home | help
SND_MSS(4)		     Kernel Interfaces Manual		      SND_MSS(4)

NAME
     snd_mss -- Microsoft Sound System ISA PnP/non-PnP bridge device driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device sound
	   device snd_mss

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   snd_mss_load="YES"

     Non-PnP cards require the following lines in device.hints(5):

	   hint.pcm.0.at="isa"
	   hint.pcm.0.irq="10"
	   hint.pcm.0.drq="1"
	   hint.pcm.0.flags="0x0"

DESCRIPTION
     The snd_mss bridge driver allows the generic audio driver, sound(4), to at-
     tach to the supported audio devices.

HARDWARE
     The snd_mss driver supports the following audio devices:

     *	 AD1845
     *	 AD1848
     *	 Aztech 2320
     *	 CMedia CMI8330
     *	 Crystal Semiconductor CS4231
     *	 Crystal Semiconductor CS4232
     *	 Crystal Semiconductor CS4234
     *	 Crystal Semiconductor CS4235
     *	 Crystal Semiconductor CS4236
     *	 Crystal Semiconductor CS4237
     *	 ENSONIQ SoundscapeVIVO ENS4081
     *	 NeoMagic 256AV (non-AC97)
     *	 OPTi 924
     *	 OPTi 925
     *	 OPTi 930
     *	 OPTi 931
     *	 OPTi 933
     *	 Yamaha OPL-SA2
     *	 Yamaha OPL-SA3

SEE ALSO
     sound(4)

HISTORY
     The snd_mss device driver first appeared in FreeBSD 2.2.6.

AUTHORS
     This manual page was written by Joel Dahl <joel@FreeBSD.org>.

FreeBSD 9.1			December 1, 2005		      SND_MSS(4)

home | help