FreeBSD Manual Pages
buildah-commit(1) General Commands Manual buildah-commit(1) NAME buildah-commit - Create an image from a working container. SYNOPSIS buildah commit [options] container [image] DESCRIPTION Writes a new image using the specified container's read-write layer and if it is based on an image, the layers of that image. If image does not begin with a registry name component, localhost will be added to the name. If image is not provided, the image will have no name. When an image has no name, the buildah images command will display <none> in the REPOSITORY and TAG columns. The image value supports all transports from containers-transports(5). If no transport is specified, the containers-storage (i.e., local stor- age) transport is used. RETURN VALUE The image ID of the image that was created. On error, 1 is returned and errno is returned. OPTIONS --add-file source[:destination] Read the contents of the file source and add it to the committed image as a file at destination. If destination is not specified, the path of source will be used. The new file will be owned by UID 0, GID 0, have 0644 permissions, and be given a current timestamp unless the --time- stamp option is also specified. This option can be specified multiple times. --authfile path Path of the authentication file. Default is ${XDG_RUNTIME_DIR}/contain- ers/auth.json. See containers-auth.json(5) for more information. This file is created using buildah login. If the authorization state is not found there, $HOME/.docker/con- fig.json is checked, which is set using docker login. Note: You can also override the default path of the authentication file by setting the REGISTRY_AUTH_FILE environment variable. export REG- ISTRY_AUTH_FILE=path --cert-dir path Use certificates at path (*.crt, *.cert, *.key) to connect to the reg- istry. The default certificates directory is /etc/containers/certs.d. --change, -c "INSTRUCTION" Apply the change to the committed image that would have been made if it had been built using a Containerfile which included the specified in- struction. This option can be specified multiple times. --config filename Read a JSON-encoded version of an image configuration object from the specified file, and merge the values from it with the configuration of the image being committed. --creds creds The [username[:password]] to use to authenticate with the registry if required. If one or both values are not supplied, a command line prompt will appear and the value can be entered. The password is en- tered without echo. --cw options Produce an image suitable for use as a confidential workload running in a trusted execution environment (TEE) using krun (i.e., crun built with the libkrun feature enabled and invoked as krun). Instead of the con- ventional contents, the root filesystem of the image will contain an encrypted disk image and configuration information for krun. The value for options is a comma-separated list of key=value pairs, supplying configuration information which is needed for producing the additional data which will be included in the container image. Recognized keys are: attestation_url: The location of a key broker / attestation server. If a value is specified, the new image's workload ID, along with the passphrase used to encrypt the disk image, will be registered with the server, and the server's location will be stored in the container im- age. At run-time, krun is expected to contact the server to retrieve the passphrase using the workload ID, which is also stored in the con- tainer image. If no value is specified, a passphrase value must be specified. cpus: The number of virtual CPUs which the image expects to be run with at run-time. If not specified, a default value will be supplied. firmware_library: The location of the libkrunfw-sev shared library. If not specified, buildah checks for its presence in a number of hard- coded locations. memory: The amount of memory which the image expects to be run with at run-time, as a number of megabytes. If not specified, a default value will be supplied. passphrase: The passphrase to use to encrypt the disk image which will be included in the container image. If no value is specified, but an attestation_url value is specified, a randomly-generated passphrase will be used. The authors recommend setting an attestation_url but not a passphrase. slop: Extra space to allocate for the disk image compared to the size of the container image's contents, expressed either as a percentage (..%) or a size value (bytes, or larger units if suffixes like KB or MB are present), or a sum of two or more such specifications separated by "+". If not specified, buildah guesses that 25% more space than the contents will be enough, but this option is provided in case its guess is wrong. If the specified or computed size is less than 10 megabytes, it will be increased to 10 megabytes. type: The type of trusted execution environment (TEE) which the image should be marked for use with. Accepted values are "SEV" (AMD Secure Encrypted Virtualization - Encrypted State) and "SNP" (AMD Secure En- crypted Virtualization - Secure Nested Paging). If not specified, de- faults to "SNP". workload_id: A workload identifier which will be recorded in the con- tainer image, to be used at run-time for retrieving the passphrase which was used to encrypt the disk image. If not specified, a semi- random value will be derived from the base image's image ID. --disable-compression, -D Don't compress filesystem layers when building the image unless it is required by the location where the image is being written. This is the default setting, because image layers are compressed automatically when they are pushed to registries, and images being written to local stor- age would only need to be decompressed again to be stored. Compression can be forced in all cases by specifying --disable-compression=false. --encrypt-layer layer(s) Layer(s) to encrypt: 0-indexed layer indices with support for negative indexing (e.g. 0 is the first layer, -1 is the last layer). If not de- fined, will encrypt all layers if encryption-key flag is specified. --encryption-key key The [protocol:keyfile] specifies the encryption protocol, which can be JWE (RFC7516), PGP (RFC4880), and PKCS7 (RFC2315) and the key material required for image encryption. For instance, jwe:/path/to/key.pem or pgp:admin@example.com or pkcs7:/path/to/x509-file. --format, -f [oci | docker] Control the format for the image manifest and configuration data. Rec- ognized formats include oci (OCI image-spec v1.0, the default) and docker (version 2, using schema format 2 for the manifest). Note: You can also override the default format by setting the BUIL- DAH_FORMAT environment variable. export BUILDAH_FORMAT=docker --identity-label bool-value Adds default identity label io.buildah.version if set. (default true). --iidfile ImageIDfile Write the image ID to the file. --manifest "listName" Name of the manifest list to which the built image will be added. Cre- ates the manifest list if it does not exist. This option is useful for building multi architecture images. --omit-history bool-value Omit build history information in the built image. (default false). This option is useful for the cases where end users explicitly want to set --omit-history to omit the optional History from built images or when working with images built using build tools that do not include History information in their images. --pull When the --pull flag is enabled or set explicitly to true (with --pull=true), attempt to pull the latest versions of SBOM scanner im- ages from the registries listed in registries.conf if a local SBOM scanner image does not exist or the image in the registry is newer than the one in local storage. Raise an error if the SBOM scanner image is not in any listed registry and is not present locally. If the flag is disabled (with --pull=false), do not pull SBOM scanner images from registries, use only local versions. Raise an error if a SBOM scanner image is not present locally. If the pull flag is set to always (with --pull=always), pull SBOM scan- ner images from the registries listed in registries.conf. Raise an er- ror if a SBOM scanner image is not found in the registries, even if an image with the same name is present locally. If the pull flag is set to missing (with --pull=missing), pull SBOM scanner images only if they could not be found in the local containers storage. Raise an error if no image could be found and the pull fails. If the pull flag is set to never (with --pull=never), do not pull SBOM scanner images from registries, use only the local versions. Raise an error if the image is not present locally. --quiet, -q When writing the output image, suppress progress output. --rm Remove the working container and its contents after creating the image. Default leaves the container and its content in place. --sbom preset Generate SBOMs (Software Bills Of Materials) for the output image by scanning the working container and build contexts using the named com- bination of scanner image, scanner commands, and merge strategy. Must be specified with one or more of --sbom-image-output, --sbom-image- purl-output, --sbom-output, and --sbom-purl-output. Recognized pre- sets, and the set of options which they equate to: • "syft", "syft-cyclonedx": --sbom-scanner-image=ghcr.io/anchore/syft --sbom-scanner-command="/syft scan -q dir:{ROOTFS} --output cyclonedx-json={OUTPUT}" --sbom-scanner-command="/syft scan -q dir:{CONTEXT} --output cyclonedx-json={OUTPUT}" --sbom-merge-strategy=merge-cyclonedx-by-component-name-and- version • "syft-spdx": --sbom-scanner-image=ghcr.io/anchore/syft --sbom-scanner-command="/syft scan -q dir:{ROOTFS} --output spdx-json={OUTPUT}" --sbom-scanner-command="/syft scan -q dir:{CONTEXT} --output spdx-json={OUTPUT}" --sbom-merge-strategy=merge-spdx-by-package-name-and-version- info • "trivy", "trivy-cyclonedx": --sbom-scanner-image=ghcr.io/aquasecurity/trivy --sbom-scanner-command="trivy filesystem -q {ROOTFS} --format cyclonedx --output {OUTPUT}" --sbom-scanner-command="trivy filesystem -q {CONTEXT} --for- mat cyclonedx --output {OUTPUT}" --sbom-merge-strategy=merge-cyclonedx-by-component-name-and- version • "trivy-spdx": --sbom-scanner-image=ghcr.io/aquasecurity/trivy --sbom-scanner-command="trivy filesystem -q {ROOTFS} --format spdx-json --output {OUTPUT}" --sbom-scanner-command="trivy filesystem -q {CONTEXT} --for- mat spdx-json --output {OUTPUT}" --sbom-merge-strategy=merge-spdx-by-package-name-and-version- info --sbom-image-output path When generating SBOMs, store the generated SBOM in the specified path in the output image. There is no default. --sbom-image-purl-output path When generating SBOMs, scan them for PURL (package URL <https://github.com/package-url/purl-spec/blob/master/PURL-SPECIFICA- TION.rst>) information, and save a list of found PURLs to the named file in the local filesystem. There is no default. --sbom-merge-strategy method If more than one --sbom-scanner-command value is being used, use the specified method to merge the output from later commands with output from earlier commands. Recognized values include: • cat Concatenate the files. • merge-cyclonedx-by-component-name-and-version Merge the "component" fields of JSON documents, ignoring val- ues from documents when the combination of their "name" and "version" values is already present. Documents are processed in the order in which they are generated, which is the order in which the commands that gen- erate them were specified. • merge-spdx-by-package-name-and-versioninfo Merge the "package" fields of JSON documents, ignoring values from documents when the combination of their "name" and "version- Info" values is already present. Documents are processed in the order in which they are generated, which is the order in which the commands that gen- erate them were specified. --sbom-output file When generating SBOMs, store the generated SBOM in the named file on the local filesystem. There is no default. --sbom-purl-output file When generating SBOMs, scan them for PURL (package URL <https://github.com/package-url/purl-spec/blob/master/PURL-SPECIFICA- TION.rst>) information, and save a list of found PURLs to the named file in the local filesystem. There is no default. --sbom-scanner-command image Generate SBOMs by running the specified command from the scanner image. If multiple commands are specified, they are run in the order in which they are specified. These text substitutions are performed: - {ROOTFS} The root of the built image's filesystem, bind mounted. - {CONTEXT} The build context and additional build contexts, bind mounted. - {OUTPUT} The name of a temporary output file, to be read and merged with others or copied elsewhere. --sbom-scanner-image image Generate SBOMs using the specified scanner image. --sign-by fingerprint Sign the new image using the GPG key that matches the specified finger- print. --squash Squash all of the new image's layers (including those inherited from a base image) into a single new layer. --timestamp seconds Set the create timestamp to seconds since epoch to allow for determin- istic builds (defaults to current time). By default, the created time- stamp is changed and written into the image manifest with every commit, causing the image's sha256 hash to be different even if the sources are exactly the same otherwise. When --timestamp is set, the created time- stamp is always set to the time specified and therefore not changed, allowing the image's sha256 to remain the same. All files committed to the layers of the image will be created with the timestamp. --tls-verify bool-value Require HTTPS and verification of certificates when talking to con- tainer registries (defaults to true). TLS verification cannot be used when talking to an insecure registry. --unsetenv env Unset environment variables from the final image. EXAMPLE This example saves an image based on the container. buildah commit containerID newImageName This example saves an image named newImageName based on the container and removes the working container. buildah commit --rm containerID newImageName This example commits to an OCI archive file named /tmp/newImageName based on the container. buildah commit containerID oci-archive:/tmp/newImageName This example saves an image with no name, removes the working con- tainer, and creates a new container using the image's ID. buildah from $(buildah commit --rm containerID) This example saves an image based on the container disabling compres- sion. buildah commit --disable-compression containerID This example saves an image named newImageName based on the container disabling compression. buildah commit --disable-compression containerID newImageName This example commits the container to the image on the local registry while turning off tls verification. buildah commit --tls-verify=false containerID docker://local- host:5000/imageId This example commits the container to the image on the local registry using credentials and certificates for authentication. buildah commit --cert-dir ~/auth --tls-verify=true --creds=user- name:password containerID docker://localhost:5000/imageId This example commits the container to the image on the local registry using credentials from the /tmp/auths/myauths.json file and certifi- cates for authentication. buildah commit --authfile /tmp/auths/myauths.json --cert-dir ~/auth --tls-verify=true --creds=username:password containerID docker://local- host:5000/imageName This example saves an image based on the container, but stores dates based on epoch time. buildah commit --timestamp=0 containerID newIma- geName Building an multi-architecture image using the --manifest option (requires emulation software) #!/bin/sh build() { ctr=$(./bin/buildah from --arch $1 ubi8) ./bin/buildah run $ctr dnf install -y iputils ./bin/buildah commit --manifest ubi8ping $ctr } build arm build amd64 build s390x ENVIRONMENT BUILD_REGISTRY_SOURCES BUILD_REGISTRY_SOURCES, if set, is treated as a JSON object which con- tains lists of registry names under the keys insecureRegistries, blockedRegistries, and allowedRegistries. When committing an image, if the image is to be given a name, the por- tion of the name that corresponds to a registry is compared to the items in the blockedRegistries list, and if it matches any of them, the commit attempt is denied. If there are registries in the allowedReg- istries list, and the portion of the name that corresponds to the reg- istry is not in the list, the commit attempt is denied. TMPDIR The TMPDIR environment variable allows the user to specify where temporary files are stored while pulling and pushing images. Defaults to '/var/tmp'. FILES registries.conf (/etc/containers/registries.conf) registries.conf is the configuration file which specifies which con- tainer registries should be consulted when completing image names which do not include a registry or domain portion. policy.json (/etc/containers/policy.json) Signature policy file. This defines the trust policy for container im- ages. Controls which container registries can be used for image, and whether or not the tool should trust the images. SEE ALSO buildah(1), buildah-images(1), containers-policy.json(5), containers- registries.conf(5), containers-transports(5), containers-auth.json(5) buildah March 2017 buildah-commit(1)
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | OPTIONS | EXAMPLE | ENVIRONMENT | FILES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=buildah-commit&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>