TRM(4) Kernel Interfaces Manual TRM(4) NAME trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device scbus device trm Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): trm_load="YES" DESCRIPTION The trm driver supports PCI SCSI host adapters based on the Tekram TRM- S1040 SCSI ASIC. HARDWARE SCSI controllers supported by the trm driver include: * Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector * Tekram DC-315U PCI Ultra SCSI adapter without BIOS * Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector * Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS * Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS * Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver. SEE ALSO cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4) http://www.tekram.com/ AUTHORS The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard <cognet@FreeBSD.org>. FreeBSD 8.3 December 8, 2002 TRM(4)
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=trm&sektion=4&manpath=FreeBSD+8.3-RELEASE>