zfs(1M) System Administration Commands zfs(1M) NAME zfs - configures ZFS file systems SYNOPSIS zfs [-?] zfs create [-p] [-o property=value] ... filesystem zfs create [-ps] [-b blocksize] [-o property=value] ... -V size volume zfs destroy [-rRf] filesystem|volume zfs destroy [-rRd] snapshot zfs snapshot [-r] [-o property=value]... filesystem@snapname|volume@snapname zfs rollback [-rRf] snapshot zfs clone [-p] [-o property=value] ... snapshot filesystem|volume zfs promote clone-filesystem zfs rename filesystem|volume|snapshot filesystem|volume|snapshot zfs rename [-p] filesystem|volume filesystem|volume zfs rename -r snapshot snapshot zfs list [-r|-d depth][-H][-o property[,...]] [-t type[,...]] [-s property] ... [-S property] ... [filesystem|volume|snapshot] ... zfs set property=value filesystem|volume|snapshot ... zfs get [-r|-d depth][-Hp][-o field[,...]] [-s source[,...]] "all" | property[,...] filesystem|volume|snapshot ... zfs inherit [-r] property filesystem|volume|snapshot ... zfs upgrade [-v] zfs upgrade [-r] [-V version] -a | filesystem zfs userspace [-niHp] [-o field[,...]] [-sS field] ... [-t type [,...]] filesystem|snapshot zfs groupspace [-niHp] [-o field[,...]] [-sS field] ... [-t type [,...]] filesystem|snapshot zfs mount zfs mount [-vO] [-o options] -a | filesystem zfs unmount [-f] -a | filesystem|mountpoint zfs share -a | filesystem zfs unshare -a filesystem|mountpoint zfs send [-vR] [-[iI] snapshot] snapshot zfs receive [-vnFu] filesystem|volume|snapshot zfs receive [-vnFu] -d filesystem zfs allow filesystem|volume zfs allow [-ldug] "everyone"|user|group[,...] perm|@setname[,...] filesystem|volume zfs allow [-ld] -e perm|@setname[,...] filesystem|volume zfs allow -c perm|@setname[,...] filesystem|volume zfs allow -s @setname perm|@setname[,...] filesystem|volume zfs unallow [-rldug] "everyone"|user|group[,...] [perm|@setname[,... ]] filesystem|volume zfs unallow [-rld] -e [perm|@setname[,... ]] filesystem|volume zfs unallow [-r] -c [perm|@setname[ ... ]] filesystem|volume zfs unallow [-r] -s @setname [perm|@setname[,... ]] filesystem|volume zfs hold [-r] tag snapshot... zfs holds [-r] snapshot... zfs release [-r] tag snapshot... zfs jail jailid filesystem zfs unjail jailid filesystem DESCRIPTION The zfs command configures ZFS datasets within a ZFS storage pool, as de- scribed in zpool(1M). A dataset is identified by a unique path within the ZFS namespace. For example: pool/{filesystem,volume,snapshot} where the maximum length of a dataset name is MAXNAMELEN (256 bytes). A dataset can be one of the following: file system A ZFS dataset of type filesystem can be mounted within the standard system namespace and behaves like other file systems. While ZFS file systems are designed to be POSIX compliant, known issues exist that prevent compliance in some cases. Applications that depend on standards conformance might fail due to nonstandard behavior when checking file system free space. volume A logical volume exported as a raw or block device. This type of dataset should only be used under special circumstances. File systems are typically used in most environments. snapshot A read-only version of a file system or volume at a given point in time. It is specified as filesystem@name or volume@name. ZFS File System Hierarchy A ZFS storage pool is a logical collection of devices that provide space for datasets. A storage pool is also the root of the ZFS file system hier- archy. The root of the pool can be accessed as a file system, such as mounting and unmounting, taking snapshots, and setting properties. The physical storage characteristics, however, are managed by the zpool(1M) command. See zpool(1M) for more information on creating and administering pools. Snapshots A snapshot is a read-only copy of a file system or volume. Snapshots can be created extremely quickly, and initially consume no additional space within the pool. As data within the active dataset changes, the snapshot consumes more data than would otherwise be shared with the active dataset. Snapshots can have arbitrary names. Snapshots of volumes can be cloned or rolled back, but cannot be accessed independently. File system snapshots can be accessed under the .zfs/snapshot directory in the root of the file system. Snapshots are automatically mounted on demand and may be unmounted at regular intervals. The visibility of the .zfs di- rectory can be controlled by the snapdir property. Clones A clone is a writable volume or file system whose initial contents are the same as another dataset. As with snapshots, creating a clone is nearly in- stantaneous, and initially consumes no additional space. Clones can only be created from a snapshot. When a snapshot is cloned, it creates an implicit dependency between the parent and child. Even though the clone is created somewhere else in the dataset hierarchy, the original snapshot cannot be destroyed as long as a clone exists. The origin property exposes this dependency, and the destroy command lists any such dependen- cies, if they exist. The clone parent-child dependency relationship can be reversed by using the promote subcommand. This causes the "origin" file system to become a clone of the specified file system, which makes it possible to destroy the file system that the clone was created from. Mount Points Creating a ZFS file system is a simple operation, so the number of file systems per system is likely to be numerous. To cope with this, ZFS auto- matically manages mounting and unmounting file systems without the need to edit the /etc/vfstab file. All automatically managed file systems are mounted by ZFS at boot time. By default, file systems are mounted under /path, where path is the name of the file system in the ZFS namespace. Directories are created and destroyed as needed. A file system can also have a mount point set in the mountpoint property. This directory is created as needed, and ZFS automatically mounts the file system when the zfs mount -a command is invoked (without editing /etc/vf- stab). The mountpoint property can be inherited, so if pool/home has a mount point of /export/stuff, then pool/home/user automatically inherits a mount point of /export/stuff/user. A file system mountpoint property of none prevents the file system from be- ing mounted. If needed, ZFS file systems can also be managed with traditional tools (mount, umount, /etc/vfstab). If a file system's mount point is set to legacy, ZFS makes no attempt to manage the file system, and the administra- tor is responsible for mounting and unmounting the file system. Zones A ZFS file system can be added to a non-global zone by using the zonecfg add fs subcommand. A ZFS file system that is added to a non-global zone must have its mountpoint property set to legacy. The physical properties of an added file system are controlled by the global administrator. However, the zone administrator can create, modify, or destroy files within the added file system, depending on how the file system is mounted. A dataset can also be delegated to a non-global zone by using the zonecfg add dataset subcommand. You cannot delegate a dataset to one zone and the children of the same dataset to another zone. The zone administrator can change properties of the dataset or any of its children. However, the quota property is controlled by the global administrator. A ZFS volume can be added as a device to a non-global zone by using the zonecfg add device subcommand. However, its physical properties can be mod- ified only by the global administrator. For more information about zonecfg syntax, see zonecfg(1M). After a dataset is delegated to a non-global zone, the zoned property is automatically set. A zoned file system cannot be mounted in the global zone, since the zone administrator might have to set the mount point to an unacceptable value. The global administrator can forcibly clear the zoned property, though this should be done with extreme care. The global administrator should verify that all the mount points are acceptable before clearing the property. Native Properties Properties are divided into two types, native properties and user-defined (or "user") properties. Native properties either export internal statistics or control ZFS behavior. In addition, native properties are either editable or read-only. User properties have no effect on ZFS behavior, but you can use them to annotate datasets in a way that is meaningful in your environ- ment. For more information about user properties, see the "User Properties" section, below. Every dataset has a set of properties that export statistics about the dataset as well as control various behaviors. Properties are inherited from the parent unless overridden by the child. Some properties apply only to certain types of datasets (file systems, volumes, or snapshots). The values of numeric properties can be specified using human-readable suf- fixes (for example, k, KB, M, Gb, and so forth, up to Z for zettabyte). The following are all valid (and equal) specifications: 1536M, 1.5g, 1.50GB The values of non-numeric properties are case sensitive and must be lower- case, except for mountpoint, sharenfs, and sharesmb. The following native properties consist of read-only statistics about the dataset. These properties can be neither set, nor inherited. Native proper- ties apply to all dataset types unless otherwise noted. available The amount of space available to the dataset and all its children, as- suming that there is no other activity in the pool. Because space is shared within a pool, availability can be limited by any number of fac- tors, including physical pool size, quotas, reservations, or other datasets within the pool. This property can also be referred to by its shortened column name, avail. compressratio For non-snapshots, the compression ratio achieved for the used space of this dataset, expressed as a multiplier. The used property includes descendant datasets, and, for clones, does not include the space shared with the origin snapshot. For snapshots, the compressratio is the same as the refcompressratio property. Compression can be turned on by run- ning: zfs set compression=on dataset. The default value is off. creation The time this dataset was created. defer_destroy This property is on if the snapshot has been marked for deferred de- stroy by using the zfs destroy -d command. Otherwise, the property is off. mounted For file systems, indicates whether the file system is currently mounted. This property can be either yes or no. origin For cloned file systems or volumes, the snapshot from which the clone was created. The origin cannot be destroyed (even with the -r or -f op- tions) so long as a clone exists. referenced The amount of data that is accessible by this dataset, which may or may not be shared with other datasets in the pool. When a snapshot or clone is created, it initially references the same amount of space as the file system or snapshot it was created from, since its contents are identical. This property can also be referred to by its shortened column name, re- fer. refcompressratio The compression ratio achieved for the referenced space of this dataset, expressed as a multiplier. See also the compressratio prop- erty. type The type of dataset: filesystem, volume, or snapshot. used The amount of space consumed by this dataset and all its descendents. This is the value that is checked against this dataset's quota and reservation. The space used does not include this dataset's reserva- tion, but does take into account the reservations of any descendent datasets. The amount of space that a dataset consumes from its parent, as well as the amount of space that are freed if this dataset is recur- sively destroyed, is the greater of its space used and its reservation. When snapshots (see the "Snapshots" section) are created, their space is initially shared between the snapshot and the file system, and pos- sibly with previous snapshots. As the file system changes, space that was previously shared becomes unique to the snapshot, and counted in the snapshot's space used. Additionally, deleting snapshots can in- crease the amount of space unique to (and used by) other snapshots. The amount of space used, available, or referenced does not take into account pending changes. Pending changes are generally accounted for within a few seconds. Committing a change to a disk using fsync(3c) or O_SYNC does not necessarily guarantee that the space usage information is updated immediately. usedby* The usedby* properties decompose the used properties into the various reasons that space is used. Specifically, used = usedbychildren + used- bydataset + usedbyrefreservation +, usedbysnapshots. These properties are only available for datasets created on zpool "version 13" pools. usedbychildren The amount of space used by children of this dataset, which would be freed if all the dataset's children were destroyed. usedbydataset The amount of space used by this dataset itself, which would be freed if the dataset were destroyed (after first removing any refreservation and destroying any necessary snapshots or descendents). usedbyrefreservation The amount of space used by a refreservation set on this dataset, which would be freed if the refreservation was removed. usedbysnapshots The amount of space consumed by snapshots of this dataset. In particu- lar, it is the amount of space that would be freed if all of this dataset's snapshots were destroyed. Note that this is not simply the sum of the snapshots' used properties because space can be shared by multiple snapshots. userused@user The amount of space consumed by the specified user in this dataset. Space is charged to the owner of each file, as displayed by ls -l. The amount of space charged is displayed by du and ls -s. See the zfs user- space subcommand for more information. Unprivileged users can access only their own space usage. The root user, or a user who has been granted the userused privilege with zfs allow, can access everyone's usage. The userused@... properties are not displayed by zfs get all. The user's name must be appended after the @ symbol, using one of the fol- lowing forms: o POSIX name (for example, joe) o POSIX numeric ID (for example, 789) o SID name (for example, joe.smith@mydomain) o SID numeric ID (for example, S-1-123-456-789) userrefs This property is set to the number of user holds on this snapshot. User holds are set by using the zfs hold command. groupused@group The amount of space consumed by the specified group in this dataset. Space is charged to the group of each file, as displayed by ls -l. See the userused@user property for more information. Unprivileged users can only access their own groups' space usage. The root user, or a user who has been granted the groupused privilege with zfs allow, can access all groups' usage. volblocksize=blocksize For volumes, specifies the block size of the volume. The blocksize can- not be changed once the volume has been written, so it should be set at volume creation time. The default blocksize for volumes is 8 Kbytes. Any power of 2 from 512 bytes to 128 Kbytes is valid. This property can also be referred to by its shortened column name, volblock. The following native properties can be used to change the behavior of a ZFS dataset. aclinherit=discard | noallow | restricted | passthrough | passthrough-x Controls how ACL entries are inherited when files and directories are created. A file system with an aclinherit property of discard does not inherit any ACL entries. A file system with an aclinherit property value of noallow only inherits inheritable ACL entries that specify "deny" permissions. The property value restricted (the default) removes the write_acl and write_owner permissions when the ACL entry is inher- ited. A file system with an aclinherit property value of passthrough inherits all inheritable ACL entries without any modifications made to the ACL entries when they are inherited. A file system with an aclin- herit property value of passthrough-x has the same meaning as passthrough, except that the owner@, group@, and everyone@ ACEs inherit the execute permission only if the file creation mode also requests the execute bit. When the property value is set to passthrough, files are created with a mode determined by the inheritable ACEs. If no inheritable ACEs exist that affect the mode, then the mode is set in accordance to the re- quested mode from the application. aclmode=discard | groupmask | passthrough Controls how an ACL is modified during chmod(2). A file system with an aclmode property of discard (the default) deletes all ACL entries that do not represent the mode of the file. An aclmode property of groupmask reduces permissions granted in all ALLOW entries found in the ACL such that they are no greater than the group permissions specified by chmod. A file system with an aclmode property of passthrough indicates that no changes are made to the ACL other than creating or updating the neces- sary ACL entries to represent the new mode of the file or directory. atime=on | off Controls whether the access time for files is updated when they are read. Turning this property off avoids producing write traffic when reading files and can result in significant performance gains, though it might confuse mailers and other similar utilities. The default value is on. canmount=on | off | noauto If this property is set to off, the file system cannot be mounted, and is ignored by zfs mount -a. Setting this property to off is similar to setting the mountpoint property to none, except that the dataset still has a normal mountpoint property, which can be inherited. Setting this property to off allows datasets to be used solely as a mechanism to in- herit properties. One example of setting canmount=off is to have two datasets with the same mountpoint, so that the children of both datasets appear in the same directory, but might have different inher- ited characteristics. When the noauto option is set, a dataset can only be mounted and un- mounted explicitly. The dataset is not mounted automatically when the dataset is created or imported, nor is it mounted by the zfs mount -a command or unmounted by the zfs unmount -a command. This property is not inherited. checksum=on | off | fletcher2,| fletcher4 | sha256 Controls the checksum used to verify data integrity. The default value is on, which automatically selects an appropriate algorithm (currently, fletcher4, but this may change in future releases). The value off dis- ables integrity checking on user data. Disabling checksums is NOT a recommended practice. Changing this property affects only newly-written data. compression=on | off | lzjb | gzip | gzip-N Controls the compression algorithm used for this dataset. The lzjb com- pression algorithm is optimized for performance while providing decent data compression. Setting compression to on uses the lzjb compression algorithm. The gzip compression algorithm uses the same compression as the gzip(1) command. You can specify the gzip level by using the value gzip-N where N is an integer from 1 (fastest) to 9 (best compression ratio). Currently, gzip is equivalent to gzip-6 (which is also the de- fault for gzip(1)). This property can also be referred to by its shortened column name com- press. Changing this property affects only newly-written data. copies=1 | 2 | 3 Controls the number of copies of data stored for this dataset. These copies are in addition to any redundancy provided by the pool, for ex- ample, mirroring or RAID-Z. The copies are stored on different disks, if possible. The space used by multiple copies is charged to the asso- ciated file and dataset, changing the used property and counting against quotas and reservations. Changing this property only affects newly-written data. Therefore, set this property at file system creation time by using the -o copies=N op- tion. devices=on | off Controls whether device nodes can be opened on this file system. The default value is on. exec=on | off Controls whether processes can be executed from within this file sys- tem. The default value is on. mountpoint=path | none | legacy Controls the mount point used for this file system. See the "Mount Points" section for more information on how this property is used. When the mountpoint property is changed for a file system, the file system and any children that inherit the mount point are unmounted. If the new value is legacy, then they remain unmounted. Otherwise, they are automatically remounted in the new location if the property was previously legacy or none, or if they were mounted before the property was changed. In addition, any shared file systems are unshared and shared in the new location. nbmand=on | off Controls whether the file system should be mounted with nbmand (Non Blocking mandatory locks). This is used for CIFS clients. Changes to this property only take effect when the file system is umounted and re- mounted. See mount(1M) for more information on nbmand mounts. primarycache=all | none | metadata Controls what is cached in the primary cache (ARC). If this property is set to all, then both user data and metadata is cached. If this prop- erty is set to none, then neither user data nor metadata is cached. If this property is set to metadata, then only metadata is cached. The de- fault value is all. quota=size | none Limits the amount of space a dataset and its descendents can consume. This property enforces a hard limit on the amount of space used. This includes all space consumed by descendents, including file systems and snapshots. Setting a quota on a descendent of a dataset that already has a quota does not override the ancestor's quota, but rather imposes an additional limit. Quotas cannot be set on volumes, as the volsize property acts as an im- plicit quota. userquota@user=size | none Limits the amount of space consumed by the specified user. User space consumption is identified by the userspace@user property. Enforcement of user quotas may be delayed by several seconds. This de- lay means that a user might exceed their quota before the system no- tices that they are over quota and begins to refuse additional writes with the EDQUOT error message . See the zfs userspace subcommand for more information. Unprivileged users can only access their own groups' space usage. The root user, or a user who has been granted the userquota privilege with zfs allow, can get and set everyone's quota. This property is not available on volumes, on file systems before ver- sion 4, or on pools before version 15. The userquota@... properties are not displayed by zfs get all. The user's name must be appended after the @ symbol, using one of the following forms: o POSIX name (for example, joe) o POSIX numeric ID (for example, 789) o SID name (for example, joe.smith@mydomain) o SID numeric ID (for example, S-1-123-456-789) groupquota@group=size | none Limits the amount of space consumed by the specified group. Group space consumption is identified by the userquota@user property. Unprivileged users can access only their own groups' space usage. The root user, or a user who has been granted the groupquota privilege with zfs allow, can get and set all groups' quotas. readonly=on | off Controls whether this dataset can be modified. The default value is off. This property can also be referred to by its shortened column name, rdonly. recordsize=size Specifies a suggested block size for files in the file system. This property is designed solely for use with database workloads that access files in fixed-size records. ZFS automatically tunes block sizes ac- cording to internal algorithms optimized for typical access patterns. For databases that create very large files but access them in small random chunks, these algorithms may be suboptimal. Specifying a record- size greater than or equal to the record size of the database can re- sult in significant performance gains. Use of this property for general purpose file systems is strongly discouraged, and may adversely affect performance. The size specified must be a power of two greater than or equal to 512 and less than or equal to 128 Kbytes. Changing the file system's recordsize affects only files created after- ward; existing files are unaffected. This property can also be referred to by its shortened column name, recsize. refquota=size | none Limits the amount of space a dataset can consume. This property en- forces a hard limit on the amount of space used. This hard limit does not include space used by descendents, including file systems and snap- shots. refreservation=size | none The minimum amount of space guaranteed to a dataset, not including its descendents. When the amount of space used is below this value, the dataset is treated as if it were taking up the amount of space speci- fied by refreservation. The refreservation reservation is accounted for in the parent datasets' space used, and counts against the parent datasets' quotas and reservations. If refreservation is set, a snapshot is only allowed if there is enough free pool space outside of this reservation to accommodate the current number of "referenced" bytes in the dataset. This property can also be referred to by its shortened column name, re- freserv. reservation=size | none The minimum amount of space guaranteed to a dataset and its descen- dents. When the amount of space used is below this value, the dataset is treated as if it were taking up the amount of space specified by its reservation. Reservations are accounted for in the parent datasets' space used, and count against the parent datasets' quotas and reserva- tions. This property can also be referred to by its shortened column name, re- serv. secondarycache=all | none | metadata Controls what is cached in the secondary cache (L2ARC). If this prop- erty is set to all, then both user data and metadata is cached. If this property is set to none, then neither user data nor metadata is cached. If this property is set to metadata, then only metadata is cached. The default value is all. setuid=on | off Controls whether the set-UID bit is respected for the file system. The default value is on. shareiscsi=on | off Like the sharenfs property, shareiscsi indicates whether a ZFS volume is exported as an iSCSI target. The acceptable values for this property are on, off, and type=disk. The default value is off. In the future, other target types might be supported. For example, tape. You might want to set shareiscsi=on for a file system so that all ZFS volumes within the file system are shared by default. However, setting this property on a file system has no direct effect. sharesmb=on | off | opts Controls whether the file system is shared by using the Solaris CIFS service, and what options are to be used. A file system with the sharesmb property set to off is managed through traditional tools such as sharemgr(1M). Otherwise, the file system is automatically shared and unshared with the zfs share and zfs unshare commands. If the property is set to on, the sharemgr(1M) command is invoked with no options. Oth- erwise, the sharemgr(1M) command is invoked with options equivalent to the contents of this property. Because SMB shares requires a resource name, a unique resource name is constructed from the dataset name. The constructed name is a copy of the dataset name except that the characters in the dataset name, which would be illegal in the resource name, are replaced with underscore (_) characters. A pseudo property "name" is also supported that allows you to replace the data set name with a specified name. The specified name is then used to replace the prefix dataset in the case of inheritance. For example, if the dataset data/home/john is set to name=john, then data/home/john has a resource name of john. If a child dataset of data/home/john/backups, it has a resource name of john_backups. When SMB shares are created, the SMB share name appears as an entry in the .zfs/shares directory. You can use the ls or chmod command to dis- play the share-level ACLs on the entries in this directory. When the sharesmb property is changed for a dataset, the dataset and any children inheriting the property are re-shared with the new op- tions, only if the property was previously set to off, or if they were shared before the property was changed. If the new property is set to off, the file systems are unshared. sharenfs=on | off | opts Controls whether the file system is shared via NFS, and what options are used. A file system with a sharenfs property of off is managed through traditional tools such as share(1M), unshare(1M), and df- stab(4). Otherwise, the file system is automatically shared and un- shared with the zfs share and zfs unshare commands. If the property is set to on, the share(1M) command is invoked with no options. Otherwise, the share(1M) command is invoked with options equivalent to the con- tents of this property. When the sharenfs property is changed for a dataset, the dataset and any children inheriting the property are re-shared with the new op- tions, only if the property was previously off, or if they were shared before the property was changed. If the new property is off, the file systems are unshared. logbias = latency | throughput Provide a hint to ZFS about handling of synchronous requests in this dataset. If logbias is set to latency (the default), ZFS will use pool log devices (if configured) to handle the requests at low latency. If logbias is set to throughput, ZFS will not use configured pool log de- vices. ZFS will instead optimize synchronous operations for global pool throughput and efficient use of resources. snapdir=hidden | visible Controls whether the .zfs directory is hidden or visible in the root of the file system as discussed in the "Snapshots" section. The default value is hidden. version=1 | 2 | current The on-disk version of this file system, which is independent of the pool version. This property can only be set to later supported ver- sions. See the zfs upgrade command. volsize=size For volumes, specifies the logical size of the volume. By default, cre- ating a volume establishes a reservation of equal size. For storage pools with a version number of 9 or higher, a refreservation is set in- stead. Any changes to volsize are reflected in an equivalent change to the reservation (or refreservation). The volsize can only be set to a multiple of volblocksize, and cannot be zero. The reservation is kept equal to the volume's logical size to prevent unexpected behavior for consumers. Without the reservation, the volume could run out of space, resulting in undefined behavior or data corrup- tion, depending on how the volume is used. These effects can also occur when the volume size is changed while it is in use (particularly when shrinking the size). Extreme care should be used when adjusting the volume size. Though not recommended, a "sparse volume" (also known as "thin provi- sioning") can be created by specifying the -s option to the zfs create -V command, or by changing the reservation after the volume has been created. A "sparse volume" is a volume where the reservation is less then the volume size. Consequently, writes to a sparse volume can fail with ENOSPC when the pool is low on space. For a sparse volume, changes to volsize are not reflected in the reservation. vscan=on | off Controls whether regular files should be scanned for viruses when a file is opened and closed. In addition to enabling this property, the virus scan service must also be enabled for virus scanning to occur. The default value is off. xattr=on | off Controls whether extended attributes are enabled for this file system. The default value is on. zoned=on | off Controls whether the dataset is managed from a non-global zone. See the "Zones" section for more information. The default value is off. The following three properties cannot be changed after the file system is created, and therefore, should be set when the file system is created. If the properties are not set with the zfs create or zpool create commands, these properties are inherited from the parent dataset. If the parent dataset lacks these properties due to having been created prior to these features being supported, the new file system will have the default values for these properties. casesensitivity=sensitive | insensitive | mixed Indicates whether the file name matching algorithm used by the file system should be case-sensitive, case-insensitive, or allow a combina- tion of both styles of matching. The default value for the casesensi- tivity property is sensitive. Traditionally, UNIX and POSIX file sys- tems have case-sensitive file names. The mixed value for the casesensitivity property indicates that the file system can support requests for both case-sensitive and case-in- sensitive matching behavior. Currently, case-insensitive matching be- havior on a file system that supports mixed behavior is limited to the Solaris CIFS server product. For more information about the mixed value behavior, see the Solaris ZFS Administration Guide. normalization = none | formC | formD | formKC | formKD Indicates whether the file system should perform a unicode normaliza- tion of file names whenever two file names are compared, and which nor- malization algorithm should be used. File names are always stored un- modified, names are normalized as part of any comparison process. If this property is set to a legal value other than none, and the utf8only property was left unspecified, the utf8only property is automatically set to on. The default value of the normalization property is none. This property cannot be changed after the file system is created. jailed =on | off Controls whether the dataset is managed from within a jail. The default value is "off". utf8only=on | off Indicates whether the file system should reject file names that include characters that are not present in the UTF-8 character code set. If this property is explicitly set to off, the normalization property must either not be explicitly set or be set to none. The default value for the utf8only property is off. This property cannot be changed after the file system is created. The casesensitivity, normalization, and utf8only properties are also new permissions that can be assigned to non-privileged users by using the ZFS delegated administration feature. Temporary Mount Point Properties When a file system is mounted, either through mount(1M) for legacy mounts or the zfs mount command for normal file systems, its mount options are set according to its properties. The correlation between properties and mount options is as follows: PROPERTY MOUNT OPTION devices devices/nodevices exec exec/noexec readonly ro/rw setuid setuid/nosetuid xattr xattr/noxattr In addition, these options can be set on a per-mount basis using the -o op- tion, without affecting the property that is stored on disk. The values specified on the command line override the values stored in the dataset. The -nosuid option is an alias for nodevices,nosetuid. These properties are reported as "temporary" by the zfs get command. If the properties are changed while the dataset is mounted, the new setting overrides any tempo- rary settings. User Properties In addition to the standard native properties, ZFS supports arbitrary user properties. User properties have no effect on ZFS behavior, but applica- tions or administrators can use them to annotate datasets (file systems, volumes, and snapshots). User property names must contain a colon (:) character to distinguish them from native properties. They may contain lowercase letters, numbers, and the following punctuation characters: colon (:), dash (-), period (.), and underscore (_). The expected convention is that the property name is di- vided into two portions such as module:property, but this namespace is not enforced by ZFS. User property names can be at most 256 characters, and cannot begin with a dash (-). When making programmatic use of user properties, it is strongly suggested to use a reversed DNS domain name for the module component of property names to reduce the chance that two independently-developed packages use the same property name for different purposes. Property names beginning with com.sun. are reserved for use by Sun Microsystems. The values of user properties are arbitrary strings, are always inherited, and are never validated. All of the commands that operate on properties (zfs list, zfs get, zfs set, and so forth) can be used to manipulate both native properties and user properties. Use the zfs inherit command to clear a user property . If the property is not defined in any parent dataset, it is removed entirely. Property values are limited to 1024 characters. ZFS Volumes as Swap or Dump Devices During an initial installation or a live upgrade from a UFS file system, a swap device and dump device are created on ZFS volumes in the ZFS root pool. By default, the swap area size is based on 1/2 the size of physical memory up to 2 Gbytes. The size of the dump device depends on the kernel's requirements at installation time. Separate ZFS volumes must be used for the swap area and dump devices. Do not swap to a file on a ZFS file system. A ZFS swap file configuration is not supported. If you need to change your swap area or dump device after the system is in- stalled or upgraded, use the swap(1M) and dumpadm(1M) commands. If you need to change the size of your swap area or dump device, see the Solaris ZFS Administration Guide. SUBCOMMANDS All subcommands that modify state are logged persistently to the pool in their original form. zfs ? Displays a help message. zfs create [-p] [-o property=value] ... filesystem Creates a new ZFS file system. The file system is automatically mounted according to the mountpoint property inherited from the parent. -p Creates all the non-existing parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent. Any property specified on the command line using the -o option is ignored. If the target filesys- tem already exists, the operation completes successfully. -o property=value Sets the specified property as if the command zfs set prop- erty=value was invoked at the same time the dataset was created. Any editable ZFS property can also be set at creation time. Multi- ple -o options can be specified. An error results if the same prop- erty is specified in multiple -o options. zfs create [-ps] [-b blocksize] [-o property=value] ... -V size volume Creates a volume of the given size. The volume is exported as a block device in /dev/zvol/{dsk,rdsk}/path, where path is the name of the vol- ume in the ZFS namespace. The size represents the logical size as ex- ported by the device. By default, a reservation of equal size is cre- ated. size is automatically rounded up to the nearest 128 Kbytes to ensure that the volume has an integral number of blocks regardless of block- size. -p Creates all the non-existing parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent. Any property specified on the command line using the -o option is ignored. If the target filesys- tem already exists, the operation completes successfully. -s Creates a sparse volume with no reservation. See volsize in the Na- tive Properties section for more information about sparse volumes. -o property=value Sets the specified property as if the zfs set property=value com- mand was invoked at the same time the dataset was created. Any ed- itable ZFS property can also be set at creation time. Multiple -o options can be specified. An error results if the same property is specified in multiple -o options. -b blocksize Equivalent to -o volblocksize=blocksize. If this option is speci- fied in conjunction with -o volblocksize, the resulting behavior is undefined. zfs destroy [-rRf] filesystem|volume Destroys the given dataset. By default, the command unshares any file systems that are currently shared, unmounts any file systems that are currently mounted, and refuses to destroy a dataset that has active de- pendents (children or clones). -r Recursively destroy all children. -R Recursively destroy all dependents, including cloned file systems outside the target hierarchy. -f Force an unmount of any file systems using the unmount -f command. This option has no effect on non-file systems or unmounted file systems. Extreme care should be taken when applying either the -r or the -R op- tions, as they can destroy large portions of a pool and cause unex- pected behavior for mounted file systems in use. zfs destroy [-rRd] snapshot The given snapshot is destroyed immediately if and only if the zfs de- stroy command without the -d option would have destroyed it. Such imme- diate destruction would occur, for example, if the snapshot had no clones and the user-initiated reference count were zero. If the snapshot does not qualify for immediate destruction, it is marked for deferred deletion. In this state, it exists as a usable, visible snapshot until both of the preconditions listed above are met, at which point it is destroyed. -d Defer snapshot deletion. -r Destroy (or mark for deferred deletion) all snapshots with this name in descendent file systems. -R Recursively destroy all dependents. zfs snapshot [-r] [-o property=value] ... filesystem@snapname|volume@snap- name Creates a snapshot with the given name. All previous modifications by successful system calls to the file system are part of the snapshot. See the "Snapshots" section for details. -r Recursively create snapshots of all descendent datasets. Snapshots are taken atomically, so that all recursive snapshots correspond to the same moment in time. -o property=value Sets the specified property; see zfs create for details. zfs rollback [-rRf] snapshot Roll back the given dataset to a previous snapshot. When a dataset is rolled back, all data that has changed since the snapshot is discarded, and the dataset reverts to the state at the time of the snapshot. By default, the command refuses to roll back to a snapshot other than the most recent one. In order to do so, all intermediate snapshots must be destroyed by specifying the -r option. The -rR options do not recursively destroy the child snapshots of a re- cursive snapshot. Only the top-level recursive snapshot is destroyed by either of these options. To completely roll back a recursive snapshot, you must rollback the individual child snapshots. -r Recursively destroy any snapshots more recent than the one speci- fied. -R Recursively destroy any more recent snapshots, as well as any clones of those snapshots. -f Used with the -R option to force an unmount of any clone file sys- tems that are to be destroyed. zfs clone [-p] [-o property=value] ... snapshot filesystem|volume Creates a clone of the given snapshot. See the "Clones" section for de- tails. The target dataset can be located anywhere in the ZFS hierarchy, and is created as the same type as the original. -p Creates all the non-existing parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent. If the target filesystem or volume already exists, the operation completes successfully. -o property=value Sets the specified property; see zfs create for details. zfs promote clone-filesystem Promotes a clone file system to no longer be dependent on its "origin" snapshot. This makes it possible to destroy the file system that the clone was created from. The clone parent-child dependency relationship is reversed, so that the origin file system becomes a clone of the specified file system. The snapshot that was cloned, and any snapshots previous to this snap- shot, are now owned by the promoted clone. The space they use moves from the origin file system to the promoted clone, so enough space must be available to accommodate these snapshots. No new space is consumed by this operation, but the space accounting is adjusted. The promoted clone must not have any conflicting snapshot names of its own. The re- name subcommand can be used to rename any conflicting snapshots. zfs rename filesystem|volume|snapshot filesystem|volume|snapshot zfs rename [-p] filesystem|volume filesystem|volume Renames the given dataset. The new target can be located anywhere in the ZFS hierarchy, with the exception of snapshots. Snapshots can only be renamed within the parent file system or volume. When renaming a snapshot, the parent file system of the snapshot does not need to be specified as part of the second argument. Renamed file systems can in- herit new mount points, in which case they are unmounted and remounted at the new mount point. -p Creates all the nonexistent parent datasets. Datasets created in this manner are automatically mounted according to the mountpoint property inherited from their parent. zfs rename -r snapshot snapshot Recursively rename the snapshots of all descendent datasets. Snapshots are the only dataset that can be renamed recursively. zfs list [-r|-d depth] [-H] [-o property[,...]] [ -t type[,...]] [ -s prop- erty ] ... [ -S property ] ... [filesystem|volume|snapshot] ... Lists the property information for the given datasets in tabular form. If specified, you can list property information by the absolute path- name or the relative pathname. By default, all file systems and volumes are displayed. Snapshots are displayed if the listsnaps property is on (the default is off) . The following fields are displayed, name,used,available,referenced,mountpoint. -H Used for scripting mode. Do not print headers and separate fields by a single tab instead of arbitrary white space. -r Recursively display any children of the dataset on the command line. -d depth Recursively display any children of the dataset, limiting the re- cursion to depth. A depth of 1 will display only the dataset and its direct children. -o property A comma-separated list of properties to display. The property must be: o One of the properties described in the "Native Proper- ties" section o A user property o The value name to display the dataset name o The value space to display space usage properties on file systems and volumes. This is a shortcut for speci- fying -o name,avail,used,usedsnap,usedds,usedrefre- serv,usedchild -t filesystem,volume syntax. -s property A property for sorting the output by column in ascending order based on the value of the property. The property must be one of the properties described in the "Properties" section, or the special value name to sort by the dataset name. Multiple properties can be specified at one time using multiple -s property options. Multiple -s options are evaluated from left to right in decreasing order of importance. The following is a list of sorting criteria: o Numeric types sort in numeric order. o String types sort in alphabetical order. o Types inappropriate for a row sort that row to the lit- eral bottom, regardless of the specified ordering. o If no sorting options are specified the existing behav- ior of zfs list is preserved. -S property Same as the -s option, but sorts by property in descending order. -t type A comma-separated list of types to display, where type is one of filesystem, snapshot , volume, or all. For example, specifying -t snapshot displays only snapshots. zfs set property=value filesystem|volume|snapshot ... Sets the property to the given value for each dataset. Only some prop- erties can be edited. See the "Properties" section for more information on what properties can be set and acceptable values. Numeric values can be specified as exact values, or in a human-readable form with a suffix of B, K, M, G, T, P, E, Z (for bytes, kilobytes, megabytes, gigabytes, terabytes, petabytes, exabytes, or zettabytes, respectively). User properties can be set on snapshots. For more information, see the "User Properties" section. zfs get [-r|-d depth] [-Hp] [-o field[,...] [-s source[,...] "all" | prop- erty[,...] filesystem|volume|snapshot ... Displays properties for the given datasets. If no datasets are speci- fied, then the command displays properties for all datasets on the sys- tem. For each property, the following columns are displayed: name Dataset name property Property name value Property value source Property source. Can either be local, default, temporary, inherited, or none (-). All columns are displayed by default, though this can be controlled by using the -o option. This command takes a comma-separated list of prop- erties as described in the "Native Properties" and "User Properties" sections. The special value all can be used to display all properties that apply to the given dataset's type (filesystem, volume, or snapshot). -r Recursively display properties for any children. -d depth Recursively display any children of the dataset, limiting the re- cursion to depth. A depth of 1 will display only the dataset and its direct children. -H Display output in a form more easily parsed by scripts. Any headers are omitted, and fields are explicitly separated by a single tab instead of an arbitrary amount of space. -o field A comma-separated list of columns to display. name,prop- erty,value,source is the default value. -s source A comma-separated list of sources to display. Those properties com- ing from a source other than those in this list are ignored. Each source must be one of the following: local,default,inherited,tempo- rary,none. The default value is all sources. -p Display numbers in parseable (exact) values. zfs inherit [-r] property filesystem|volume|snapshot ... Clears the specified property, causing it to be inherited from an an- cestor. If no ancestor has the property set, then the default value is used. See the "Properties" section for a listing of default values, and details on which properties can be inherited. -r Recursively inherit the given property for all children. zfs upgrade [-v] Displays a list of file systems that are not the most recent version. zfs upgrade [-r] [-V version] [-a | filesystem] Upgrades file systems to a new on-disk version. Once this is done, the file systems will no longer be accessible on systems running older ver- sions of the software. zfs send streams generated from new snapshots of these file systems cannot be accessed on systems running older versions of the software. In general, the file system version is independent of the pool version. See zpool(1M) for information on the zpool upgrade command. In some cases, the file system version and the pool version are inter- related and the pool version must be upgraded before the file system version can be upgraded. -a Upgrade all file systems on all imported pools. filesystem Upgrade the specified file system. -r Upgrade the specified file system and all descendent file systems -V version Upgrade to the specified version. If the -V flag is not specified, this command upgrades to the most recent version. This option can only be used to increase the version number, and only up to the most recent version supported by this software. zfs userspace [-niHp] [-o field[,...]] [-sS field]... [-t type [,...]] filesystem | snapshot Displays space consumed by, and quotas on, each user in the specified filesystem or snapshot. This corresponds to the userused@user and userquota@user properties. -n Print numeric ID instead of user/group name. -H Do not print headers, use tab-delimited output. -p Use exact (parseable) numeric output. -o field[,...] Display only the specified fields from the following set, type,name,used,quota.The default is to display all fields. -s field Sort output by this field. The s and S flags may be specified mul- tiple times to sort first by one field, then by another. The de- fault is -s type -s name. -S field Sort by this field in reverse order. See -s. -t type[,...] Print only the specified types from the following set, all,posixuser,smbuser,posixgroup,smbgroup. The default is -t posixuser,smbuser The default can be changed to include group types. -i Translate SID to POSIX ID. The POSIX ID may be ephemeral if no map- ping exists. Normal POSIX interfaces (for example, stat(2), ls -l) perform this translation, so the -i option allows the output from zfs userspace to be compared directly with those utilities. How- ever, -i may lead to confusion if some files were created by an SMB user before a SMB-to-POSIX name mapping was established. In such a case, some files are owned by the SMB entity and some by the POSIX entity. However, the -i option will report that the POSIX entity has the total usage and quota for both. zfs groupspace [-niHp] [-o field[,...]] [-sS field]... [-t type [,...]] filesystem | snapshot Displays space consumed by, and quotas on, each group in the specified filesystem or snapshot. This subcommand is identical to zfs userspace, except that the default types to display are -t posixgroup,smbgroup. - zfs mount Displays all ZFS file systems currently mounted. zfs mount [-vO] [-o options] -a | filesystem Mounts ZFS file systems. Invoked automatically as part of the boot process. -o options An optional, comma-separated list of mount options to use temporar- ily for the duration of the mount. See the "Temporary Mount Point Properties" section for details. -O Perform an overlay mount. See mount(1M) for more information. -v Report mount progress. -a Mount all available ZFS file systems. Invoked automatically as part of the boot process. filesystem Mount the specified filesystem. zfs unmount [-f] -a | filesystem|mountpoint Unmounts currently mounted ZFS file systems. Invoked automatically as part of the shutdown process. -f Forcefully unmount the file system, even if it is currently in use. -a Unmount all available ZFS file systems. Invoked automatically as part of the boot process. filesystem|mountpoint Unmount the specified filesystem. The command can also be given a path to a ZFS file system mount point on the system. zfs share -a | filesystem Shares available ZFS file systems. -a Share all available ZFS file systems. Invoked automatically as part of the boot process. filesystem Share the specified filesystem according to the sharenfs and sharesmb properties. File systems are shared when the sharenfs or sharesmb property is set. zfs unshare -a | filesystem|mountpoint Unshares currently shared ZFS file systems. This is invoked automati- cally as part of the shutdown process. -a Unshare all available ZFS file systems. Invoked automatically as part of the boot process. filesystem|mountpoint Unshare the specified filesystem. The command can also be given a path to a ZFS file system shared on the system. zfs send [-vR] [-[iI] snapshot] snapshot Creates a stream representation of the second snapshot, which is writ- ten to standard output. The output can be redirected to a file or to a different system (for example, using ssh(1). By default, a full stream is generated. -i snapshot Generate an incremental stream from the first snapshot to the sec- ond snapshot. The incremental source (the first snapshot) can be specified as the last component of the snapshot name (for example, the part after the @), and it is assumed to be from the same file system as the second snapshot. If the destination is a clone, the source may be the origin snap- shot, which must be fully specified (for example, pool/fs@origin, not just @origin). -I snapshot Generate a stream package that sends all intermediary snapshots from the first snapshot to the second snapshot. For example, -I @a fs@d is similar to -i @a fs@b; -i @b fs@c; -i @c fs@d. The incre- mental source snapshot may be specified as with the -i option. -R Generate a replication stream package, which will replicate the specified filesystem, and all descendent file systems, up to the named snapshot. When received, all properties, snapshots, descen- dent file systems, and clones are preserved. If the -i or -I flags are used in conjunction with the -R flag, an incremental replication stream is generated. The current values of properties, and current snapshot and file system names are set when the stream is received. If the -F flag is specified when this stream is received, snapshots and file systems that do not exist on the sending side are destroyed. -v Print verbose information about the stream package generated. The format of the stream is committed. You will be able to receive your streams on future versions of ZFS. zfs receive [-vnFu] filesystem|volume|snapshot zfs receive [-vnFu] -d filesystem Creates a snapshot whose contents are as specified in the stream pro- vided on standard input. If a full stream is received, then a new file system is created as well. Streams are created using the zfs send sub- command, which by default creates a full stream. zfs recv can be used as an alias for zfs receive. If an incremental stream is received, then the destination file system must already exist, and its most recent snapshot must match the incre- mental stream's source. For zvols, the destination device link is de- stroyed and recreated, which means the zvol cannot be accessed during the receive operation. When a snapshot replication package stream that is generated by using the zfs send -R command is received, any snapshots that do not exist on the sending location are destroyed by using the zfs destroy -d com- mand. The name of the snapshot (and file system, if a full stream is re- ceived) that this subcommand creates depends on the argument type and the -d option. If the argument is a snapshot name, the specified snapshot is created. If the argument is a file system or volume name, a snapshot with the same name as the sent snapshot is created within the specified filesys- tem or volume. If the -d option is specified, the snapshot name is de- termined by appending the sent snapshot's name to the specified filesystem. If the -d option is specified, any required file systems within the specified one are created. -d Use the name of the sent snapshot to determine the name of the new snapshot as described in the paragraph above. -u File system that is associated with the received stream is not mounted. -v Print verbose information about the stream and the time required to perform the receive operation. -n Do not actually receive the stream. This can be useful in conjunc- tion with the -v option to verify the name the receive operation would use. -F Force a rollback of the file system to the most recent snapshot be- fore performing the receive operation. If receiving an incremental replication stream (for example, one generated by zfs send -R -[iI]), destroy snapshots and file systems that do not exist on the sending side. zfs allow filesystem | volume Displays permissions that have been delegated on the specified filesys- tem or volume. See the other forms of zfs allow for more information. zfs allow [-ldug] "everyone"|user|group[,...] perm|@setname[,...] filesys- tem| volume zfs allow [-ld] -e perm|@setname[,...] filesystem | volume Delegates ZFS administration permission for the file systems to non- privileged users. [-ug] "everyone"|user|group[,...] Specifies to whom the permissions are delegated. Multiple entities can be specified as a comma-separated list. If neither of the -ug options are specified, then the argument is interpreted preferen- tially as the keyword "everyone", then as a user name, and lastly as a group name. To specify a user or group named "everyone", use the -u or -g options. To specify a group with the same name as a user, use the -g options. [-e] perm|@setname[,...] Specifies that the permissions be delegated to "everyone." Multiple permissions may be specified as a comma-separated list. Permission names are the same as ZFS subcommand and property names. See the property list below. Property set names, which begin with an at sign (@) , may be specified. See the -s form below for details. [-ld] filesystem|volume Specifies where the permissions are delegated. If neither of the -ld options are specified, or both are, then the permissions are allowed for the file system or volume, and all of its descendents. If only the -l option is used, then is allowed "locally" only for the specified file system. If only the -d option is used, then is allowed only for the descendent file systems. Permissions are generally the ability to use a ZFS subcommand or change a ZFS property. The following permissions are available: NAME TYPE NOTES allow subcommand Must also have the permission that is being allowed clone subcommand Must also have the 'create' ability and 'mount' ability in the origin file system create subcommand Must also have the 'mount' ability destroy subcommand Must also have the 'mount' ability mount subcommand Allows mount/umount of ZFS datasets promote subcommand Must also have the 'mount' and 'promote' ability in the origin file system receive subcommand Must also have the 'mount' and 'create' ability rename subcommand Must also have the 'mount' and 'create' ability in the new parent rollback subcommand Must also have the 'mount' ability send subcommand share subcommand Allows sharing file systems over NFS or SMB protocols snapshot subcommand Must also have the 'mount' ability groupquota other Allows accessing any groupquota@... property groupused other Allows reading any groupused@... property userprop other Allows changing any user property userquota other Allows accessing any userquota@... property userused other Allows reading any userused@... property aclinherit property aclmode property atime property canmount property casesensitivity property checksum property compression property copies property devices property exec property mountpoint property nbmand property normalization property primarycache property quota property readonly property recordsize property refquota property refreservation property reservation property secondarycache property setuid property shareiscsi property sharenfs property sharesmb property snapdir property utf8only property version property volblocksize property volsize property vscan property xattr property zoned property zfs allow -c perm|@setname[,...] filesystem|volume Sets "create time" permissions. These permissions are granted (locally) to the creator of any newly-created descendent file system. zfs allow -s @setname perm|@setname[,...] filesystem|volume Defines or adds permissions to a permission set. The set can be used by other zfs allow commands for the specified file system and its descen- dents. Sets are evaluated dynamically, so changes to a set are immedi- ately reflected. Permission sets follow the same naming restrictions as ZFS file systems, but the name must begin with an "at sign" (@), and can be no more than 64 characters long. zfs unallow [-rldug] "everyone"|user|group[,...] [perm|@setname[, ...]] filesystem|volume zfs unallow [-rld] -e [perm|@setname [,...]] filesystem|volume zfs unallow [-r] -c [perm|@setname[,...]] filesystem|volume Removes permissions that were granted with the zfs allow command. No permissions are explicitly denied, so other permissions granted are still in effect. For example, if the permission is granted by an ances- tor. If no permissions are specified, then all permissions for the specified user, group, or everyone are removed. Specifying "everyone" (or using the -e option) only removes the permissions that were granted to "everyone", not all permissions for every user and group. See the zfs allow command for a description of the -ldugec options. -r Recursively remove the permissions from this file system and all descendents. zfs unallow [-r] -s @setname [perm|@setname[,...]] filesystem|volume Removes permissions from a permission set. If no permissions are speci- fied, then all permissions are removed, thus removing the set entirely. zfs hold [-r] tag snapshot... Adds a single reference, named with the tag argument, to the specified snapshot or snapshots. Each snapshot has its own tag namespace, and tags must be unique within that space. If a hold exists on a snapshot, attempts to destroy that snapshot by using the zfs destroy command return EBUSY. -r Specifies that a hold with the given tag is applied recursively to the snapshots of all descendent file systems. zfs holds [-r] snapshot... Lists all existing user references for the given snapshot or snapshots. -r Lists the holds that are set on the named descendent snapshots, in addition to listing the holds on the named snapshot. zfs release [-r] tag snapshot... Removes a single reference, named with the tag argument, from the spec- ified snapshot or snapshots. The tag must already exist for each snap- shot. If a hold exists on a snapshot, attempts to destroy that snapshot by using the zfs destroy command return EBUSY. -r Recursively releases a hold with the given tag on the snapshots of all descendent file systems. zfs jail jailid filesystem Attaches the given file system to the given jail. From now on this file system tree can be managed from within a jail if the "jailed" property has been set. To use this functionality, sysctl security.jail.en- force_statfs should be set to 0 and sysctl security.jail.mount_allowed should be set to 1. zfs unjail jailid filesystem Detaches the given file system from the given jail. EXAMPLES Example 1 Creating a ZFS File System Hierarchy The following commands create a file system named pool/home and a file sys- tem named pool/home/bob. The mount point /export/home is set for the parent file system, and is automatically inherited by the child file system. # zfs create pool/home # zfs set mountpoint=/export/home pool/home # zfs create pool/home/bob Example 2 Creating a ZFS Snapshot The following command creates a snapshot named yesterday. This snapshot is mounted on demand in the .zfs/snapshot directory at the root of the pool/home/bob file system. # zfs snapshot pool/home/bob@yesterday Example 3 Creating and Destroying Multiple Snapshots The following command creates snapshots named yesterday of pool/home and all of its descendent file systems. Each snapshot is mounted on demand in the .zfs/snapshot directory at the root of its file system. The second com- mand destroys the newly created snapshots. # zfs snapshot -r pool/home@yesterday # zfs destroy -r pool/home@yesterday Example 4 Disabling and Enabling File System Compression The following command disables the compression property for all file sys- tems under pool/home. The next command explicitly enables compression for pool/home/anne. # zfs set compression=off pool/home # zfs set compression=on pool/home/anne Example 5 Listing ZFS Datasets The following command lists all active file systems and volumes in the sys- tem. Snapshots are displayed if the listsnaps property is on. The default is off. See zpool(1M) for more information on pool properties. # zfs list NAME USED AVAIL REFER MOUNTPOINT pool 450K 457G 18K /pool pool/home 315K 457G 21K /export/home pool/home/anne 18K 457G 18K /export/home/anne pool/home/bob 276K 457G 276K /export/home/bob Example 6 Setting a Quota on a ZFS File System The following command sets a quota of 50 Gbytes for pool/home/bob. # zfs set quota=50G pool/home/bob Example 7 Listing ZFS Properties The following command lists all properties for pool/home/bob. # zfs get all pool/home/bob NAME PROPERTY VALUE SOURCE pool/home/bob type filesystem - pool/home/bob creation Tue Jul 21 15:53 2009 - pool/home/bob used 21K - pool/home/bob available 20.0G - pool/home/bob referenced 21K - pool/home/bob compressratio 1.00x - pool/home/bob mounted yes - pool/home/bob quota 20G local pool/home/bob reservation none default pool/home/bob recordsize 128K default pool/home/bob mountpoint /pool/home/bob default pool/home/bob sharenfs off default pool/home/bob checksum on default pool/home/bob compression on local pool/home/bob atime on default pool/home/bob devices on default pool/home/bob exec on default pool/home/bob setuid on default pool/home/bob readonly off default pool/home/bob zoned off default pool/home/bob snapdir hidden default pool/home/bob aclmode discard default pool/home/bob aclinherit restricted default pool/home/bob canmount on default pool/home/bob shareiscsi off default pool/home/bob xattr on default pool/home/bob copies 1 default pool/home/bob version 4 - pool/home/bob utf8only off - pool/home/bob normalization none - pool/home/bob casesensitivity sensitive - pool/home/bob vscan off default pool/home/bob nbmand off default pool/home/bob sharesmb off default pool/home/bob refquota none default pool/home/bob refreservation none default pool/home/bob primarycache all default pool/home/bob secondarycache all default pool/home/bob usedbysnapshots 0 - pool/home/bob usedbydataset 21K - pool/home/bob usedbychildren 0 - pool/home/bob usedbyrefreservation 0 - The following command gets a single property value. # zfs get -H -o value compression pool/home/bob on The following command lists all properties with local settings for pool/home/bob. # zfs get -r -s local -o name,property,value all pool/home/bob NAME PROPERTY VALUE pool/home/bob quota 20G pool/home/bob compression on Example 8 Rolling Back a ZFS File System The following command reverts the contents of pool/home/anne to the snap- shot named yesterday, deleting all intermediate snapshots. # zfs rollback -r pool/home/anne@yesterday Example 9 Creating a ZFS Clone The following command creates a writable file system whose initial contents are the same as pool/home/bob@yesterday. # zfs clone pool/home/bob@yesterday pool/clone Example 10 Promoting a ZFS Clone The following commands illustrate how to test out changes to a file system, and then replace the original file system with the changed one, using clones, clone promotion, and renaming: # zfs create pool/project/production populate /pool/project/production with data # zfs snapshot pool/project/production@today # zfs clone pool/project/production@today pool/project/beta make changes to /pool/project/beta and test them # zfs promote pool/project/beta # zfs rename pool/project/production pool/project/legacy # zfs rename pool/project/beta pool/project/production once the legacy version is no longer needed, it can be destroyed # zfs destroy pool/project/legacy Example 11 Inheriting ZFS Properties The following command causes pool/home/bob and pool/home/anne to inherit the checksum property from their parent. # zfs inherit checksum pool/home/bob pool/home/anne Example 12 Remotely Replicating ZFS Data The following commands send a full stream and then an incremental stream to a remote machine, restoring them into poolB/received/fs@aand poolB/re- ceived/fs@b, respectively. poolB must contain the file system poolB/re- ceived, and must not initially contain poolB/received/fs. # zfs send pool/fs@a | \ ssh host zfs receive poolB/received/fs@a # zfs send -i a pool/fs@b | ssh host \ zfs receive poolB/received/fs Example 13 Using the zfs receive -d Option The following command sends a full stream of poolA/fsA/fsB@snap to a remote machine, receiving it into poolB/received/fsA/fsB@snap. The fsA/fsB@snap portion of the received snapshot's name is determined from the name of the sent snapshot. poolB must contain the file system poolB/received. If poolB/received/fsA does not exist, it is created as an empty file system. # zfs send poolA/fsA/fsB@snap | \ ssh host zfs receive -d poolB/received Example 14 Setting User Properties The following example sets the user-defined com.example:department property for a dataset. # zfs set com.example:department=12345 tank/accounting Example 15 Creating a ZFS Volume as an iSCSI Target Device The following example shows how to create a ZFS volume as an iSCSI target. # zfs create -V 2g pool/volumes/vol1 # zfs set shareiscsi=on pool/volumes/vol1 # iscsitadm list target Target: pool/volumes/vol1 iSCSI Name: iqn.1986-03.com.sun:02:7b4b02a6-3277-eb1b-e686-a24762c52a8c Connections: 0 After the iSCSI target is created, set up the iSCSI initiator. For more in- formation about the Solaris iSCSI initiator, see iscsitadm(1M). Example 16 Performing a Rolling Snapshot The following example shows how to maintain a history of snapshots with a consistent naming scheme. To keep a week's worth of snapshots, the user de- stroys the oldest snapshot, renames the remaining snapshots, and then cre- ates a new snapshot, as follows: # zfs destroy -r pool/users@7daysago # zfs rename -r pool/users@6daysago @7daysago # zfs rename -r pool/users@5daysago @6daysago # zfs rename -r pool/users@yesterday @5daysago # zfs rename -r pool/users@yesterday @4daysago # zfs rename -r pool/users@yesterday @3daysago # zfs rename -r pool/users@yesterday @2daysago # zfs rename -r pool/users@today @yesterday # zfs snapshot -r pool/users@today Example 17 Setting sharenfs Property Options on a ZFS File System The following commands show how to set sharenfs property options to enable rw access for a set of IP addresses and to enable root access for system neo on the tank/home file system. # # zfs set sharenfs='rw=@123.123.0.0/16,root=neo' tank/home If you are using DNS for host name resolution, specify the fully qualified hostname. Example 18 Delegating ZFS Administration Permissions on a ZFS Dataset The following example shows how to set permissions so that user cindys can create, destroy, mount, and take snapshots on tank/cindys. The permissions on tank/cindys are also displayed. # zfs allow cindys create,destroy,mount,snapshot tank/cindys # zfs allow tank/cindys ------------------------------------------------------------- Local+Descendent permissions on (tank/cindys) user cindys create,destroy,mount,snapshot ------------------------------------------------------------- Because the tank/cindys mount point permission is set to 755 by default, user cindys will be unable to mount file systems under tank/cindys. Set an ACL similar to the following syntax to provide mount point access: # chmod A+user:cindys:add_subdirectory:allow /tank/cindys Example 19 Delegating Create Time Permissions on a ZFS Dataset The following example shows how to grant anyone in the group staff to cre- ate file systems in tank/users. This syntax also allows staff members to destroy their own file systems, but not destroy anyone else's file system. The permissions on tank/users are also displayed. # # zfs allow staff create,mount tank/users # zfs allow -c destroy tank/users # zfs allow tank/users ------------------------------------------------------------- Create time permissions on (tank/users) create,destroy Local+Descendent permissions on (tank/users) group staff create,mount ------------------------------------------------------------- Example 20 Defining and Granting a Permission Set on a ZFS Dataset The following example shows how to define and grant a permission set on the tank/users file system. The permissions on tank/users are also displayed. # zfs allow -s @pset create,destroy,snapshot,mount tank/users # zfs allow staff @pset tank/users # zfs allow tank/users ------------------------------------------------------------- Permission sets on (tank/users) @pset create,destroy,mount,snapshot Create time permissions on (tank/users) create,destroy Local+Descendent permissions on (tank/users) group staff @pset,create,mount ------------------------------------------------------------- Example 21 Delegating Property Permissions on a ZFS Dataset The following example shows to grant the ability to set quotas and reserva- tions on the users/home file system. The permissions on users/home are also displayed. # zfs allow cindys quota,reservation users/home # zfs allow users/home ------------------------------------------------------------- Local+Descendent permissions on (users/home) user cindys quota,reservation ------------------------------------------------------------- cindys% zfs set quota=10G users/home/marks cindys% zfs get quota users/home/marks NAME PROPERTY VALUE SOURCE users/home/marks quota 10G local Example 22 Removing ZFS Delegated Permissions on a ZFS Dataset The following example shows how to remove the snapshot permission from the staff group on the tank/users file system. The permissions on tank/users are also displayed. # zfs unallow staff snapshot tank/users # zfs allow tank/users ------------------------------------------------------------- Permission sets on (tank/users) @pset create,destroy,mount,snapshot Create time permissions on (tank/users) create,destroy Local+Descendent permissions on (tank/users) group staff @pset,create,mount ------------------------------------------------------------- EXIT STATUS The following exit values are returned: 0 Successful completion. 1 An error occurred. 2 Invalid command line options were specified. ATTRIBUTES See attributes(5) for descriptions of the following attributes: +------------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +------------------------------+-----------------------------+ | Availability |SUNWzfsu | +------------------------------+-----------------------------+ | Interface Stability |Committed | +------------------------------+-----------------------------+ SEE ALSO ssh(1), iscsitadm(1M), mount(1M), share(1M), sharemgr(1M), unshare(1M), zonecfg(1M), zpool(1M), chmod(2), stat(2), write(2), fsync(3C), dfstab(4), attributes(5) See the gzip(1) man page, which is not part of the SunOS man page collec- tion. For information about using the ZFS web-based management tool and other ZFS features, see the Solaris ZFS Administration Guide. SunOS 5.11 24 Sep 2009 zfs(1M)
NAME | SYNOPSIS | DESCRIPTION | SUBCOMMANDS | EXAMPLES | EXIT STATUS | ATTRIBUTES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=zfs&manpath=FreeBSD+9.0-RELEASE>