FreeBSD Manual Pages
TTY(4) Kernel Interfaces Manual TTY(4) NAME tty -- general terminal interface SYNOPSIS #include <sys/ioctl.h> DESCRIPTION This section describes the interface to the terminal drivers in the system. Terminal Special Files Each hardware terminal port on the system usually has a terminal spe- cial device file associated with it in the directory ``/dev/'' (for ex- ample, ``/dev/tty03''). When a user logs into the system on one of these hardware terminal ports, the system has already opened the asso- ciated device and prepared the line for normal interactive use (see getty(8).) There is also a special case of a terminal file that con- nects not to a hardware terminal port, but to another program on the other side. These special terminal devices are called ptys and provide the mechanism necessary to give users the same interface to the system when logging in over a network (using rlogin(1), or telnet(1) for exam- ple). Even in these cases the details of how the terminal file was opened and set up is already handled by special software in the system. Thus, users do not normally need to worry about the details of how these lines are opened or used. Also, these lines are often used for dialing out of a system (through an out-calling modem), but again the system provides programs that hide the details of accessing these ter- minal special files (see tip(1)). When an interactive user logs in, the system prepares the line to be- have in a certain way (called a line discipline), the particular de- tails of which is described in stty(1) at the command level, and in termios(4) at the programming level. A user may be concerned with changing settings associated with his particular login terminal and should refer to the preceding man pages for the common cases. The re- mainder of this man page is concerned with describing details of using and controlling terminal devices at a low level, such as that possibly required by a program wishing to provide features similar to those pro- vided by the system. Terminal File Operations All of the following operations are invoked using the ioctl(2) system call. Refer to that man page for a description of the request and argp parameters. In addition to the ioctl requests defined here, the spe- cific line discipline in effect will define other requests specific to it (actually termios(4) defines them as function calls, not ioctl requests.) The following section lists the available ioctl requests. The name of the request, a description of its purpose, and the typed argp parameter (if any) are listed. For example, the first entry says TIOCSPGRP int *tpgrp and would be called on the terminal associated with file descriptor zero by the following code fragment: int pgrp; pgrp = getpgrp(); ioctl(0, TIOCSPGRP, &pgrp); Terminal File Request Descriptions TIOCSETD int *ldisc This call is obsolete but left for compatibility. Before FreeBSD 8.0, it would change to the new line discipline pointed to by ldisc. TIOCGETD int *ldisc Return the current line discipline in the integer pointed to by ldisc. TIOCSBRK void Set the terminal hardware into BREAK condition. TIOCCBRK void Clear the terminal hardware BREAK condition. TIOCSDTR void Assert data terminal ready (DTR). TIOCCDTR void Clear data terminal ready (DTR). TIOCGPGRP int *tpgrp Return the current process group with which the terminal is associated in the integer pointed to by tpgrp. This is the underlying call that implements the termios(4) tcgetattr() call. TIOCSPGRP int *tpgrp Associate the terminal with the process group (as an inte- ger) pointed to by tpgrp. This is the underlying call that implements the termios(4) tcsetattr() call. TIOCGETA struct termios *term Place the current value of the termios state associated with the device in the termios structure pointed to by term. This is the underlying call that implements the termios(4) tcgetattr() call. TIOCSETA struct termios *term Set the termios state associated with the device immedi- ately. This is the underlying call that implements the termios(4) tcsetattr() call with the TCSANOW option. TIOCSETAW struct termios *term First wait for any output to complete, then set the termios state associated with the device. This is the underlying call that implements the termios(4) tcsetattr() call with the TCSADRAIN option. TIOCSETAF struct termios *term First wait for any output to complete, clear any pending input, then set the termios state associated with the de- vice. This is the underlying call that implements the termios(4) tcsetattr() call with the TCSAFLUSH option. TIOCOUTQ int *num Place the current number of characters in the output queue in the integer pointed to by num. TIOCSTI char *cp Simulate typed input. Pretend as if the terminal received the character pointed to by cp. TIOCNOTTY void This call is obsolete but left for compatibility. In the past, when a process that did not have a controlling termi- nal (see The Controlling Terminal in termios(4)) first opened a terminal device, it acquired that terminal as its controlling terminal. For some programs this was a hazard as they did not want a controlling terminal in the first place, and this provided a mechanism to disassociate the controlling terminal from the calling process. It must be called by opening the file /dev/tty and calling TIOCNOTTY on that file descriptor. The current system does not allocate a controlling terminal to a process on an open() call: there is a specific ioctl called TIOCSCTTY to make a terminal the controlling termi- nal. In addition, a program can fork() and call the setsid() system call which will place the process into its own session - which has the effect of disassociating it from the controlling terminal. This is the new and pre- ferred method for programs to lose their controlling termi- nal. TIOCSTOP void Stop output on the terminal (like typing ^S at the key- board). TIOCSTART void Start output on the terminal (like typing ^Q at the key- board). TIOCSCTTY void Make the terminal the controlling terminal for the process (the process must not currently have a controlling termi- nal). TIOCDRAIN void Wait until all output is drained. TIOCEXCL void Set exclusive use on the terminal. No further opens are permitted except by root. Of course, this means that pro- grams that are run by root (or setuid) will not obey the exclusive setting - which limits the usefulness of this feature. TIOCNXCL void Clear exclusive use of the terminal. Further opens are permitted. TIOCFLUSH int *what If the value of the int pointed to by what contains the FREAD bit as defined in <sys/file.h>, then all characters in the input queue are cleared. If it contains the FWRITE bit, then all characters in the output queue are cleared. If the value of the integer is zero, then it behaves as if both the FREAD and FWRITE bits were set (i.e., clears both queues). TIOCGWINSZ struct winsize *ws Put the window size information associated with the termi- nal in the winsize structure pointed to by ws. The window size structure contains the number of rows and columns (and pixels if appropriate) of the devices attached to the ter- minal. It is set by user software and is the means by which most full-screen oriented programs determine the screen size. The winsize structure is defined in <sys/ioctl.h>. TIOCSWINSZ struct winsize *ws Set the window size associated with the terminal to be the value in the winsize structure pointed to by ws (see above). TIOCCONS int *on If on points to a non-zero integer, redirect kernel console output (kernel printf's) to this terminal. If on points to a zero integer, redirect kernel console output back to the normal console. This is usually used on workstations to redirect kernel messages to a particular window. TIOCMSET int *state The integer pointed to by state contains bits that corre- spond to modem state. Following is a list of defined vari- ables and the modem state they represent: TIOCM_LE Line Enable. TIOCM_DTR Data Terminal Ready. TIOCM_RTS Request To Send. TIOCM_ST Secondary Transmit. TIOCM_SR Secondary Receive. TIOCM_CTS Clear To Send. TIOCM_CAR Carrier Detect. TIOCM_CD Carrier Detect (synonym). TIOCM_RNG Ring Indication. TIOCM_RI Ring Indication (synonym). TIOCM_DSR Data Set Ready. This call sets the terminal modem state to that represented by state. Not all terminals may support this. TIOCMGET int *state Return the current state of the terminal modem lines as represented above in the integer pointed to by state. TIOCMBIS int *state The bits in the integer pointed to by state represent modem state as described above, however the state is OR-ed in with the current state. TIOCMBIC int *state The bits in the integer pointed to by state represent modem state as described above, however each bit which is on in state is cleared in the terminal. IMPLEMENTATION NOTES The total number of input and output bytes through all terminal devices are available via the kern.tk_nin and kern.tk_nout read-only sysctl(8) variables. SEE ALSO stty(1), ioctl(2), ng_tty(4), pty(4), termios(4), getty(8) FreeBSD 8.4-stable December 26, 2009 TTY(4)
NAME | SYNOPSIS | DESCRIPTION | IMPLEMENTATION NOTES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=tty&sektion=4&manpath=FreeBSD+8.4-RELEASE>