FreeBSD Manual Pages
EPSTOOL(1) General Commands Manual EPSTOOL(1) NAME epstool - Edit preview images and fix bounding boxes in EPS files. SYNOPSIS epstool command [ options ] inputfile outputfile DESCRIPTION epstool is a utility to create or extract preview images in EPS files. It can also calculate optimal bounding boxes. EPS (Encapsulated PostScript Format) EPS is a specialised form of a PostScript file that complies with the Document Structuring Conventions (DSC) and is intended to be embedded inside another PostScript file. An EPS file must contain a special first line that identifies it as an EPS file (e.g. %!PS-Adobe-3.0 EPSF-3.0) and it must contain a %%BoundingBox: line. The EPS file only draws within the rectangle defined by the bounding box. The PostScript code must avoid using PostScript operators that would interfere with the embedding. These include operators with global effects such as changing the page size and changing the half tone screen. PREVIEWS EPS files may contain a preview to be used by programs that can't in- terpret the PostScript code. There are three ways to add a preview to an EPS file. Interchange This preview is included within PostScript comments in a section marked %%BeginPreview: / %%EndPreview. The actual image data is stored in hexadecimal format. This format is most commonly used on Unix. DOS EPS The preview is a TIFF or Windows Metafile. A DOS EPS file has a 30 byte binary header which gives offsets and lengths for the PostScript, TIFF and Windows Metafile sections. You can't send a DOS EPS file directly to a printer - you have to remove the bi- nary header and preview first. This format is most commonly used on MS-Windows. PICT The preview is in PICT format stored in the resource fork of the file. This format is most commonly used on the Macinstosh. Ep- stool provides limited support for this format. COMMANDS (one only): -t4, --add-tiff4-preview Add a TIFF 4 preview. The preview is monochrome and is intended for use with old programs that won't read TIFF6, such as Word Perfect 5.1 for DOS. -t6u, --add-tiff6u-preview Add a TIFF 6 uncompressed preview. See --add-tiff6p-preview for how to add a greyscale or monochrome preview. -t6p, --add-tiff6p-preview Add a TIFF 6 preview compressed with packbits (simple run length encoding). The preview will normally be full colour, but you can make it greyscale by adding the option --device bmpgray or --de- vice pgmraw, or monochrome using --device bmpmono or --device pbmraw. -tg, --add-tiff-preview Add a TIFF preview using ghostscript to generate the TIFF file. You must specify a suitable TIFF device using --device. If you want a compressed monochrome image, you might use --device tiffg3. -i, --add-interchange-preview Add a monochrome interchange preview. -w, --add-metafile-preview Add a Windows Metafile (WMF) preview. The metafile will contain a bitmap, not vector information. The preview will normally be full colour. See --add-tiff6p-preview for how to add a greyscale or monochrome preview. --add-pict-preview Add a Mac PICT preview. EPSF files with PICT previews can gen- erally be used only on Mac computers. The preview will be full colour. The AppleSingle and MacBinary formats will contain the EPSF and the preview. The AppleDouble or Resource format will contain the preview only and needs to accompany the original EPSF file. To specify the file format use --mac-single, --mac-double, --mac-binary or --mac-rsrc. --add-user-preview filename Add a user supplied image as a preview. The image can be a Win- dows bitmap, a PBMPLUS file, a TIFF image or a Windows Metafile. Window bitmaps and PBMPLUS files will be converted to TIFF6 com- pressed with packbits. TIFF and Windows Metafile images will be added unchanged. --bitmap Create a bitmap of the area within the EPS bounding box. The bitmap type must be specified with --device. If processing a DCS 2.0 file, the separation can be specified with --page-num- ber. --copy Copy the EPS file. This is generally used with the --bbox option to update the bounding box. --dcs2-multi Convert DCS 2.0 separations to multiple files. See DCS 2.0. If the output name is out.eps, then the separations would be named out.eps.Cyan etc. --dcs2-single Convert DCS 2.0 separations to a single file. See DCS 2.0. --dcs2-report Write the separation names, lengths and CMYK values to standard output. This can be used to identify if a DCS 2.0 file is miss- ing the composite page or preview. --dump Display some information about the file type and DSC comments. -p, --extract-postscript Extract the PostScript section from a DOS EPS file. -v, --extract-preview Extract the preview section from a DOS EPS file. -h, --help Display a summary of the epstool commands and options. --test-eps Partially test if a file complies with the EPSF specification. OPTIONS -b, --bbox Calculate the bounding box using the ghostscript bbox device and update in the EPS file. --combine-separations filename Combine the separations of the input DCS 2.0 file with those of this file. It is an error if the bounding boxes do not match or they contain separations with the same name. This option must be used with --dcs2-multi or --dcs2-single. The composite page may later need to be updated with --replace-composite. --combine-tolerance pts When using --combine-separations, allow the bounding boxes to vary by up to pts points. The default is 0 so the bounding boxes must match exactly. --custom-colours filename When using --replace-composite on a DCS 2.0 file, use the colours specified in this file in preference to those specified in the composite page. -d, --debug Be more verbose about progress. Do not remove temporary files. --device name Specify a ghostscript device to be used when creating the pre- view or bitmap. For --add-tiff-preview this must be one of the ghostscript tiff devices (e.g. tiffg3, tiff24nc). For any other preview, it must be one of the bmp or pbmplus devices (e.g. bmpgray, bmp16m, pgmraw, ppmraw). For bitmap output (--bitmap) it can be any ghostscript bitmap device. --doseps-reverse When writing a DOS EPS file (TIFF or WMF preview), the default is to write the PostScript before the preview. Using --doseps-reverse puts the preview before the PostScript section, which is required by some buggy programs. Either order is cor- rect. --dpi resolution Set the resolution of the preview or bitmap. The default is 72 dpi. --dpi-render resolution Render at a higher resolution set by --dpi-render , then down- sample to the resolution set by --dpi. This works when adding a preview image or using --replace-composite , but not when using --bitmap. This improves the preview quality when the original contains a pre-rendered image and --dpi-render is set to match the original target printer. --ignore-information Ignore information messages from the DSC parser. Use at your own risk. These messages usually indicate that something is wrong with an EPS file, but that most EPS handlers probably won't care. An example is a line with more than 255 characters. --ignore-warnings Ignore warnings from the DSC parser. Use at your own risk. These messages are usually about faults in the DSC comments that are recoverable by epstool, but may confuse other EPS handlers. An example is a bounding box that incorrectly uses floating point numbers instead of integer. --ignore-errors Ignore warnings from the DSC parser. Use at your own risk. You really should fix the EPS file first. --gs command Specify the name the ghostscript program. On Unix the default is gs. On Windows, epstool will check the registry for installed versions of ghostscript and use the latest, otherwise it will use gswin32c.exe. --gs-args arguments Specify additional Ghostscript arguments. This might be used to select anti-aliasing with "-dTextAlphaBits=4 -dGraphicsAl- phaBits=4" --output filename Specify the output file (instead of using the second file para- meter). Using the filename - causes epstool to write to stan- dard output, which requires the use of --quiet. --mac-binary When adding a PICT preview, use the MacBinary I format. for the Mac --mac-double When adding a PICT preview, use the AppleDouble format for the Mac. --mac-rsrc When adding a PICT preview, use the Resource format for the Mac. --mac-single When adding a PICT preview, use the AppleSingle format for the Mac. --missing-separations When writing a DCS 2.0 file, epstool will normally fail if a separation is missing. When this option is used, it will remove references to missing separations when writing the file. --page-number page When creating a bitmap with --device from a DCS 2.0 file, page specifies the separation to be used. Page 1 is the composite and page 2 is the first separation. Use --dcs2-report to get the list of separations. --quiet Try to run without writing to standard output. --rename-separation oldname newname When copying a DCS 2.0 file with --dcs2-multi or --dcs2-single, rename separation with oldname to newname. This option implies --missing-separations. It is assumed that the new name is just an alias for the same colour and that the CMYK or RGB values for the separation are not changed. This option may be used multi- ple times. This must be used if the input file incorrectly has two separations of the same name. --replace-composite Some DCS 2.0 files do not have an image in the composite page. This option replaces the composite page with a CMYK image de- rived from the separations. This option must be used with --dcs2-multi or --dcs2-single. See also the options --dpi and --custom-colours. MACINTOSH The Macintosh does not use a flat file system. Each file can have a data fork and a resource fork. EPSF files have the PostScript in the data fork, and optionally have a preview in the resource fork as a PICT image. In addition, file type is obtained from the finder info rather than a file extension. File types use a four character code such as "EPSF" or "PICT". When Macintosh files are copied to a foreign file system, the resource fork may be left behind. Alternatives to retain the resource fork are to package the finder data, data fork and re- source fork in a single MacBinary or AppleSingle file, or to put the data fork in a flat file and the finder info and resource fork in an AppleDouble file. The Mac OSX finder will handle AppleDouble files au- tomatically when copying files to and from a foreign file system. When copying test.eps to a foreign file system, the data fork would be writ- ten as test.eps and the finder info and resource fork to the AppleDou- ble file ._test.eps or .AppleDouble/test.eps. Epstool can read MacBinary and AppleSingle files. It can write MacBi- nary I, AppleSingle, AppleDouble or Resource files. Files written by epstool will have type EPSF and creator MSWD. When adding a preview to test.eps, it is suggested that you create the MacBinary file test.eps.bin. On a Macintosh computer you then need to extract it with StuffIt Expander. Another alternative is to write the AppleDouble file to ._test.eps then copy both files to a file system accessible to a Mac computer. If the output file name starts with . then AppleDouble will be assumed, otherwise if it ends with .as then AppleSingle will be assumed, other- wise if it ends with .rsrc or /rsrc then Resource will be assumed, oth- erwise MacBinary will be assumed. When writing a MacBinary file, it is recommended that you end the filename in .bin. To force the file type, use --mac-single, --mac-double, --mac-binary or --mac-rsrc. On Mac OS X you can access a file's resource fork from command line tools by appending /rsrc to the original file name. The easiest way to add a preview to the file test.eps on Mac OS X is to let epstool write in --mac-rsrc format to test.eps/rsrc (see Examples). DESKTOP COLOR SEPARATIONS (DCS 2.0) The Desktop Color Separation (DCS) image file format contains a low resolution preview, a main file with the full resolution composite im- age, and colour separations with full resolution separated plates. The separations will typically contain Cyan, Magenta, Yellow, Black and possibly spot colours. There are two versions of DCS 2.0. Multiple File The main file contains %%PlateFile: (name) EPS Local filename comments which give the filenames of the separation plates. The main file may contain a low resolution DOS EPS preview. The separation files do not contain previews. Single File This is an abuse of the EPS specification. The single file con- tains the main file and the separations concatenated together, which makes the DSC comments incorrect. The main file specifies the byte offsets to the separations using %%PlateFile: (name) EPS #offset size. The single file may then be placed inside a DOS EPS file with a low resolution preview. By default, epstool writes single file DCS 2.0. Epstool can add previews to single and multiple file DCS 2.0. It can split single file DCS 2.0 into multiple files and vice versa. This al- lows a single file DCS 2.0 to be split, the composite image replaced, a new preview created, and then be recombined into a single file. Some DCS 2.0 files do not have an image in the composite page. To de- termine if the composite page does not contain an image, use --dcs2-re- port and look to see if the composite section is very short. Using --dcs2-single --replace-composite replaces the composite page with the headers of the original composite page and a body containing a CMYK im- age derived from the separations. Set the resolution of the CMYK image using --dpi. When replacing the composite page with a CMYK image using --re- place-composite, the --custom-colours option is useful for dealing with DCS 2.0 files that have incorrect CMYK colours, for example specifying that the varnish layer is grey. Each line of the CMYK colours file is formatted like a DSC %%CMYKCustomColor: or %%RGBCustomColor: line, as shown in the example below. %%CMYKCustomColor: 0.00 0.00 0.00 0.00 Varnish %%CMYKCustomColor: 1.00 0.68 0.00 0.12 (Dark Blue) %%RGBCustomColor: 0.5 0.0 0.0 (Dark Red) DCS2 files should not have two separations with the same name. Epstool will not allow a DCS2 output file to have duplicate separation names. Use --rename-separation to resolve this. EXAMPLES Add colour preview (24bit/pixel) to EPS file epstool -t6p tiger.eps output.eps Add TIFF (G3 Fax) preview to tiger.eps. epstool --add-tiff-preview --device tiffg3 tiger.eps out- put.eps Any GS TIFF device can be used, e.g. tiffg4, tiffpack Extract TIFF preview from tiger.eps epstool -v tiger.eps tiger.tif Fix incorrect %%BoundingBox then add TIFF4 preview. epstool --bbox -t4 golfer.eps output.eps Adjust the BoundingBox of an existing EPS file, but don't add a pre- view: epstool --copy --bbox input.eps output.eps Add user supplied Windows Metafile to EPS file. epstool --add-user-preview logo.wmf logo.eps output.eps Typically used when an application can export EPS and WMF separately but can't export EPS with WMF preview. Add a PICT preview and write an AppleDouble file. epstool --add-pict-preview --mac-double tiger.eps ._tiger.eps To be used by a Mac, both tiger.eps and ._tiger.eps need to be on a foreign file system accessible to the Mac. Add a PICT preview, overwriting the existing resources. epstool --add-pict-preview --mac-rsrc tiger.eps tiger.eps/rsrc On Mac OS X you can access a file's resource fork from command line tools by appending "/rsrc" to the file's original name. NOTES When adding a WMF preview to an EPS file using -add-user-preview file- name, the placeable metafile header is removed from the metafile as it is put into the EPS file. When extracting a WMF preview from an EPS file, a placeable metafile header is created from the EPS BoundingBox information. This placeable metafile header assumes that the WMF has its origin at (0,0), which might not be correct. When epstool is creating a TIFF or WMF preview, it will convert palette colour images into 24-bit/pixel. The environment variable TEMP should point to a writeable directory for temporary files. If not defined, /tmp will be used for Unix and the current directory will be used for other platforms. AUTHOR epstool was written by Russell Lang <gsview@ghostgum.com.au> This man page was contributed by Martin Pitt <martin@piware.de> for the Debian GNU/Linux system (but may be used by others). Martin Pitt and Russell Lang 2005-06-10 EPSTOOL(1)
NAME | SYNOPSIS | DESCRIPTION | COMMANDS (one only): | OPTIONS | MACINTOSH | DESKTOP COLOR SEPARATIONS (DCS 2.0) | EXAMPLES | NOTES | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=epstool&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>