FreeBSD Manual Pages
GPART(8) System Manager's Manual GPART(8) NAME gpart -- control utility for the disk partitioning GEOM class SYNOPSIS To add support for the disk partitioning GEOM class, place one or more of the following lines in your kernel configuration file: options GEOM_PART_APM options GEOM_PART_BSD options GEOM_PART_EBR options GEOM_PART_EBR_COMPAT options GEOM_PART_GPT options GEOM_PART_MBR options GEOM_PART_PC98 options GEOM_PART_VTOC8 The GEOM_PART_APM option adds support for the Apple Partition Map (APM) found on Apple Macintosh computers. The GEOM_PART_BSD option adds sup- port for the traditional BSD disklabel. The GEOM_PART_EBR option adds support for the Extended Boot Record (EBR), which is used to define a logical partition. The GEOM_PART_EBR_COMPAT option enables backward compatibility for partition names in the EBR scheme. Also it makes im- possible any types of actions with such partitions. The GEOM_PART_GPT option adds support for the GUID Partition Table (GPT) found on Intel Itanium computers and Intel-based Macintosh computers. The GEOM_PART_MBR option adds support for the Master Boot Record (MBR) found on PCs and used on many removable media. The GEOM_PART_PC98 op- tion adds support for the MBR variant as used on NEC PC-98 computers. The GEOM_PART_VTOC8 option adds support for Sun's SMI VTOC8 label as found on computers based on SPARC64 and UltraSPARC. Usage of the gpart utility: gpart add -t type [-a alignment] [-b start] [-s size] [-i index] [-l label] [-f flags] geom gpart backup geom gpart bootcode [-b bootcode] [-p partcode -i index] [-f flags] geom gpart commit geom gpart create -s scheme [-n entries] [-f flags] provider gpart delete -i index [-f flags] geom gpart destroy [-F] [-f flags] geom gpart modify -i index [-l label] [-t type] [-f flags] geom gpart recover [-f flags] geom gpart resize -i index [-a alignment] [-s size] [-f flags] geom gpart restore [-lF] [-f flags] provider [...] gpart set -a attrib -i index [-f flags] geom gpart show [-l | -r] [-p] [geom ...] gpart undo geom gpart unset -a attrib -i index [-f flags] geom DESCRIPTION The gpart utility is used to partition GEOM providers, normally disks. The first argument of which is the action to be taken: add Add a new partition to the partitioning scheme given by geom. The partition begins on the logical block address given by the -b start option. Its size is given by the -s size op- tion. SI unit suffixes are allowed. One or both -b and -s options can be omitted. If so they are automatically calcu- lated. The type of the partition is given by the -t type op- tion. Partition types are discussed below in the section en- titled "PARTITION TYPES". Additional options include: -a alignment If specified, then gpart utility tries to align start offset and partition size to be multiple of alignment value. -i index The index in the partition table at which the new partition is to be placed. The index de- termines the name of the device special file used to represent the partition. -l label The label attached to the partition. This op- tion is only valid when used on partitioning schemes that support partition labels. -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a dis- cussion about its use. backup Dump a partition table to standard output in special format used by restore action. bootcode Embed bootstrap code into the partitioning scheme's metadata on the geom (using -b bootcode) or write bootstrap code into a partition (using -p partcode and -i index). Not all parti- tioning schemes have embedded bootstrap code, so the -b bootcode option is scheme-specific in nature (see the section entitled "BOOTSTRAPPING" below). The -b bootcode option specifies a file that contains the bootstrap code. The con- tents and size of the file are determined by the partitioning scheme. The -p partcode option specifies a file that con- tains the bootstrap code intended to be written to a parti- tion. The partition is specified by the -i index option. The size of the file must be smaller than the size of the partition. Additional options include: -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. commit Commit any pending changes for geom geom. All actions are being committed by default and will not result in pending changes. Actions can be modified with the -f flags option so that they are not being committed by default. As such, they become pending. Pending changes are reflected by the geom and the gpart utility, but they are not actually written to disk. The commit action will write any and all pending changes to disk. create Create a new partitioning scheme on a provider given by provider. The -s scheme option determines the scheme to use. The kernel needs to have support for a particular scheme be- fore that scheme can be used to partition a disk. Additional options include: -n entries The number of entries in the partition table. Every partitioning scheme has a minimum and a maximum number of entries and this option allows tables to be created with the number of entries that lies anywhere between the minimum and the maximum. Some schemes have a maximum equal to the minimum and some schemes have a maximum large enough to be considered unlimited. By default, partition tables are created with the minimum number of entries. -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. delete Delete a partition from geom geom and further identified by the -i index option. The partition cannot be actively used by the kernel. Additional options include: -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. destroy Destroy the partitioning scheme as implemented by geom geom. Additional options include: -F Forced destroying of the partition table even if it is not empty. -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. modify Modify a partition from geom geom and further identified by the -i index option. Only the the type and/or label of the partition can be modified. To change the type of a parti- tion, specify the new type with the -t type option. To change the label of a partition, specify the new label with the -l label option. Not all partitioning schemes support labels and it is invalid to try to change a partition label in such cases. Additional options include: -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. recover Recover corrupt partition's scheme metadata on the geom geom. See the section entitled "RECOVERING" below for the addi- tional information. Additional options include: -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. resize Resize a partition from geom geom and further identified by the -i index option. New partition size is expressed in log- ical block numbers and can be given by the -s size option. If -s option is omitted then new size is automatically calcu- lated to maximum available from given geom geom. Additional options include: -a alignment If specified, then gpart utility tries to align partition size to be multiple of alignment value. -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a dis- cussion about its use. restore Restore the partition table from backup previously created by backup action and given from standard input. Only partition table may be restored. This action does not affect content of partitions. This mean that you should copy your data from backup after restoring partition table and write bootcode again if it is needed. Additional options include: -F Destroy partition table on the given provider be- fore doing restore. -l Restore partition labels for partitioning schemes that support them. -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. set Set the named attribute on the partition entry. See the sec- tion entitled "ATTRIBUTES" below for a list of available at- tributes. Additional options include: -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. show Show the current partition information of the specified geoms or all geoms if none are specified. Additional options in- clude: -l For partition schemes that support partition la- bels print them instead of partition type. -p Show provider names instead of partition indexes. -r Show raw partition type instead of symbolic name. undo Revert any pending changes for geom geom. This action is the opposite of the commit action and can be used to undo any changes that have not been committed. unset Clear the named attribute on the partition entry. See the section entitled "ATTRIBUTES" below for a list of available attributes. Additional options include: -f flags Additional operational flags. See the section entitled "OPERATIONAL FLAGS" below for a discus- sion about its use. PARTITION TYPES Partition types are identified on disk by particular strings or magic values. The gpart utility uses symbolic names for common partition types to avoid the user needing to know these values or other details of the partitioning scheme in question. The gpart utility also allows the user to specify scheme-specific partition types for partition types that do not have symbolic names. The symbolic names currently under- stood are: bios-boot The system partition dedicated to second stage of the boot loader program. Usually it used by GRUB 2 loader when the partition table is GPT. The scheme-specific type is "!21686148-6449-6E6F-744E-656564454649". efi The system partition for computers that use the Extensi- ble Firmware Interface (EFI). In such cases, the GPT partitioning scheme is being used and the actual parti- tion type for the system partition can also be specified as "!c12a7328-f81f-11d2-ba4b-00a0c93ec93ab". freebsd A FreeBSD partition that uses the BSD disklabel to sub- divide the partition into file systems. This is a legacy partition type and should not be used for the APM or GPT schemes. The scheme-specific types are "!165" for MBR, "!FreeBSD" for APM, and "!516e7cb4-6ecf-11d6-8ff8-00022d09712b" for GPT. freebsd-boot A FreeBSD partition dedicated to bootstrap code. The scheme-specific type is "!83bd6b9d-7f41-11dc-be0b-001560b84f0f" for GPT. freebsd-swap A FreeBSD partition dedicated to swap space. The scheme-specific types are "!FreeBSD-swap" for APM, "!516e7cb5-6ecf-11d6-8ff8-00022d09712b" for GPT, and tag 0x0901 for VTOC8. freebsd-ufs A FreeBSD partition that contains a UFS or UFS2 file system. The scheme-specific types are "!FreeBSD-UFS" for APM, "!516e7cb6-6ecf-11d6-8ff8-00022d09712b" for GPT, and tag 0x0902 for VTOC8. freebsd-vinum A FreeBSD partition that contains a Vinum volume. The scheme-specific types are "!FreeBSD-Vinum" for APM, "!516e7cb8-6ecf-11d6-8ff8-00022d09712b" for GPT, and tag 0x0903 for VTOC8. freebsd-zfs A FreeBSD partition that contains a ZFS volume. The scheme-specific types are "!FreeBSD-ZFS" for APM, "!516e7cba-6ecf-11d6-8ff8-00022d09712b" for GPT, and 0x0904 for VTOC8. mbr A partition that is sub-partitioned by a master boot record (MBR). This type is known as "!024dee41-33e7-11d3-9d69-0008c781f39f" by GPT. ATTRIBUTES The scheme-specific attributes for EBR: active The scheme-specific attributes for GPT: bootme When set, the gptboot stage 1 boot loader will try to boot the system from this partition. Multiple partitions might be marked with the bootme attribute. In such scenario the gptboot will try all bootme partitions one by one, until the next boot stage is successfully entered. bootonce Setting this attribute automatically sets the bootme at- tribute. When set, the gptboot stage 1 boot loader will try to boot the system from this partition only once. Par- titions with both bootonce and bootme attributes are tried before partitions with only the bootme attribute. Before bootonce partition is tried, the gptboot removes the bootme attribute and tries to execute the next boot stage. If it fails, the bootonce attribute that is now alone is replaced with the bootfailed attribute. If the execution of the next boot stage succeeds, but the system is not fully booted, the gptboot will look for bootonce attributes alone (without the bootme attribute) on the next system boot and will replace those with the bootfailed attribute. If the system is fully booted, the /etc/rc.d/gptboot start-up script will look for partition with the bootonce attribute alone, will remove the attribute and log that the system was successfully booted from this partition. There should be at most one bootonce partition when system is success- fully booted. Multiple partitions might be marked with the bootonce and bootme attribute pairs. bootfailed This attribute should not be manually managed. It is man- aged by the gptboot stage 1 boot loader and the /etc/rc.d/gptboot start-up script. This attribute is used to mark partitions that had the bootonce attribute set, but we failed to boot from them. Once we successfully boot, the /etc/rc.d/gptboot script will log all the partitions we failed to boot from and will remove the bootfailed attrib- utes. The scheme-specific attributes for MBR: active The scheme-specific attributes for PC98: active bootable BOOTSTRAPPING FreeBSD supports several partitioning schemes and each scheme uses dif- ferent bootstrap code. The bootstrap code is located in the specific disk area for each partitioning scheme and also it might have different size. The bootstrap code could be separated into two types. The first one is embedded in the partitioning scheme's metadata, the second type is lo- cated on the specific partition. The embedding bootstrap code should be done only with the gpart bootcode command with -b bootcode option. The GEOM PART class has knowlege on how to embed bootstrap code into specific partitioning scheme metadata without damage. The Master Boot Record (MBR) uses 512-bytes bootstrap code image, em- bedded into partition table's metadata area. There are two variants of this bootstrap code: /boot/mbr and /boot/boot0. The first one searches partition with active attribute (see the "ATTRIBUTES" section) in the partition table. Then it runs next bootstrap stage. The /boot/boot0 image contains a boot manager with some additional interactive func- tions. The BSD disklabel is usually created on top of the MBR partition (slice) with type freebsd (see the "PARTITION TYPES" section). It uses 8 KB size bootstrap code image /boot/boot, embedded into partition ta- ble's metadata area. Both types of bootstrap code are used to boot from the GUID Partition Table. First of all, a protective MBR is embedded into first disk sec- tor from the /boot/pmbr image. It searches the freebsd-boot partition (see the "PARTITION TYPES" section) in the GPT and runs next bootstrap stage from it. The freebsd-boot partition should be smaller than 545 KB. There are two variants of bootstrap code to write to this parti- tion: /boot/gptboot and /boot/gptzfsboot. The first one is used to boot from UFS. It searches in the GPT partition with type freebsd-ufs, and it runs the third bootstrap stage ( /boot/loader) if it is found. The /boot/gptzfsboot is used to boot from ZFS. It searches partition with type freebsd-zfs and starts /boot/zfsloader from it. The VTOC8 scheme does not support embedding bootstrap code. Instead, the 8 KBytes bootstrap code image /boot/boot1 should be written with gpart bootcode command with -p bootcode option to all sufficiently large VTOC8 partitions. To do this the -i index option could be om- mited. The APM scheme also does not support embedding bootstrap code. In- stead, the 800 KBytes bootstrap code image /boot/boot1.hfs should be written with gpart bootcode command to a partition of type freebsd-boot, which should also be 800 KB in size. OPERATIONAL FLAGS Actions other than the commit and undo actions take an optional -f flags option. This option is used to specify action-specific opera- tional flags. By default, the gpart utility defines the `C' flag so that the action is immediately committed. The user can specify "-f x" to have the action result in a pending change that can later, with other pending changes, be committed as a single compound change with the commit action or reverted with the undo action. RECOVERING The GEOM PART class supports recovering of partition tables only for GPT. The GUID partition table has a primary and secondary (backup) copy of metadata for redundance, these are stored at the begining and the end of the device respectively. As a result of having two copies, it is acceptable to have some corruption within the metadata that is not fatal to the working of GPT. When the kernel detects corrupt meta- data it marks this table as corrupt and reports the corruption. Any operations on corrupt tables are prohibited except for destroy and recover. If the first sector of a provider is corrupt, the kernel can not detect GPT even if partition table itself is not corrupt. You can rewrite the protective MBR using the dd(1) command, to restore the ability to de- tect the GPT. The copy of the protective MBR is usually located in the /boot/pmbr file. If one GPT header appears to be corrupt but the other copy remains in- tact, the kernel will log the following: GEOM: provider: the primary GPT table is corrupt or invalid. GEOM: provider: using the secondary instead -- recovery strongly advised. or GEOM: provider: the secondary GPT table is corrupt or invalid. GEOM: provider: using the primary only -- recovery suggested. Also gpart commands such as show, status and list will report about corrupt tables. If the size of the device has changed (e.g. volume expansion) the sec- ondary GPT header will no longer be located in the last sector. This is not a metadata corruption, but it is dangerous because any corrup- tion of the primary GPT will lead to loss of partition table. This problem is reported by the kernel with the message: GEOM: provider: the secondary GPT header is not in the last LBA. This situation can be recovered with the recover command. This command reconstructs the corrupt metadata using known valid metadata and relo- cates the secondary GPT to the end of the device. NOTE: The GEOM PART class can detect the same partition table visible through different GEOM providers, and some of them will be marked as corrupt. Be careful when choosing a provider for recovery. If you choose incorrectly you can destroy the metadata of another GEOM class, e.g. GEOM MIRROR or GEOM LABEL. SYSCTL VARIABLES The following sysctl(8) variables can be used to control the behavior of the PART GEOM class. The default value is shown next to each vari- able. kern.geom.part.check_integrity: 1 This variable controls the behaviour of metadata integrity checks. When integrity checks are enabled, the PART GEOM class verifies all generic partition parameters obtained from the disk metadata. If some inconsistency is detected, the parti- tion table will be rejected with a diagnostic message: GEOM_PART: Integrity check failed (provider, scheme). EXIT STATUS Exit status is 0 on success, and 1 if the command fails. EXAMPLES Create GPT scheme on ad0: /sbin/gpart create -s GPT ad0 Embed GPT bootstrap code into protective MBR: /sbin/gpart bootcode -b /boot/pmbr ad0 Create a dedicated freebsd-boot partition that can boot FreeBSD from a freebsd-ufs partition, and install bootstrap code into it. This parti- tion must be larger than /boot/gptboot, or the GPT boot you are plan- ning to write, but smaller than 545 KB. A size of 15 blocks (7680 bytes) would be sufficient for booting from UFS but let's use 128 blocks (64 KB) here in this example, in order to reserve some space for potential future need (e.g. from a ZFS partition). /sbin/gpart add -b 34 -s 128 -t freebsd-boot ad0 /sbin/gpart bootcode -p /boot/gptboot -i 1 ad0 Create a 512MB-sized freebsd-ufs partition that would contain UFS where the system boots from: /sbin/gpart add -b 162 -s 1048576 -t freebsd-ufs ad0 Create MBR scheme on ada0, then create 30GB-sized FreeBSD slice, mark it active and install boot0 boot manager: /sbin/gpart create -s MBR ada0 /sbin/gpart add -t freebsd -s 30G ada0 /sbin/gpart set -a active -i 1 ada0 /sbin/gpart bootcode -b /boot/boot0 ada0 Now create BSD scheme (BSD label) with ability to have up to 20 parti- tions: /sbin/gpart create -s BSD -n 20 ada0s1 Create 1GB-sized UFS partition and 4GB-sized swap partition: /sbin/gpart add -t freebsd-ufs -s 1G ada0s1 /sbin/gpart add -t freebsd-swap -s 4G ada0s1 Install bootstrap code for the BSD label: /sbin/gpart bootcode -b /boot/boot ada0s1 Create VTOC8 scheme on da0: /sbin/gpart create -s VTOC8 da0 Create a 512MB-sized freebsd-ufs partition that would contain UFS where the system boots from: /sbin/gpart add -s 512M -t freebsd-ufs da0 Create a 15GB-sized freebsd-ufs partition that would contain UFS and aligned on 4KB boundaries: /sbin/gpart add -s 15G -t freebsd-ufs -a 4k da0 After having created all required partitions, embed bootstrap code into them: /sbin/gpart bootcode -p /boot/boot1 da0 Create backup of partition table from da0: /sbin/gpart backup da0 > da0.backup Restore partition table from backup to da0: /sbin/gpart restore -l da0 < /mnt/da0.backup Clone partition table from ada0 to ada1 and ada2: /sbin/gpart backup ada0 | /sbin/gpart restore -F ada1 ada2 SEE ALSO dd(1), geom(4), boot0cfg(8), geom(8) HISTORY The gpart utility appeared in FreeBSD 7.0. AUTHORS Marcel Moolenaar <marcel@FreeBSD.org> FreeBSD 9.0 August 19, 2011 GPART(8)
NAME | SYNOPSIS | DESCRIPTION | PARTITION TYPES | ATTRIBUTES | BOOTSTRAPPING | OPERATIONAL FLAGS | RECOVERING | SYSCTL VARIABLES | EXIT STATUS | EXAMPLES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gpart&manpath=FreeBSD+9.0-RELEASE>