MMAP(2) System Calls Manual MMAP(2) NAME mmap -- allocate memory, or map files or devices into memory LIBRARY Standard C Library (libc, -lc) SYNOPSIS #include <sys/mman.h> void * mmap(void *addr, size_t len, int prot, int flags, int fd, off_t offset); DESCRIPTION The mmap() system call causes the pages starting at addr and continuing for at most len bytes to be mapped from the object described by fd, starting at byte offset offset. If len is not a multiple of the pagesize, the mapped region may extend past the specified range. Any such extension beyond the end of the mapped object will be zero-filled. If addr is non-zero, it is used as a hint to the system. (As a convenience to the system, the actual address of the region may differ from the address supplied.) If addr is zero, an address will be selected by the system. The actual starting address of the region is returned. A successful mmap deletes any previous mapping in the allocated address range. The protections (region accessibility) are specified in the prot argument by or'ing the following values: PROT_NONE Pages may not be accessed. PROT_READ Pages may be read. PROT_WRITE Pages may be written. PROT_EXEC Pages may be executed. The flags argument specifies the type of the mapped object, mapping options and whether modifications made to the mapped copy of the page are private to the process or are to be shared with other references. Sharing, mapping type and options are specified in the flags argument by or'ing the follow- ing values: MAP_ANON Map anonymous memory not associated with any specific file. The file descriptor used for creating MAP_ANON must be -1. The offset argument must be 0. MAP_ANONYMOUS This flag is identical to MAP_ANON and is provided for compatibility. MAP_FIXED Do not permit the system to select a different address than the one specified. If the specified address cannot be used, mmap() will fail. If MAP_FIXED is specified, addr must be a multiple of the pagesize. If a MAP_FIXED request is successful, the mapping established by mmap() replaces any previous mappings for the process' pages in the range from addr to addr + len. Use of this option is discouraged. MAP_HASSEMAPHORE Notify the kernel that the region may contain semaphores and that special handling may be necessary. MAP_INHERIT This flag never operated as advertised and is no longer supported. Please refer to minherit(2) for further in- formation. MAP_NOCORE Region is not included in a core file. MAP_NOSYNC Causes data dirtied via this VM map to be flushed to physical media only when necessary (usually by the pager) rather than gratuitously. Typically this prevents the update daemons from flushing pages dirtied through such maps and thus allows efficient sharing of memory across unassociated processes using a file-backed shared memory map. Without this option any VM pages you dirty may be flushed to disk every so often (every 30-60 seconds usu- ally) which can create performance problems if you do not need that to occur (such as when you are using shared file-backed mmap regions for IPC purposes). Note that VM/file system coherency is maintained whether you use MAP_NOSYNC or not. This option is not portable across Unix platforms (yet), though some may implement the same behavior by default. WARNING! Extending a file with ftruncate(2), thus creat- ing a big hole, and then filling the hole by modifying a shared mmap() can lead to severe file fragmentation. In order to avoid such fragmentation you should always pre- allocate the file's backing store by write()ing zero's into the newly extended area prior to modifying the area via your mmap(). The fragmentation problem is especially sensitive to MAP_NOSYNC pages, because pages may be flushed to disk in a totally random order. The same applies when using MAP_NOSYNC to implement a file-based shared memory store. It is recommended that you create the backing store by write()ing zero's to the backing file rather than ftruncate()ing it. You can test file fragmentation by observing the KB/t (kilobytes per transfer) results from an "iostat 1" while reading a large file sequentially, e.g. using "dd if=filename of=/dev/null bs=32k". The fsync(2) system call will flush all dirty data and metadata associated with a file, including dirty NOSYNC VM data, to physical media. The sync(8) command and sync(2) system call generally do not flush dirty NOSYNC VM data. The msync(2) system call is usually not needed since BSD implements a coherent file system buffer cache. However, it may be used to associate dirty VM pages with file system buffers and thus cause them to be flushed to physical media sooner rather than later. MAP_PREFAULT_READ Immediately update the calling process's lowest-level virtual address translation structures, such as its page table, so that every memory resident page within the re- gion is mapped for read access. Ordinarily these struc- tures are updated lazily. The effect of this option is to eliminate any soft faults that would otherwise occur on the initial read accesses to the region. Although this option does not preclude prot from including PROT_WRITE, it does not eliminate soft faults on the ini- tial write accesses to the region. MAP_PRIVATE Modifications are private. MAP_SHARED Modifications are shared. MAP_STACK MAP_STACK implies MAP_ANON, and offset of 0. The fd ar- gument must be -1 and prot must include at least PROT_READ and PROT_WRITE. This option creates a memory region that grows to at most len bytes in size, starting from the stack top and growing down. The stack top is the starting address returned by the call, plus len bytes. The bottom of the stack at maximum growth is the starting address returned by the call. The close(2) system call does not unmap pages, see munmap(2) for further information. The current design does not allow a process to specify the location of swap space. In the future we may define an additional mapping type, MAP_SWAP, in which the file descriptor argument specifies a file or device to which swapping should be done. NOTES Although this implementation does not impose any alignment restrictions on the offset argument, a portable program must only use page-aligned values. RETURN VALUES Upon successful completion, mmap() returns a pointer to the mapped region. Otherwise, a value of MAP_FAILED is returned and errno is set to indicate the error. ERRORS The mmap() system call will fail if: [EACCES] The flag PROT_READ was specified as part of the prot ar- gument and fd was not open for reading. The flags MAP_SHARED and PROT_WRITE were specified as part of the flags and prot argument and fd was not open for writing. [EBADF] The fd argument is not a valid open file descriptor. [EINVAL] MAP_FIXED was specified and the addr argument was not page aligned, or part of the desired address space re- sides out of the valid address space for a user process. [EINVAL] The len argument was equal to zero. [EINVAL] MAP_ANON was specified and the fd argument was not -1. [EINVAL] MAP_ANON was specified and the offset argument was not 0. [ENODEV] MAP_ANON has not been specified and fd did not reference a regular or character special file. [ENOMEM] MAP_FIXED was specified and the addr argument was not available. MAP_ANON was specified and insufficient mem- ory was available. SEE ALSO madvise(2), mincore(2), minherit(2), mlock(2), mprotect(2), msync(2), munlock(2), munmap(2), getpagesize(3) BUGS The len argument is limited to the maximum file size or available userland address space. Files may not be able to be made more than 1TB large on 32 bit systems due to file systems restrictions and bugs, but address space is far more restrictive. Larger files may be possible on 64 bit systems. The previous documented limit of 2GB was a documentation bug. That limit has not existed since FreeBSD 2.2. FreeBSD 8.4-stable March 18, 2012 MMAP(2)
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | NOTES | RETURN VALUES | ERRORS | SEE ALSO | BUGS
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=mmap&sektion=2&manpath=FreeBSD+8.4-RELEASE>