FreeBSD Manual Pages
Tk_FindPhoto(3) Tk Library Procedures Tk_FindPhoto(3) ______________________________________________________________________________ NAME Tk_FindPhoto, Tk_PhotoPutBlock, Tk_PhotoPutZoomedBlock, Tk_PhotoGetIm- age, Tk_PhotoBlank, Tk_PhotoExpand, Tk_PhotoGetSize, Tk_PhotoSetSize - manipulate the image data stored in a photo image. SYNOPSIS #include <tk.h> Tk_PhotoHandle Tk_FindPhoto(interp, imageName) int Tk_PhotoPutBlock(interp, handle, blockPtr, x, y, width, height,compRule) int Tk_PhotoPutZoomedBlock(interp, handle, blockPtr, x, y, width, height,zoomX, zoomY, subsampleX, subsampleY, compRule) int Tk_PhotoGetImage(handle, blockPtr) void Tk_PhotoBlank(handle) int Tk_PhotoExpand(interp, handle, width, height) void Tk_PhotoGetSize(handle, widthPtr, heightPtr) int Tk_PhotoSetSize(interp. handle, width, height) ARGUMENTS Tcl_Interp *interp (in) Interpreter in which image was created and in which error reporting is to be done. const char *imageName (in) Name of the photo image. Tk_PhotoHandle handle (in) Opaque handle identifying the photo image to be af- fected. Tk_PhotoImageBlock *blockPtr (in) Specifies the address and storage layout of image data. int x (in) Specifies the X coordinate where the top-left corner of the block is to be placed within the image. int y (in) Specifies the Y coordinate where the top-left corner of the block is to be placed within the image. int width (in) Specifies the width of the image area to be affected (for Tk_PhotoPutBlock) or the desired image width (for Tk_PhotoExpand and Tk_PhotoSetSize). int compRule (in) Specifies the compositing rule used when combining transparent pixels in a block of data with a photo image. Must be one of TK_PHOTO_COMPOSITE_OVERLAY (which puts the block of data over the top of the existing photo image, with the previous contents showing through in the transparent bits) or TK_PHOTO_COMPOSITE_SET (which discards the exist- ing photo image contents in the rectangle covered by the data block.) int height (in) Specifies the height of the image area to be af- fected (for Tk_PhotoPut- Block) or the desired im- age height (for Tk_Photo- Expand and Tk_PhotoSet- Size). int *widthPtr (out) Pointer to location in which to store the image width. int *heightPtr (out) Pointer to location in which to store the image height. int subsampleX (in) Specifies the subsampling factor in the X direction for input image data. int subsampleY (in) Specifies the subsampling factor in the Y direction for input image data. int zoomX (in) Specifies the zoom factor to be applied in the X di- rection to pixels being written to the photo im- age. int zoomY (in) Specifies the zoom factor to be applied in the Y di- rection to pixels being written to the photo im- age. ______________________________________________________________________________ DESCRIPTION Tk_FindPhoto returns an opaque handle that is used to identify a par- ticular photo image to the other procedures. The parameter is the name of the image, that is, the name specified to the image create photo command, or assigned by that command if no name was specified. If ima- geName does not exist or is not a photo image, Tk_FindPhoto returns NULL. Tk_PhotoPutBlock is used to supply blocks of image data to be dis- played. The call affects an area of the image of size width x height pixels, with its top-left corner at coordinates (x,y). All of width, height, x, and y must be non-negative. If part of this area lies out- side the current bounds of the image, the image will be expanded to in- clude the area, unless the user has specified an explicit image size with the -width and/or -height widget configuration options (see photo(n)); in that case the area is silently clipped to the image boundaries. The block parameter is a pointer to a Tk_PhotoImageBlock structure, de- fined as follows: typedef struct { unsigned char *pixelPtr; int width; int height; int pitch; int pixelSize; int offset[4]; } Tk_PhotoImageBlock; The pixelPtr field points to the first pixel, that is, the top-left pixel in the block. The width and height fields specify the dimensions of the block of pixels. The pixelSize field specifies the address dif- ference between two horizontally adjacent pixels. It should be 4 for RGB and 2 for grayscale image data. Other values are possible, if the offsets in the offset array are adjusted accordingly (e.g. for red, green and blue data stored in different planes). Using such a layout is strongly discouraged, though. Due to a bug, it might not work cor- rectly if an alpha channel is provided. (see the BUGS section below). The pitch field specifies the address difference between two vertically adjacent pixels. The offset array contains the offsets from the ad- dress of a pixel to the addresses of the bytes containing the red, green, blue and alpha (transparency) components. If the offsets for red, green and blue are equal, the image is interpreted as grayscale. If they differ, RGB data is assumed. Normally the offsets will be 0, 1, 2, 3 for RGB data and 0, 0, 0, 1 for grayscale. It is possible to pro- vide image data without an alpha channel by setting the offset for al- pha to a negative value and adjusting the pixelSize field accordingly. This use is discouraged, though (see the BUGS section below). The compRule parameter to Tk_PhotoPutBlock specifies a compositing rule that says what to do with transparent pixels. The value TK_PHOTO_COM- POSITE_OVERLAY says that the previous contents of the photo image should show through, and the value TK_PHOTO_COMPOSITE_SET says that the previous contents of the photo image should be completely ignored, and the values from the block be copied directly across. The behavior in Tk8.3 and earlier was equivalent to having TK_PHOTO_COMPOSITE_OVERLAY as a compositing rule. The value given for the width and height parameters to Tk_PhotoPutBlock do not have to correspond to the values specified in block. If they are smaller, Tk_PhotoPutBlock extracts a sub-block from the image data supplied. If they are larger, the data given are replicated (in a tiled fashion) to fill the specified area. These rules operate inde- pendently in the horizontal and vertical directions. Tk_PhotoPutBlock normally returns TCL_OK, though if it cannot allocate sufficient memory to hold the resulting image, TCL_ERROR is returned instead and, if the interp argument is non-NULL, an error message is placed in the interpreter's result. Tk_PhotoPutZoomedBlock works like Tk_PhotoPutBlock except that the im- age can be reduced or enlarged for display. The subsampleX and subsam- pleY parameters allow the size of the image to be reduced by subsam- pling. Tk_PhotoPutZoomedBlock will use only pixels from the input im- age whose X coordinates are multiples of subsampleX, and whose Y coor- dinates are multiples of subsampleY. For example, an image of 512x512 pixels can be reduced to 256x256 by setting subsampleX and subsampleY to 2. The zoomX and zoomY parameters allow the image to be enlarged by pixel replication. Each pixel of the (possibly subsampled) input image will be written to a block zoomX pixels wide and zoomY pixels high of the displayed image. Subsampling and zooming can be used together for spe- cial effects. Tk_PhotoGetImage can be used to retrieve image data from a photo image. Tk_PhotoGetImage fills in the structure pointed to by the blockPtr pa- rameter with values that describe the address and layout of the image data that the photo image has stored internally. The values are valid until the image is destroyed or its size is changed. It is possible to modify an image by writing directly to the data the pixelPtr field points to. The size of the image cannot be changed this way, though. Also, changes made by writing directly to pixelPtr will not be immediately visible, but only after a call to Tk_ImageChanged or after an event that causes the interested widgets to redraw themselves. For these reasons usually it is preferable to make changes to a copy of the image data and write it back with Tk_PhotoPutBlock or Tk_PhotoPut- ZoomedBlock. Tk_PhotoGetImage returns 1 for compatibility with the corresponding procedure in the old photo widget. Tk_PhotoBlank blanks the entire area of the photo image. Blank areas of a photo image are transparent. Tk_PhotoExpand requests that the widget's image be expanded to be at least width x height pixels in size. The width and/or height are un- changed if the user has specified an explicit image width or height with the -width and/or -height configuration options, respectively. If the image data are being supplied in many small blocks, it is more ef- ficient to use Tk_PhotoExpand or Tk_PhotoSetSize at the beginning rather than allowing the image to expand in many small increments as image blocks are supplied. Tk_PhotoExpand normally returns TCL_OK, though if it cannot allocate sufficient memory to hold the resulting image, TCL_ERROR is returned instead and, if the interp argument is non-NULL, an error message is placed in the interpreter's result. Tk_PhotoSetSize specifies the size of the image, as if the user had specified the given width and height values to the -width and -height configuration options. A value of zero for width or height does not change the image's width or height, but allows the width or height to be changed by subsequent calls to Tk_PhotoPutBlock, Tk_PhotoPutZoomed- Block or Tk_PhotoExpand. Tk_PhotoSetSize normally returns TCL_OK, though if it cannot allocate sufficient memory to hold the resulting image, TCL_ERROR is returned instead and, if the interp argument is non-NULL, an error message is placed in the interpreter's result. Tk_PhotoGetSize returns the dimensions of the image in *widthPtr and *heightPtr. PORTABILITY In Tk 8.3 and earlier, Tk_PhotoPutBlock and Tk_PhotoPutZoomedBlock had different signatures. If you want to compile code that uses the old in- terface against 8.4 without updating your code, compile it with the flag -DUSE_COMPOSITELESS_PHOTO_PUT_BLOCK. Code linked using Stubs against older versions of Tk will continue to work. In Tk 8.4, Tk_PhotoPutBlock, Tk_PhotoPutZoomedBlock, Tk_PhotoExpand and Tk_PhotoSetSize did not take an interp argument or return any result code. If insufficient memory was available for an image, Tk would panic. This behaviour is still supported if you compile your extension with the additional flag -DUSE_PANIC_ON_PHOTO_ALLOC_FAILURE. Code linked using Stubs against older versions of Tk will continue to work. BUGS The Tk_PhotoImageBlock structure used to provide image data to Tk_Pho- toPutBlock promises great flexibility in the layout of the data (e.g. separate planes for the red, green, blue and alpha channels). Unfortu- nately, the implementation fails to hold this promise. The problem is that the pixelSize field is (incorrectly) used to determine whether the image has an alpha channel. Currently, if the offset for the alpha channel is greater than or equal to pixelSize, tk_PhotoPutblock assumes no alpha data is present and makes the image fully opaque. This means that for layouts where the channels are separate (or any other exotic layout where pixelSize has to be smaller than the alpha offset), the alpha channel will not be read correctly. In order to be on the safe side if this issue will be corrected in a future release, it is strongly recommended you always provide alpha data - even if the image has no transparency - and only use the "standard" layout with a pixel- Size of 2 for grayscale and 4 for RGB data with offsets of 0, 0, 0, 1 or 0, 1, 2, 3 respectively. CREDITS The code for the photo image type was developed by Paul Mackerras, based on his earlier photo widget code. KEYWORDS photo, image Tk 8.0 Tk_FindPhoto(3)
NAME | SYNOPSIS | ARGUMENTS | DESCRIPTION | PORTABILITY | BUGS | CREDITS | KEYWORDS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=Tk_PhotoGetImage.tk86&sektion=3&manpath=FreeBSD+Ports+14.3.quarterly>