UPLCOM(4) Kernel Interfaces Manual UPLCOM(4) NAME uplcom -- USB support for Prolific PL-2303/2303X/2303HX serial adapters driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device uplcom device ucom Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): uplcom_load="YES" DESCRIPTION The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips. The device is accessed through the ucom(4) driver which makes it behave like a tty(4). HARDWARE The uplcom driver supports the following adapters: * ATEN UC-232A * BAFO BF-800 * BAFO BF-810 * Belkin F5U257 * ELECOM UC-SGT * HAL Corporation Crossam2+USB IR commander * Hama USB RS-232 Serial Adapter * Hamlet exagerate XURS232 * IOGEAR UC-232A * I/O DATA USB-RSAQ * I/O DATA USB-RSAQ2 * I/O DATA USB-RSAQ3 * Mobile Action MA-620 Infrared Adapter * PLANEX USB-RS232 URS-03 * RATOC REX-USB60 * Radio Shack USB Serial Cable * Sandberg USB to Serial Link (model number 133-08) * SOURCENEXT KeikaiDenwa 8 (with and without charger) * Sony Ericsson USB Cable (Susteen USB Data Cable) * Willcom W-SIM DD PHS terminal.(WS002IN) SEE ALSO tty(4), ucom(4), usb(4) HISTORY The uplcom driver appeared in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002. FreeBSD 8.2 November 22, 2006 UPLCOM(4)
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=uplcom&sektion=4&manpath=FreeBSD+8.2-RELEASE>