FreeBSD Manual Pages
DWARFDUMP() DWARFDUMP() NAME dwarfdump - dumps DWARF debug information of an ELF object SYNOPSIS dwarfdump [options] objectfilename DESCRIPTION The dwarfdump command prints or checks DWARF sections as requested by specific options. With no options (but with the required objectfile- name ) all sections print (but some sections cannot be printed indepen- dently safely, so those are only printed at offsets where the .de- bug_info section refers to those sections). As of June 2011 the printing options and the checking options are mutu- ally exclusive (if checking options are selected the section details are not printed). When errors are encountered dwarfdump does attempt to print sufficient context so that one can understand exactly where the error is in the DWARF. This change makes checking really large object files much easier. The format is intended to be human readable. If a script is to parse the output, the -d option is useful. Not all sections actually exist in any given object file. The format may change from release to release, so it is unwise to de- pend too heavily on the format. Frame information (.debug_frame and .eh_frame) is heavily dependent on the ABI/ISA of the object file. By default we use a generic set of register names handling up to 100 registers named r0-100. The '-R' op- tion uses a built-in generic register name set handling up to 1200 reg- isters named r0-r1199. The '-x abi=<abi>' description below shows how to name an abi and use that to guide the -f or -F processing. Unless the cpu for the object file being dumped has many registers, do not use -R or -x abi=generic as those can be needlessly slow dumping frame sec- tions. Instead, use the correct abi (if it exists in dwarfdump.conf) or a generic such as -x abi=generic100 or -x abi=generic500. To get MIPS/IRIX register names names and call the old version 2 libdwarf frame interface use the option '-x abi=mips'. Without '-R' or '-x abi=<abi>' dwarfdump ignores the dwarfdump.conf file and uses compiled- in generic set of register names. If no '-x name=<path>' is given, dwarfdump looks for "./dwarfdump.conf", "$HOME/.dwarfdump.conf", "<in- stall-prefix>/lib/dwarfdump.conf" and takes the first it finds. If one or more '-x name=<path>' is given the last of these is used and all other such files are ignored. If '-x nosanitizestrings' is given then unprintable characters are not translated to '%xx' (two digit hex preceded by the '%' character) (with this option bogus characters in strings could cause terminal win- dows to behave oddly). Some -k (checking) options print so-called harmless errors. These are compiler errors that do not cause any known problem and are only de- tected inside libdwarf itself. These are difficult to properly report in dwarfdump and any error strings may not appear close to the time the error was encountered. If zlib compression was used on the DWARF sections in the object file being read the real section names such as .zdebug_info etc will be re- ported by dwarfdump. When dwarfdump says something is at offset 55 of .zdebug_info (or the like) keep in mind that the offset applies to the uncompressed section (in memory), not the .zdebug_ compressed section in objectfilename. URI STYLE INPUT STRINGS The <objectfilename> and the options taking name strings look for URIs and translate the URI strings to characters by default (see -x, -c<com- piler name>, -S, -u). So any single % character is treated as if the following two characters are hex digits representing the underlying true character. Various characters are meaningful to shells (such as bash or sh) and to getopt (such as the space character) If the URI translation does anything it prints the before and after of the URI translation on standard output, so inspection of the first lines of output will show if URI did anything. The actual options themselves are assumed to be non-URI. So in the option '-cS&T' the -c portion must be non-URI, but the & character might cause input issues so '-cS%26T' could be used instead. To actually input a single % charac- ter (in a name, for example), double it to %% on the command line. Options -U (turning off URI interpretation) and -q (making finding URI sequences silent) give finer control of URI interpretation. PP As an example, to get a string'a b' make the string 'a%20b' (here the quote (') is for exposition not part of the string, though quote is certainly problematic in a name). Instead of escaping " quotes in the string, type %25, as in 'a "b' should be typed 'a%20%25b' Any characters can be typed in URI style, not just characters which are problematic to the shell or getopt. We strongly suggest you not type URI-style characters where such are not needed or use the % character itself in command line strings unless you must. PRINTING OPTIONS -a Print each section as independently as possible. Sections that can safely be printed independently (like .debug_abbrev) have relevant info printed in the report (sometimes dependent on -v). -b Print the .debug_abbrev section. Because the DWARF specifica- tions do not rule out garbage data areas in .debug_abbrev (if they are not referenced from .debug_info) any garbage bytes can result in this print failing. -c Print locations lists. -E Print ELF header information and index, address and size for all sections. -Eh Effectively does nothing (use another tool to print the Elf file header). -El Print index, address and size for the .debug_line section. -Ei Print index, address and size for the .debug_info section. -Ea Print index, address and size for the .debug_abbrev section. -Ep Print index, address and size for the .debug_pubnames section. -Er Print index, address and size for the .debug_aranges section. -Ef Print index, address and size for the .debug_frame section. -Eo Print index, address and size for the .debug_loc section. -ER Print index, address and size for the .debug_ranges section. -Es Print index, address and size for the .debug_string section. -Et Print index, address and size for the .debug_pubtypes section. -Ex Print index, address and size for the .text section. -Ed Print index, address and size for the .text and .debug_* sec- tions. -f Print the .debug_frame section. -F Print the .eh_frame section. -h Print IRIX exception tables (unsupported). -i Print the .debug_info section. -I Print the .gdb_index, .debug_cu_index, .debug_tu_index sections if any exist. -l Print the .debug_info section and the associated line section data. -ls Print the .debug_info section and the associated line section data, but omits the <pc> address. Useful when a comparison is required. -m Print the .debug_macinfo section. -N Print .debug_ranges section. Because the DWARF specifications do not rule out garbage data areas in .debug_ranges (if they are not referenced from .debug_info) any garbage bytes can result in this print failing. -p Print the .debug_pubnames section. -r Print the .debug_aranges section. -s Print .debug_string section. -ta Print the IRIX only sections .debug_static_funcs and .debug_sta- tic_vars. -tf Print the IRIX only section .debug_static_funcs. -tv Print the IRIX only section .debug_static_vars. -w Print the IRIX-only .debug_weaknames section. -y Print the .debug_pubtypes section (and .debug_typenames, an SGI IRIX-only section). Having dwarfdump print relocations may help establish whether dwarfdump understands any relocations that might exist. -o Print all relocation records as well as we can manage. -oi Print .rel*debug_info relocations. -ol Print .rel*debug_line relocation. -op Print .rel*debug_pubnames relocation. -oa Has no effect. -or Print .rel*debug_aranges relocations. -of Print .rel*debug_frame relocations. -oo Print .rel*debug_loc relocations. -oR Print .rel*debug_ranges relocations. -g Normally used only for testing libdwarf, this tells dwarfdump to use an older dwarf_loclist() interface function (a function that cannot handle all DWARF4 or DWARF5 location lists). Before No- vember 2015 it implied -i, now you should use -i -g to also get .debug_info printed. -V Print a dwarfdump date/version string and stop. CHECKING OPTIONS -cg Restricts checking to compilers whose producer string starts with 'GNU' and turns off -cs. -cs Restricts checking to compilers whose producer string starts with 'SN' and turns off -cg. -cname Restricts checking to compilers whose producer string contains 'name' (not case sensitive). The 'name' is read as a URI string. -ka Turns on all checking options except -kxe (-kxe might be slow enough one mignt not want to use it routinely.) -kb Checks for certain abbreviations section errors when reading DIEs. -kc Checks for errors in constants in debug_info. -kd Turns on full reporting of error totals per producer. (the de- fault shows less detail). -kD Turns on reporting of duplicated attributes. Duplicated attrib- utes on a single DW_TAG are improper DWARF, but at least one compiler emitted such. -ke Turns on reading pubnames and checking for fde errors. -kE Checks the integer encoding representation in debug_info, com- puting whether these integer values could fit in fewer bytes if represented in LEB128. -kf Turns on checking for FDE errors. -kF Turns on checking for line table errors. -kg Turns on checking for unused gaps in .debug_info (these gaps are not an error, just a waste of space). -kG Print only unique errors. Error lines are simpified (hex numbers removed, for example) and when a given message string would oth- erwise appear again it is suppressed. -ki Causes a summary of checking results per compiler (producer) to be printed at the end. -kl Turns on locations list checking. -km Turns on checking of ranges. -kM Turns on checking of aranges. -kr Turns on DIE tag-attr combinations checking. -kR Turns on reading DIEs and checking for forward declarations rom DW_AT_specification attributes. (which are not an error but can be a source of inefficiency for debuggers). -ks Turns on extra reporting for some DIE errors checking detects. -kS Turns on checking DIE references for circular references. -kt Turns on tag-tag combinations checking. -ku Print tag-tree and tag-attribute usage (basic format). -kuf Print tag-tree and tag-attribute usage (full format). For stan- dard TAGs and ATtributes this presents an overview of how they were used. -kx Turns on check_frames. -kxe Turns off basic check_frames and turns on extended frame check- ing. -ky Turns on type_offset, decl_file checking, OPTION MODIFIERS -C Normally when checking for tag-tag or tag-attribute combinations both the standard combinations and some common extensions are allowed. With -C the extensions are taken out of the allowed class of combinations. -d When printing DIEs, put all the attributes for each DIE on the same (long) line as the TAG. This makes searching for DIE infor- mation (as with grep) much simpler as the entire DIE is on one line. -D Turns off the display of section offsets and attribute values in printed output. So the .debug_info output is just TAGs and At- tributes. For pubnames (and the like) it removes offsets from the output. For locations lists it removes offsets from the output, but that is useless since the attribute values don't show so neither does the location data. -e Turns on truncation of attribute and tag names. For example DW_TAG_foo becomes foo. Not compatible with checking, only use- ful for printing DIEs. -G When printing, add global offsets to the offsets printed. -H number When printing or checking .debug_info, this terminates the search after 'number' compilation units. When printing frame in- formation this terminates the FDE reporting after 'number' FDEs and the CIE reporting (which occurs if one adds -v) after 'num- ber' CIEs. Example '-H 1' -M When printing, this means one want to have the FORM show for each attribute. If a -v is also added (or more than one) then details of any form indirection are also shown. -n When printing frames, this turns off the search for function names. In a really large object the search can take more time than one wants to wait, so this avoids the search. -O file=<path> The <path> will be used as the file name for output instead of writing to stdout (stdout is the default). -Q Suppresses section data printing (set automatically with a checking option). -R When printing frames for ABIs with lots of registers, this al- lows up to 1200 registers to be named (like R999) without choos- ing an ABI with, for example '-x abi=ppc' -v Increases the detail shown when printing. In some sections, us- ing more -v options will increase the detail (one to three are useful) or may change the report to show, for example, the ac- tual line-data-commands instead of the resultant line-table. SELECTIVE ENTRY PRINTING These -S options stand alone and basic print information about the com- pilation unit and DIE where the string(s) appear. At most one of each of the following is effective (so for example one can only have one 'match', but one can have a 'match', an 'any', and a 'regex'). Any -S causes the .debug_info section to be inspected. No checking options or printing options should be supplied with -S. If v is added to the -S option, the number of occurrences is printed. (see below for an example). -S match=string When printing DIEs for each tag value or attribute name that matches 'string' exactly print the compilation unit information and its section offset. Any CU with no match is not printed. The 'string' is read as a URI string. -S any=string When printing DIEs for each tag value or attribute name that contains 'string' somewhere in the tag or attribute (case insen- sitive) print the compilation unit information and its section offset. Any CU with no match is not printed. The 'string' is read as a URI string. -S regex=string When printing DIEs for each tag value or attribute name where the 'string' reqular expression matches print the compilation unit information and its section offset. Any CU with no match is not printed. The 'string' is read as a URI string. The string cannot have spaces or other characters which are meaningful to getopt(3) and the shell will strip off quotes and other characters. So the string is assumed to be in URI style and is translated. In other words, to match 'a b' make the -S string 'a%20b' Instead of es- caping " quotes in the string, type %25, as in 'a "b' should be typed 'a%20%25b' (the ' are for exposition here, not part of the strings). Any characters can be typed in URI style, not just characters which are problematic to the shell or getopt. The -S any= and -S regex= options are only usable if the library func- tions required are found at configure time. The -W option is a modifier to the -S option, and increases the amount of output -W prints. An example v modifier to the -S option is shown below. And we show the -W in context with a -S option. -S vmatch=string1 Prints information about the DIEs that -S matches and prints the count of occurrences -S match=string1 -W Prints the parent tree and the children tree for the DIEs that -S matches. -S match=string2 -Wp Prints the parent tree for the DIEs that -S matches. -S match=string3 -Wc Prints the parent tree for the DIEs that -S matches. OTHER OPTIONS -# number This option controls internal debugging output, higher numbers mean more debug actions. See the source code. -x name=/p/a/t/h.conf The file path given is the name of a file assumed to be a dwarf- dump.conf-like file. The file path is read as a URI string. -x abi=ppc Selects the abi (from a dwarfdump.conf file) to be used in printing frame information (here using ppc as an example). The abi is read as a URI string. -x tied=/t/i/depath Used when opening a main object that is a .dwo or .dwp file. The tied file path names the executable which has the .de- bug_addr section that may be referred to from the main object. See Split Objects (aka Debug Fission). -x line5=s2l Normally used only to test libdwarf interfaces. There are 4 different interface function sets and to ensure they all work this option lets us choose which to use. The options are 's2l' (default, Allows standard and two-level line tables using the latest interface functions), 'std' (Allows standard single level line tables using the latest interface functions), 'orig' (al- lows DWARF2,3,4 original line tables using an older interface function set), 'orig2l' (allows original line tables and some two-level line tables using an older interface set). -P When checking this adds the list of compilation-unit names seen for each producer-compiler to the printed checking results. -q When a URI is found and translated while reading the command line, be quiet about the URI translation. That is, don't print the original and translated option strings. -E Turns on printing object-internal header data for some systems (for Unix/Linux does nothing). -u cuname Turns on selective printing of DIEs (printing like -i). Only the DIEs for a compilation unit that match the name provided are printed. If the compilation unit is ./a/b/c.c the 'cuname' you provide should be c.c as the characters through the final path- separating / are ignored. If 'cuname' begins with a / then the entire name string of a compilation unit must match 'cuname'. The 'cuname' is read as a URI string. -U Turn off the URI interpretation of the command line strings en- tirely. Must be be on the command line before any URI strings encountered to be fully effective. -z No longer supported. FILES dwarfdump ./dwarfdump.conf $(HOME)/.dwarfdump.conf $(HOME)/dwarfdump.conf <install-prefix>/lib/dwarfdump.conf NOTES In some cases compilers use DW_FORM_data1 (for example) and in such cases the signedness of the value must be taken from context. Rather than attempt to determine the context, dwarfdump prints the value with both signednesses whenever there is ambiguity about the correct inter- pretation. For example, "DW_AT_const_value 176(as signed = -80)". For normal DWARF consumers that correctly and fully evaluate all attributes there is no ambiguity of signedness: the ambiguity for dwarfdump is due to dwarfdump evaluating DIEs in a simple order and not keeping track of much context. BUGS Support for DWARF3 is being completed but may not be complete. DWARFDUMP()
NAME | SYNOPSIS | DESCRIPTION | URI STYLE INPUT STRINGS | PRINTING OPTIONS | CHECKING OPTIONS | OPTION MODIFIERS | SELECTIVE ENTRY PRINTING | OTHER OPTIONS | FILES | NOTES | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dwarfdump&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>