(4),  wlan(4),  wlan_ccmp(4),  wlan_tkip(4),  wlan_wep(4),
       ifconfig(8), wpa_supplicant(8).

AUTHORS
       The  original  wpi  driver  was written for OpenBSD by Damien Bergamini
       <damien.bergamini@free.fr>.  Benjamin Close <benjsc@FreeBSD.org>	ported
       wpi to FreeBSD.

FreeBSD	8.1			October	5, 2008				WPI(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=wpi&sektion=4&manpath=FreeBSD+8.1-RELEASE>

home | help