FreeBSD Manual Pages
CRYPT(5) File Formats Manual CRYPT(5) NAME crypt -- storage format for hashed passphrases and available hashing methods DESCRIPTION The hashing methods implemented by crypt(3) are designed only to process user passphrases for storage and authentication; they are not suitable for use as general-purpose cryptographic hashes. Passphrase hashing is not a replacement for strong passphrases. It is always possible for an attacker with access to the hashed passphrases to guess and check possible cleartext passphrases. However, with a strong hashing method, guessing will be too slow for the attacker to discover a strong passphrase. Most of the hashing methods use a "salt" to perturb the hash function, so that the same passphrase may produce many possible hashes. Newer methods accept longer salt strings. The salt should be chosen at ran- dom for each user. Salt defeats a number of attacks: 1. It is not possible to hash a passphrase once and then test it against each account's stored hash; the hash calculation must be repeated for each account. 2. It is not possible to tell whether two accounts use the same passphrase without successfully guessing one of the phrases. 3. Tables of precalculated hashes of commonly used passphrases must have an entry for each possible salt, which makes them impracti- cally large. Most of the hashing methods are also deliberately engineered to be slow; they use many iterations of an underlying cryptographic primitive to increase the cost of each guess. The newer hashing methods allow the number of iterations to be adjusted, using the "processing cost" parameter to crypt_gensalt(3). For memory-hard hashing methods such as yescrypt, this parameter also adjusts the amount of memory needed to compute a hash. Having this configurable makes it possible to keep password guessing attacks against the hashes slow and costly as hard- ware improves. FORMAT OF HASHED PASSPHRASES All of the hashing methods supported by crypt(3) produce a hashed passphrase which consists of four components: prefix, options, salt, and hash. The prefix controls which hashing method is to be used, and is the appropriate string to pass to crypt_gensalt(3) to select that method. The contents of options, salt, and hash are up to the method. Depending on the method, the prefix and options components may be empty. The setting argument to crypt(3) must begin with the first three compo- nents of a valid hashed passphrase, but anything after that is ignored. This makes authentication simple: hash the input passphrase using the stored hashed passphrase as the setting, and then compare the result to the stored hashed passphrase. Hashed passphrases are always entirely printable ASCII, and do not con- tain any whitespace or the characters `:', `;', `*', `!', or `\'. (These characters are used as delimiters and special markers in the passwd(5) and shadow(5) files.) The syntax of each component of a hashed passphrase is up to the hash- ing method. `$' characters usually delimit components, and the salt and hash are usually encoded as numerals in base 64. The details of this base-64 encoding vary among hashing methods. The common "base64" encoding specified by RFC 4648 is usually not used. AVAILABLE HASHING METHODS This is a list of all the hashing methods supported by crypt(3), roughly in decreasing order of strength. Many of the older methods are now considered too weak to use for new passphrases. The hashed passphrase format is expressed with extended regular expressions (see regex(7)) and does not show the division into prefix, options, salt, and hash. yescrypt yescrypt is a scalable passphrase hashing scheme designed by Solar De- signer, which is based on Colin Percival's scrypt. While yescrypt's strength against password guessing attacks comes from its algorithm de- sign, its cryptographic security is guaranteed by its use of SHA-256 on the outer layer. The SHA-256 hash function has been published by NIST in FIPS PUB 180-2 (and its subsequent revisions such as FIPS PUB 180-4) and by the IETF as RFC 4634 (and subsequently RFC 6234). Recommended for new hashes. Prefix "$y$" Hashed passphrase format \$y\$[./A-Za-z0-9]+\$[./A-Za-z0-9]{,86}\$[./A-Za-z0-9]{43} Maximum passphrase length unlimited Hash size 256 bits Salt size up to 512 (128+ recommended) bits Processing cost parameter 1 to 11 (logarithmic, also affects memory usage) gost-yescrypt gost-yescrypt uses the output from yescrypt as an input message to HMAC with the GOST R 34.11-2012 (Streebog) hash function with a 256-bit di- gest. Thus, yescrypt's cryptographic properties are superseded by those of the GOST hash function. This hashing method is useful in ap- plications that need modern passphrase hashing, but have to rely on GOST algorithms. The GOST R 34.11-2012 (Streebog) hash function has been published by the IETF as RFC 6986. Acceptable for new hashes where required. Prefix "$gy$" Hashed passphrase format \$gy\$[./A-Za-z0-9]+\$[./A-Za-z0-9]{,86}\$[./A-Za-z0-9]{43} Maximum passphrase length unlimited Hash size 256 bits Salt size up to 512 (128+ recommended) bits Processing cost parameter 1 to 11 (logarithmic, also affects memory usage) scrypt scrypt is a password-based key derivation function created by Colin Percival, originally for the Tarsnap online backup service. The algo- rithm was specifically designed to make it costly to perform large- scale custom hardware attacks by requiring large amounts of memory. In 2016, the scrypt algorithm was published by IETF as RFC 7914. Prefix "$7$" Hashed passphrase format \$7\$[./A-Za-z0-9]{11,97}\$[./A-Za-z0-9]{43} Maximum passphrase length unlimited Hash size 256 bits Salt size up to 512 (128+ recommended) bits Processing cost parameter 6 to 11 (logarithmic, also affects memory usage) bcrypt A hash based on the Blowfish block cipher, modified to have an extra- expensive key schedule. Originally developed by Niels Provos and David Mazieres for OpenBSD and also supported on recent versions of FreeBSD and NetBSD, on Solaris 10 and newer, and on several GNU/*/Linux distri- butions. Prefix "$2b$" Hashed passphrase format \$2[abxy]\$[0-9]{2}\$[./A-Za-z0-9]{53} Maximum passphrase length 72 characters Hash size 184 bits Salt size 128 bits Processing cost parameter 4 to 31 (logarithmic) The alternative prefix "$2y$" is equivalent to "$2b$". It exists for historical reasons only. The alternative prefixes "$2a$" and "$2x$" provide bug-compatibility with crypt_blowfish 1.0.4 and earlier, which incorrectly processed characters with the 8th bit set. sha512crypt A hash based on SHA-2 with 512-bit output, originally developed by Ul- rich Drepper for GNU libc. Supported on Linux but not common else- where. Acceptable for new hashes. The default processing cost parame- ter is 5000, which is too low for modern hardware. Prefix "$6$" Hashed passphrase format \$6\$(rounds=[1-9][0-9]+\$)?[^$:\n]{1,16}\$[./0-9A-Za-z]{86} Maximum passphrase length unlimited Hash size 512 bits Salt size 6 to 96 bits Processing cost parameter 1000 to 999,999,999 sha256crypt A hash based on SHA-2 with 256-bit output, originally developed by Ul- rich Drepper for GNU libc. Supported on Linux but not common else- where. Acceptable for new hashes. The default processing cost parame- ter is 5000, which is too low for modern hardware. Prefix "$5$" Hashed passphrase format \$5\$(rounds=[1-9][0-9]+\$)?[^$:\n]{1,16}\$[./0-9A-Za-z]{43} Maximum passphrase length unlimited Hash size 256 bits Salt size 6 to 96 bits Processing cost parameter 1000 to 999,999,999 sha1crypt A hash based on HMAC-SHA1. Originally developed by Simon Gerraty for NetBSD. Not as weak as the DES-based hashes below, but SHA-1 is so cheap on modern hardware that it should not be used for new hashes. Prefix "$sha1" Hashed passphrase format \$sha1\$[1-9][0-9]+\$[./0-9A-Za-z]{1,64}\$[./0-9A-Za- z]{8,64}[./0-9A-Za-z]{32} Maximum passphrase length unlimited Hash size 160 bits Salt size 6 to 384 bits Processing cost parameter 4 to 4,294,967,295 SunMD5 A hash based on the MD5 algorithm, originally developed by Alec David Muffett for Solaris. Not adopted elsewhere, to our knowledge. Not as weak as the DES-based hashes below, but MD5 is so cheap on modern hard- ware that it should not be used for new hashes. Prefix "$md5" Hashed passphrase format \$md5(,rounds=[1-9][0-9]+)?\$[./0-9A-Za-z]{8}\${1,2}[./0-9A-Za- z]{22} Maximum passphrase length unlimited Hash size 128 bits Salt size 48 bits Processing cost parameter 4096 to 4,294,963,199 md5crypt A hash based on the MD5 algorithm, originally developed by Poul-Henning Kamp for FreeBSD. Supported on most free Unixes and newer versions of Solaris. Not as weak as the DES-based hashes below, but MD5 is so cheap on modern hardware that it should not be used for new hashes. Processing cost is not adjustable. Prefix "$1$" Hashed passphrase format \$1\$[^$:\n]{1,8}\$[./0-9A-Za-z]{22} Maximum passphrase length unlimited Hash size 128 bits Salt size 6 to 48 bits Processing cost parameter 1000 bsdicrypt (BSDI extended DES) An extension of traditional DES, which eliminates the length limit, in- creases the salt size, and makes the time cost tunable. It originates with BSDI BSD/OS and is also available on at least NetBSD, OpenBSD, and FreeBSD due to the use of David Burren's FreeSec library. It is much better than traditional DES and bigcrypt, but still should not be used for new hashes. Prefix "_" Hashed passphrase format _[./0-9A-Za-z]{19} Maximum passphrase length unlimited (ignores 8th bit) Hash size 64 bits Effective key size up to 56 bits Salt size 24 bits Processing cost parameter 1 to 16,777,215 (must be odd) descrypt (Traditional DES) The original hashing method from Unix V7, based on the DES block ci- pher. Because DES is cheap on modern hardware, because there are only 4096 possible salts and 2**56 distinct passphrases, which it truncates to 8 characters, it is feasible to discover any passphrase hashed with this method. It should only be used if you absolutely have to generate hashes that will work on an old operating system that supports nothing else. Prefix "" (empty string) Hashed passphrase format [./0-9A-Za-z]{13} Maximum passphrase length 8 characters (ignores 8th bit) Hash size 64 bits Effective key size up to 56 bits Salt size 12 bits Processing cost parameter 25 bigcrypt A weak extension of traditional DES, available on some commercial Unixes. All it does is raise the length limit from 8 to 128 charac- ters, and it does this in a crude way that allows attackers to guess chunks of a long passphrase separately and in parallel, which may make guessing even easier than for traditional DES above. It should not be used for new hashes. Prefix "" (empty string) Hashed passphrase format [./0-9A-Za-z]{13,178} Maximum passphrase length 128 characters (ignores 8th bit) Hash size up to 1024 bits Effective key size up to 56 bits Salt size 12 bits Processing cost parameter 25 NT The hashing method used for network authentication in some versions of the SMB/CIFS protocol. Available, for cross-compatibility's sake, on FreeBSD. Based on MD4. Has no salt or tunable cost parameter. It is so weak that almost any human-chosen passphrase hashed with this method is guessable. It should only be used if you absolutely have to gener- ate hashes that will work on an old operating system that supports nothing else. Prefix "$3$" Hashed passphrase format \$3\$\$[0-9a-f]{32} Maximum passphrase length unlimited Hash size 256 bits Salt size 0 bits Processing cost parameter 1 SEE ALSO crypt(3), crypt_gensalt(3), getpwent(3), passwd(5), shadow(5), pam(8) Niels Provos and David Mazieres, "A Future-Adaptable Password Scheme", Proceedings of the 1999 USENIX Annual Technical Conference, https://www.usenix.org/events/usenix99/provos.html, June 1999. Robert Morris and Ken Thompson, "Password Security: A Case History", Communications of the ACM, 11, 22, http://wolfram.schneider.org/bsd/7thEdManVol2/password/password.pdf, 1979. Openwall Project March 27, 2024 CRYPT(5)
NAME | DESCRIPTION | FORMAT OF HASHED PASSPHRASES | AVAILABLE HASHING METHODS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=crypt&sektion=5&manpath=FreeBSD+Ports+14.3.quarterly>